Marking - diverse products - Import export

"Utility location is the process of identifying and labeling public utility mains that are underground. These mains may include lines for telecommunication, electricity distribution, natural gas, cable television, fiber optics, traffic lights, street lights, storm drains, water mains, and wastewater pipes. In some locations, major oil and gas pipelines, national defense communication lines, mass transit, rail, and road tunnels also compete for space underground." White with red frame fire services (hydrants, suction points etc.) Blue drinking water Yellow gas Green sewage and drain lines Orange hot water/steam lines for district heating White or high-voltage power lines and telecommunication cables Grey Brown pipelines for oil and other flammable liquids

The transparent and self-adhesive protective tape is suitable for the subsequent protection of markings, including painted floor markings, to protect them from wear and dirt, e.g. during forklift traffic. The surface is slightly structured to reduce the risk of slipping. Its use is therefore useful, among other things, for slippery floor markings to increase slip resistance.

Floor marking for outdoor area / car park has been especially developed as a self-adhesive floor marking tape for outdoor use on uneven / rough surfaces with very high temperature resistance, e.g. for internal car parks, for car park marking in outdoor areas, outdoor storage as well as internal road marking.

Customised labelling with large, clearly visible letters, numbering, hazardous substance symbols, company logos, etc.

UNIFLEX insert – marking up to 2" for marking hoses of any type 700 hoses per hour - 3 times faster than marking by hand Economic check: the fitting is always positioned in the right place •Compact, solid table unit •Line mark for identification of socket end, clamp position, etc •For hoses up to DN 50 •Stamp is pneumatically activated •Marking length 10 - 60 mm •Ink cartridge is horizontally mounted •Rapid replacement of ink cartridge •Accurate marking due to ink retention film •Marking area is protected by cover •Compressed air: min. 1.5 bar •Dimensions (LxWxH): 210 x 240 x 310 mm

Protects Kanban cards from dirt and abrasion KANBAN CASE for SLC boxes (small load carrier), Euro containers, Kanban boards etc.; for insertion, tear-resistant and stretchable transparent film with resetting capacity, scanner-compatible various designs and sizes: open at the side or top transparent, yellow, red, blue, green, grey, black, white material: PVC KANBAN-HOLDER for holding kanban cards, label sleeves or documents of all common formats: transparent and reusable — CLIP; universal for sticking to many surfaces from plastic containers to wooden pallet feet — OVERHANGING; for hanging over small load carriers and other containers, containers remain stackable — SELF ADHESIVE; for flexible adhesion even on uneven surfaces, can be removed without leaving residues, can be reused several times on load-bearing surfaces thanks to multi-use property — MAGNETIC; for magnetic attachment to metallic surfaces

Magnetic document windows for visual boards and metal surfaces - protects documents from dust and dirt Provide information in a clearly arranged, secured format with magnetic FATH's document windows For variable and structured information provision through secure hold on metallic surfaces e.g. of visual boards, whiteboards, documents are easily exchangeable Useable in portrait and landscape format, easy to reposition thanks to 4 magnetic sides Model: DIN A3 - 11.7" x 16.5" & DIN A4 - 8.3" x 11.7" portrait / landscape format Color coding for different key figures or topic blocks, frame color permanently enclosed between outer foil and surrounding magnetic frame Color: Yellow, red, blue, gray Material: Plastic PC

Label holder to hold labels, scanner-compatible different versions: — for magnetic mounting on metallic surfaces, e.g. shelves — for adhesion on shelves, removable without leaving any residue, reusable on supporting surfaces thanks to multi-use propertie — Side and top open — Top and right side open for quick label change, tear-resistant and stretchable transparent foil with restoring capacity — Top open, tear-resistant and stretchable transparent foil with restoring capacity Material: — Plastic PVC free — Plasctic PVC Color: — transparent — yellow — red — blue — green — black — white

Floor Markings for easy and reliable marking of parking / storage areas etc., self-adhesive;Forklift-resistant and stable floor marking with outstanding adhesive strength, suitable for almost all industrial floors, removable without leaving residue. Floor Marking Shapes: T-/L-Shape in 50 or 75 I-Shape in 50 / 75 / 100 Foot Shape 90 Floor Windows: DIN A5 - 5.8" x 8.3" 1/3 DIN A4 Portrait - 8.3" x 3.9" DIN A4 - 8.3" x 11.7" 1/2 DIN A4 Landscape - 11.7" x 4.1" Material: Plastic PVC Color: Yellow, red, blue, green, white

