Machinery and equipment for demolitions - Import export

- Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of installing the fitting for flexible connection SFU - Pressure / vacuum seal up to 0.2 bar - Disc in aluminum or stainless steel AISI 304 (upon request in AISI 316) - NBR gasket (upon request suitable for contact with food) - HNBR Therban - Viton - Gasket profile: for sealing only on the disc or covering the flanges - DN5482 splined drive shaft or ISO 5211 square, both in standard or extended length - ATEX certified version upon request - Manual, motorized or pneumatic actuators

The KN hydraulic demolition shears have a 360 degrees rotation, making effective work for demolition, scrap metal, general waste, ferrous and non-ferrous companies. Reducing waste in the quickest and most cost effective way. The KN demolition shears are one of the best quality built shears on the market today with faultless welding and high quality materials used building the shears, it takes a lot of operator malfunction to damage to shears.

BH23K32EV is the highest power breaker in the Maruzen breaker. It has extreme power and can break any kind of concrete. Not only powerful, but also it has user-friendly features. ①Anti-vibration handle To reduce the bear of the worker by vibration, BH23K32EV has an anti-vibration handle. Vibration level: 7.79m/s² ②Anti bouncing To prevent bouncing the moil point or chisel, a worker can aim the point to break accurately. It means this feature makes the work effective. Standard shank size: 32x160 mm (Hex) *Shank size 28x153mm (Hex) BH23K28AV is also available. Hydraulic lubricated at all times, easily maintained, and fewer parts for repair. Unlike pneumatic tools, hydraulic tools can be used in cold weather, so no restriction for operating at a lower temperature. CE certificated model

BH20EV is the most powerful one in Maruzen middle class breaker. Not only powerful but also it is equipped user-friendly features. ①Anti-vibration handle To reduce the bear of the worker by vibration, BH20EV has an anti-vibration handle. Vibration level: 8.56m/s2 ②Anti bouncing To prevent bouncing the moil point or chisel, worker can aim the point to break accurately. It means this feature makes the work effective. Standard shank size: 25 x 108mm (Hex) Hydraulic lubricated at all times, easily maintained, and fewer parts for repair. Unlike pneumatic tools, hydraulic tools can be used in cold weather, so no restriction for operating at a lower temperature. CE certificated model

The Air Channel is used for cleaning wheat, barley, legumes and soybeans. The machine removes all kinds of light materials different from cereal grains in terms of aerodynamic properties: garbage, straw and spike fractures, various seeds, peeled shell and dust from the product by means of air flow. While the grain products are distributed homogeneously in the width of the Air Channel with the feeding table of the machine or a vibrating feeder, the light particles in it are conveyed to the upper outlet channel with the air flow coming from the bottom, and the cleaned product falls down and transferred into the system. ◾ The lighting created by the window enables the separation to be seen clearly and thus all kinds of air adjustments can be made. ◾ Manufactured in two types, this machine with vibro motor is usually used with a Peeler machine, the non-motorized one is used with a Garbage Purifier machine.

It is used to separate heavy foreign materials such as stones, glass and metal pieces or soil pieces in the grain with the help of screening method and air. The machine consists of a fixed chassis and vibrating body. The stone separator, designed considering the difference in density of stone and grain, separates the stone by directing the grain in the direction of gravity, in the opposite direction of gravity, with the help of vibration. Wheat is separated from the stones with the help of a vibrating sieve. In addition, dust is absorbed by the air aspiration provided from the ventilation line. Apart from flour and semolina factories, it is also used in all grain factories, vegetable oil factories, cocoa and coffee processing plants.

It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. FEATURES - MFDJ It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. - MFNM - Best machine in practice. - Most economic spare parts. - Long life. - Seperation of fat with intensive operation. - Nindamac helps to achive high aqualit diffrent granulation of finished product with low fat content. For high technology degermination done by Nindamac by the

While the grain is carried upwards with the anchors made of hard material resistant to abrasion formed in appropriate dimensions on the rotor in an angled semi-cylindrical body made of stainless steel, the water is absorbed by the grain by subjecting it to intensive mixing at a measured speed. It is used in grain processing plants to ensure that the desired moisture content of the grains penetrate and feed the grain sufficiently. It brings the grain to be annealed with water and provides a homogeneous mixture. At the same time, a significant amount of peeling is ensured in the grain shell as a result of friction caused by the rotor rotating at high speed. Application Fields ◾ At food industry ◾ At the dry cleaning units of the flour and semolina mills ◾ At the grain processing plants where moistening process is required

Thanks to the belt-pulley mechanism driven by an electric motor, the rotational motion is transferred to the sieve shaft. The sieve weights, which are placed unbalanced, connected to the sieve shaft, make the sieve vibrate. The position of the screen weights can be adjusted around the screen shaft in order to change the vibration amplitude of the screen. The screen is hung on the ceiling of the place where it is located by means of composite rods in order to create the vibration comfortably. Thanks to this vibration movement, in specially designed sieve boxes, the incoming product is classified and sifted according to its grain size. The product to be screened is sent to the screening area through one or more inlet pipes. Various types of silk-covered cases allow separation in seven channels. This part is directed to the outlet by the channel. After the product is sifted, it is sent to the outlet pipe on the bottom plate. It also has sight pipes for product control and monitoring.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.

By separating the flour particles adhered to and remaining in the bran, it both prevents the loss of flour and increases the efficiency. Thanks to the special pallets on the rotor that rotates horizontally, the flour is separated from the bran while being thrown towards the screen. The centrifugal directed product strikes the pore size preselected screen. Thus, it is ensured that the flour particles are directed to the outside of the sieve and the bran to the outlet channel from the inside. Applications Fields ◾ Flour Mills ◾ Semolina Mills

Bucket elevators are used to transport granular or powdered products with buckets attached to their belts from the bottom up. They are manufactured in various sizes and capacities according to the needs. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

This machine is utilised for blending of various sort of grain as asked for rates and conformity of limit before processing area or treating segment. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

Moving through the centre, the product is transported to a horizontally positioned blade rotor. During rotation, the product is pushed against the wall of the machine and the eggs, if any, are destroyed inside the machine.

