Mortars - Import export

mortar and head of pestle made from stainless steel*mortar frame and handle of pestle made from powdercoated steel*slip resistant feet**not autoclavable*not dishwasher-safe

White or colored, self-leveling design floor of class C40-F10-A12 according to EN 13813. Hardens fast and with low tension in a layer thickness of 1 – 30 mm. Maleki-DFS 410 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1415

Shrinkage-free fast-setting mortar for construction. Hardens fast and with low tension. Can be mixed with quartz sand for higher layer thickness. Maleki-VM 530 is ideal for filling holes and cavities. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1442

High performance and extreme acid resistant mortar for protection of mineral substrates in acid-proof installations and industrial areas. Extreme high chemical resistance at the range of pH 0 – 14 according to EN 12808. Maleki-TPC 200 sets new standards in the protection of mineral surfaces against high acid loads and extreme thermal stresses. Maleki-TPC 200 can withstand both concentrated acids and temperatures of up to 1350°C. Both existing and new concrete surfaces can thus be permanently protected. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1310

Innovative waterproofing with high chemical resistance for canal and industrial construction. Waterproof up to 1.5 bar at a layer thickness of 4 mm. Maleki-SWP 270 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected against stress for longer against stresses that occur. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1312

High performance, environmentally friendly silicate mortar for sewage water areas. Extreme resistance against chemicals in the range of pH 0 – 14. Maleki-SBS 860 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected for longer against stresses that occur. The material is an ideal supplement for work in higher layer thicknesses and can be used in combination with Maleki-SWP 270. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1520

Self-leveling industrial floor of strength class C50-F10-A9 in accordance with EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 400 is the perfect solution for areas with the highest demands on resilience and environmental protection. Choose for quality, sustainability and performance with Maleki-IFS 400. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1410

Self-leveling, flexible floor mortar for critical substrates. Can be used as an intermediate layer on cracked surfaces. Maleki-FS 440 is used wherever cracked substrates make processing with conventional levelling compounds impossible. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1413

Self-leveling flowing screed of strength class C40-F7 in accordance with EN 13813. Hardens with low tension with a layer thickness of 5 – 70 mm. Maleki-FEC 370 is ideal for surfaces where a cost-effective solution for higher layer thicknesses is required. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1429

Flexible, crack-bridging two-component waterproofing. As a flexible waterproofing in interior and exterior areas for the creation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 250 Flex is a universally applicable flexible Waterproofing slurry for a wide range of applications. Due to its high waterproofness and resistance, it can even be used with corrosive media. Packaging unit: 10 kg bucket, 240 kg per pallet, other packaging sizes on request – Article-No.: 1315

One-component mineral filling and reprofiling mortar for the preparation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 240 is a universal waterproofing mortar for a wide range of applications. The material is an ideal supplement for waterproofing work in thicker layers and can be used in combination with Maleki-DS 220. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1329

One-component mineral waterproofing slurry. For the preparation of a waterproof coating on concrete and other cementitious substrates. Maleki-DS 220 is a universal waterproofing mortar for a wide range of applications. Thanks to its high waterproofness and durability, it can be used even under the most difficult conditions. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1314

Self-leveling design floor coating of class C40-F10-A12 in accordance with EN 13813. Hardens fast and with low tension in a layer thickness of 2 – 40 mm. Maleki-DFS 430 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1433

Self-leveling industrial floor for high chemical and thermal load. Class C50-F10-A12 according to EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 500 is the perfect solution for areas with the highest demands on mechanical, chemical and thermal resistance. Choose for quality, sustainability and performance with Maleki-IFS 500. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1435

Easy-to-use, self-leveling floor coating of strength class C35-F7-A22 in accordance with EN 13813. Hardens with low tension in a layer thickness of 2 – 50 mm. Maleki-BV 310 is ideal for surfaces where a cost-effective solution is required. Suitable both as a levelling layer and as a final coating for lighter loads. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1412

Versatile environmentally friendly repair mortar for concrete and masonry. For repair and coating work. Maleki-RM 500 is ideal for filling holes and cavities, especially on wall surfaces. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1416

Innovative and environmentally friendly smoothing mortar. Hardens fast and with low tension with layer thickness up to 30 mm. Maleki-SM 735 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1515

Not only do they all add style to homes but they are also very useful for grinding, crushing and mixing herbs and spices. An absolute essential for any home. We also have an excellent variety, they are available 3 different colours (white, grey, black). Your customers are always adding to their kitchen supplies and with these amazing prices, you can charge a more than reasonable price so with that and its very high quality they won't be able to resist.

quantity in a box :100 ad/pcs carton box size :680 x 400 x 430 carton box weight :8,70 kg

• with pestle • made from natural granite • for crushing and grinding herbs and spices

Composite mortars are characterized by their easy handling and guarantee a fastening without expansion pressure with a high load-bearing capacity at the same time. The possible uses of the composite mortars are varied, so there are a large number of possible applications for industrial and private use. The coordinated two-component composite mortar systems enable precise and simple dosing of the mortar mass.

- Cement-based, high performance, elastic thin plaster mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. SCOPE OF APPLICATION - On rough plaster indoors and outdoors in buildings - Plastering of thermal insulation boards in jacketing thermal insulation systems

- Cement-based, high performance, elastic thin insulation plate adhesive mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. - High bonding strength - Ease of application SCOPE OF APPLICATION - Bonding of plates indoors and outdoors in buildings, - On surfaces such as concrete, plaster, screed brick

- Cement-based, one-component, ready-to-use plaster and repair mortar containing special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In the interior plastering and interior restoration works in the buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.

Including White Cement, Grey Cement, Mortar and Adhesive