Strong and durable visible pocket for hanging or inserting with pre-punched hole pattern for attaching to various load carriers using optional accessories Tear-resistant and stretchable transparent foil with restoring capacity scanner-compatibl — DIN A5 Landscape - 8.3" x 5.8" — DIN A4 1/3 hoch Portrait - 8.3" x 3.9" — DIN A4 hoch Portrait - 8.3" x 11.7" Individual fastening — self-adhesive, for flexible adhesion even on uneven surfaces, removable without leaving any residue, reusable on supporting surfaces thanks to multi-use properties — for magnetic attachment even on offset or round surfaces such as lattice boxes or drums, vibration and shock resistant on machines and during transportation thanks to the strong holding power of the high-performance neodymium magnet fastening accesories — Lattice Box Clip — Plastic Pin — Compatible Plastic Tie Material: Plastic PVC Color: yellow, red, blue, green

Material: stainless steel 316L Surface treatment: machining surface Tolerence: N6 and H9 Machining method: cnc turining and milling Usage: Diver's equipment

Material: Hydex 4101 Surface treatment: machining surface Tolerence: N6 and H9 Machining method: cnc turining and milling Usage: Diver's equipment

Terminal block marking with strong hooks for safe snap mounting. Material PVC Colors White or orange Print Etching Ink or Ink Text Alphanumerical and special characters. Temperature range Shape permanence between –30°C and +60°C (–22°F to +140°F) (PVC). Resistance Flammability resistance according to L94-V0. Resistance to chemicals meets Partex Product Test Programme. Resistance to temperature and ageing meets norms of Partex Product Test Programme. Attachment Snap-on

Profile for wire, cable, circuit card and component marking. Material Semi hard PVC that complies with RoHS and Reach. Colors White and Yellow Temperature range Work temperature: From –20°C to +60°C (–4°F to +140°F). Stocking temperature: +10°C (+32 °F) to +27°C (+81°F). Resistance Flammability resistance according to UL94-V0. The substrate has excellent resistance against UV, ageing and chemicals. Performance with print depends on printing method. Attachment PT+, PTC, PTM, PM sleeves and terminal blocks.

Marking tags in credit card size Material ABS or Polyamid depending on article. Colors White or yellow are standard. For other colours, please contact Partex. Temperature range For ABS and PA11 shape permanence from 30°C to +60° (–22°F to +140°F). Storing temperature +20°C (+68°F). For adhesive labels properties are defined at room temperature +22°C (72°F). Temperature resistance in +149°C (300°F) for 24 hours and in –40°C (–40°F) for 3 days. Humidity resistance 24 hours at 38°C (–40°C) and 100% relative humidity. Resistance Chemical resistance fulfills SP2671. For the adhesive label variants material is UL recognized and CSA accepted.

Perforated self-adhesive display material with adhesive on paper base. Material Self-adhesive polyester foil Colors White or yellow. Other colours, please contact Partex. Print Laser printed Temperature range From –30°C to +120°C (–22°F to +248°F). NB! Withstands laser printing. Resistance Withstands most solvents. Attachment Self-adhesive

Perforated sheet material. Individual labels are detachable or picked in any order to facilitate mounting and overview. Material Polyester foil, specially pre-processed for printing. Colors Sheet with white on one side and yellow on the other side. Print Laser printed Temperature range From –30°C to +120°C (–22°F to +248°F). NB! Withstands laser printing. Resistance Withstands most solvents. Attachment PT+, PTZ+, PTC, PM, PS

PLT is a serie of labels primarily for thermal transfer printing. Its material is UL approved self adhesive polyester. 1-track or 3-track, 38 mm (standard) or 76 mm core diameter and perforated. The PLT range also includes adhesive, self-laminating and printable wrap-around labels. Its material is UL approved MT310 transparent polyester. Material UL approved polyester with acrylic based permanent adhesive. UL approved MT310 transparent polyester with acrylic based adhesive (wrap-around) Colors yellow, silver, white yellow, white (wrap-around) Print Printable in recommended standard thermal transfer printers with standard label design software. Temperature range Service temperature range: –40°C to +150°C (–40°F to +302°F). Minimum application range: +10°C (+50°F). Storage stability: Two years stored at +21°C (+70°F) and 50% relative humidity (RH). Resistance UL code PGGU2. Excellent resistance to isopropyl alcohol, oil and water.