Instantly measure and display of humidity and hectoliter of wheat Calculation of water flows according to the required humidity. Automatic water dosage according to the calculated water flow value Automatic water dosage according to the wheat flow variation by the connection of wheat flow control or measure unit Alarms of failure More than one humidity – hectoliter measuring unit and water the dosage unit can be controlled by the PLC control unit.

Flowing the dry cleaning of wheat, it is used for the humidity of wheat with a little consumption of water and time. At the same time, the wheat is unshelled also because of the two rotor, which turns with high speed.It can add up to 7% of water in a single flow-through.

We produce our printed fabrics using EFI-REGGIANI POWER 340cm wide direct sublimation printing machines. We can provide full color custom printings with 2400dpi and 1.024m / per hour production speed. We print SEG Backlit, Frontlit, Satin and other polyester fabrics for Sign and Advertisement, Fashion, Home Textile, International Sporting Events and more. Contact us for a special quotation on other fabric materials. zampouris.com sales@zampouris.gr +30 6958 45 45 22

ZWP is one of Germany’s largest independent gear, pinion and shaft manufacturers. We manufacture according to customer drawings and supply renowned customers from a wide variety of industries. We also supply renowned customers on an international level with our products for mining technology. Here is an overview of our production possibilities: Internal toothed rings hardened and grinded Module up to 20 mm Diameter 100 to 1,800mm Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Interlocking shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible We manufacture for different customers: mining, rail, wind power, shipping, industry and special machinery. Production is carried out according to customer drawings and standards. Further information in the first interview. We look forward hearing from you.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and ring gears. We supply already well-known manufacturers for gear boxes, drive technology and are looking forward to new customers. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / ring gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English. ZWP is looking forward hearing from you.

Brick making machines available

Made of 304 chrome 18/10 stainless steel. Its body and strainer are stainless steel. It provides long-term deterioration of tea flavor. Provides suitable use for mass consumption. It is hygienic and long-lasting. It is economical with its automatic heat control system. Water heating system has been specially designed. Provides tea brew and hot water that does not stale throughout the day. It is equipped with a rust-free shock tube resistance that boils water. Provides ergonomic use with special model taps.

Radial tarar mainly used to remove light particles and foreign materials from wheat, other cereals, at silo or directly before of grinding by means of air

Makenas compact flour mill is designed for investors who want to establish a mill in a narrow space, with small capacity and limited budget opportunities. Milling machines have been specially designed in accordance with these needs. The assembly is made on a steel construction chassis. The mill, which is designed as modular, enables capacity increase in the long term. These mills can be transferred to another place when desired. In general, both initial investment and operating costs are minimal.

The rice cake popping machine of Shinyoung Mechanics is a device that can make grain snacks, chips, cakes, etc., out of 100% natural cereals. Gluten free products using rice or corn can be made, and breakfast cereal or children’s snacks can also be made with wheat, sorghum, barley, brown rice, buckwheat, etc. Also, using various food pellets, potato chips, beans, or sweet potatoes can be made into healthy snacks without going through the frying process. As you can see in the photo, you can make grain cake with rice or wheat, and you can produce cake or chip type product using various shapes and various raw materials. ​ Users Large confectionery producer Medium and small sweets producer Snack manufacturer Rice cake maker Grain distributor or processor Large food manufacturer Medium and small food manufacturer Small local shops using local specialties or local mascot shapes For more information, please contact us !! Thank you Shinyoung Mechanics

RICE CAKE MACHINE (SYP Model) As this Shinyoung Mechanics is a company which specializes in production of the Rice Cake Popping Machine, we are keeping the No. 1 domestic sales through the 2007 SYP series and being recognized its excellence selling the product of over 1,500 units to 50 countries worldwide. Since our SYP Rice Cake Popping Machine is that design is compact and convenience is superior on the use and time, thickness, shape etc are possible to control easily, it is in wide use from store up to factory. As the 100% Grain Snack is that nutritious ingredient is excellent and consumer recognition is good, it is easy to commercialize. As of now a variety of products such as general snack (chocolate-coated, flavor-seasoned), cereal for meal substitution or diet, children snack etc are being developed and sold. Thank you

Heavy duty forestry mulchers

Machined parts or 3D additive manufacturing. Adaptable to production lines in the perfumery and cosmetics sector, packaging lines, dispensers and filling. We have a variety of materials and colors, we work with antistatic materials suitable for the sector, we have extensive experience in packaging, as well as special parts for your bottling machinery, maintenance solutions, stands for trade shows, spare parts, etc.

There is an angular disk frame-saw of MAA in-process. A sawing process is automated and produced by means of next equipment: •loading rack with transporter •angular disk machine-tool •conveyor for sawdust removal •operator's cabin •hydraulic flow of logs Advantages: •High productivity (15-25 m3, when shift work is 12 hours ) • imported components (Sati (Italy), Hidrocel (Turkey)) • Modular line design assumes possible modernization in the future; • High quality of the received material; • Using a hydraulic system, which allows you to: - Reduce the weight and dimensions of the equipment - The time for starting and accelerating the motor is a fraction of a second, which is unattainable for large electric motors (several kilowatts). - Frequent on-off, stop and reverse movements are not dangerous for the motor. -The law of movement of the shaft of the hydraulic motor can be easily changed by using the means of regulating the hydraulic drive.