Mechanical components - Import export

The SM line is equipped with a knurled micrometer knob with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The highest accuracy class “Ultra-Precision plus” impresses with an accuracy of 0.0005 mm, thus 0.5 µm. Due to the fact that the control unit of the Föhrenbach slides is compatible with the interfaces of almost all measuring systems, this extraordinary repeatability does not depend on a particular system or a specific provider. Föhrenbach profiled guide slides with integrated linear motor are available in the series PFL (with bellows covers) and PCL (with sheet metal covers). For both series three sizes are available. We developed three resp. two linear motors of different force.

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

Our cross roller guide rails are freely interchangeable standard elements. Our guide rails allow the assembly of extremely rigid and precise linear guides without any play. Benefits Able to carry high loads running extremely smooth require little space long serviceable life Mounting instructions: When mounting the guide rails make sure the bearing surfaces have been machined in a parallel manner and are to the angle. The tolerances of the bearing and mounting surfaces shall conform to the process tolerances of the guide rails (standard quality). The prestress applied depends on the respective mounting conditions, on the rigidity of the assembled slide structure respectively. We recommend to apply a prestress equivalent to a value between 5 and 20 % of the maximum admissible load. However, the load carrying ability of the overall guide rail structure thus realized will, at any case, be reduced by the prestress applied.

The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RK line is equipped with a cross type handle and, from size 300 on, with a hand wheel. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The SH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 400 can, on option, also be furnished with a 0.01 mm scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The SK line is equipped with a cross type crank handle and, from size 300 on, with a hand wheel. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The SE line is equipped with end plates and suits for attachment of stops, micrometers, cylinders etc. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides. Even under high loads they assure smooth running operation, free from play and guarantee an extremely precise lengthwise motion. As compared to guide rails (dovetail type) they enable exact and easy displacement of parts, free from play.

The V shape of the shaft support is the result of purposeful internal development work at Föhrenbach. The most important advantage comes from having the greatest possible distance between the shafts and above all in the lay-out of the four ball-bearing housings whose loadbearing rows of balls are located underneath the shaft. The unitized, modular type like design realized with these devices enables to cover a wide range of application specific solutions. Manufactured in standard widths from 75 to 425 mm and in lenghts of up to 4000 mm, the products are designed to provide solutions that allow to cover almost all handling and mounting tasks that need to be met. An experience of long standing assures for competent solutions.

Discover EWOQE's comprehensive service offering in 3D printing for mechanical components and prototype construction! We provide a variety of advanced 3D printing techniques such as FDM, SLS, MJF, and SLA to meet your needs and produce high-precision components. Our experienced team assists in the development and manufacturing of prototypes as well as functional mechanical parts. Understanding the importance of quick iterations, we offer rapid turnaround times to shorten your development cycles and optimize your time-to-market. With our advanced 3D printing technologies, we can achieve complex geometries and fine details to ensure your components meet the highest quality standards. Whether you require prototypes for product development, individual pieces for specific applications, or series production, we have the solution for you. Depend on EWOQE as your trusted partner in 3D printing for mechanical components and prototype construction.

miniature machine parts manufactured by sliding head multi axis CNC lathe Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

wheel shaft manufactured by CNC multi-axis lathe machining length: 214.5 mm diameter: 6 mm material: stainless steel 303 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

The company is subcontractor of metal details and components of furniture industry, as some of the main products are: metal construction for tables Folding mechanism for beds, sofas and stools Medical beds with adjustable height А device for lifting patients Feet for tables, sofas and stools Feet for tables, sofas and stools Bunk beds Beds and desks that fold to the wall Mechanisms for lifting and lowering of the mattress Metal cabinets Metal boxes

The company have Milling machine with vertical center with 3 and 5 axis with CNC controls. Maximum size of details which we can work is 1200x600x600 mm and maximum weight – 1200 kg. We produce details from all types of steels, crude iron and non-ferrous metals. We possess with instrumental equipment for producing and repairing of devices and instruments, needed for different production of the company. The main details which we produce are: Pneumatic dividers for compressors Тooth wheels Hydraulic distributors Parts and components for mechanical engineering Details and units for the food industry

Depending on the purpose of use of wall panels, the areas in which they are used also vary. Boards are used a lot. They have different shapes. In general, wall panels are preferred the most. First of all, it is necessary to know what a wall panel is. It is used as an electrical panel. Among the electrical distribution boards, there are types that have a wall-decked design. It is placed on the plaster. Their models are generally different and convenient.

IKO Precision Elevating Table TZ is an elevating table that performs precision positioning in the up and down directions by using the wedge mechanism.The wedge mechanism applied IKO Linear Way has achieved both high accuracy and high rigidity with a compact size.

The IKO Alignment Module AM is a positioning module developed for alignment stages by combining high rigidity Crossed Roller Bearings and Linear Way E with Precision Positioning Table TU. Alignment stages can be configured without adjusting the height of each alignment module, since the height tolerance is managed with high accuracy of ±10 μm.