A module system based on the standard 17,5 mm unit. Material PVC Colors White or transparent. Print Ink Text Alphanumerical, large and small letters (0– 9, A–Ö, a– ö), standard number sequences and special characters in semi detached module strips. Temperature range From –20°C to +60°C (–4°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Programme. Resistance to temperature and ageing meets norms of Partex Product Test Programme.

Moca is a compact and powerful card printer. It has fast print speed and excellent print quality. Print Thermal transfer printing: 300 dpi print resolution Printing speed: 500 cards/hour monochrome Temperature range Operating temperature: +15ºC to +30ºC Storage temperature: -5ºC to +55ºC Operating humidity: 20% to 65% non-condensing Storage humidity: 20% to 70% non-condensing To obtain the best printing result, the temperature of the profile shouldn’t be lower then +20ºC. Measurement 395x200x250 (LxWxH

Cassette comprises of two identical lids, linked by a hinge on one side. Material Polystyrene. Colors Red for PA02 and blue for PA1. Temperature range From –30°C to +60°C.

Plotter with plates for PARTEX neutral wire, cable, component and terminal markers. Print Printing method: Plotter pens with etching ink Drawing speed: Max 40mm/s (1.57 tum/s) Temperature range Working temperature: +10ºC to +35ºC ( 50ºF to 95ºF) Storage temperature: -10ºC to +50ºC ( 14ºF to 122ºF) Recommended profile temperature: +20°C ( 68ºF) Resistance The products intended for MK500 is tested according to Partex Product Test Programme by the Swedish Test and Research Institute. Mark Type Groups MK500 print on : Wire markers PA+02 PA+1 PA+2 Open wire markers PC-10 PC-20 PC-30 PC-40 Cable markers PK2 POH Component markers PN PS Terminal block marking TX-61 TX-96

Open combination marking with locking function. Material Halogen free polyamide 6.6. Colors Standard colours yellow and white and international colour code for 0-9. Print Hot stamped. Text Alphanumerical and special. Temperature range From –30°C to +100°C (–22°F to +212°F). Resistance Excellent resistance to petrol, fats, oils, esters and ketones.

Self-locking cable ties with specially designed end for easier insertion into the lock and the Partex punched cable marking. Material Nylon 6.6 Colors Black and Natural. Also in Light blue PKB25100A. And in Light Green or Light red for PKB25200A. Temperature range For continuous use between –40°C and +85°C (–40°F and +185°F). Resistance Flame resistance in accordance with UL94V-2. Tensile strength in accordance with mil 2319OE. Good resistance to chemicals, gamma and UV radiation.

Installation tools for easy transfer of the marker to the wire. The MDH holder contains 20 MD type installation tools and is fitted with a snap-hook. Material MD – Acetal. MDH – Polystyrene. Colors Red for PA02 or blue for PA1.

Flat, hard-wearing holder for combination or multi-character marking using Partex PK(Z), POK and PO(Z)-09. Material PKH070 – cadmium and silicon free PVC. PKH70 POL – Polyamide 6.6 (halogen free). PKH110 POL – Polyamide 6.6 (halogen free). Colors Black, homogeneously coloured. Temperature range Shape permanent between –30°C and +70°C (–22°F to +158°F). Resistance Self-extinguishing Good resistance to chemicals, gamma and UV radiation. Polyamide 6.6 resistant to organic solvents with limited resistance against acids and alkalics Attachment Cable tie

Flat, wear resistant holder with two raised anchor points for quick and easy threading of cable ties. Material PVC. Colors Standard colour is black. Yellow, white, red, green and blue for direct marking in MK1 mini plotter. Other colours, please contact Partex. Print Plotter pen Temperature range Remains undeformed from –30°C to +60°C (–22°F to +140°F). Resistance Good resistance to chemicals, gamma and UV adiation. Attachment Cable tie

Automatic or manual cable tie fixing tool for stainless steel cable ties

Modern thermal transfer printer for Partex PO-profiles. Print Thermal transfer printing: 300 dpi print resolution. Printing speed: 125 mm/s. Temperature range Operating temperature: +10°C to +35°C Humidity: 30 - 85 % not condensing To obtain the best printing result, the temperature of the profile shouldn’t be lower then +25°C. Measurements: (L x W x H): 446 x 242 x 275mm