Numerical control systems - minicomputers and mainframes - Import export

ZOT121PCP(TLI)(Touch Panel and LCM Integration) is a revolutional open frame worry-free(calibration-free, foggy free, dust-proof, water proof) 12.1" projective capacitive 10 points multi-touch touchscreen monitor with hdmi/vga/dvi/usb/audio. With 12.1" 10 points multi-touch touchscreen Touch Panel and LCM Integratio structure, ZOT121PCP(TLI) is a revolutional solution for the outdoor water proof touchscreen for mission critical applications. Because PCAP sensor's X/Y channels are consolidated in individual columns and rows, it makes multi-touch possible and calibration-free: With the diamon transparent conductive layer is attached to the LCD module,the touch panel of ZOT121PCP(TLI) integrated the state-of-art high quality sensitivity, durability and optical transparency touchscreen with the industrial display. The ZOT121PCP(TLI) is calibration-free, foggy free, dust-proof, water proof and most of all: worry free.

12.1 inch Touch Screen Panel PC with RFID Reader Fully tempered glass front bezel, trut flat. 12.1 inch TFT touch color screen, full interface display, Integrated with Intel J1900 processor Dual 125KHz-EM or 13.56MHz-Mifare RFID reading capacity Windows or Linux operating system support

This Waterproof Panel PC , we designed for one meat product manufacturer, whose working environment is in high humidity, so This Full IP67 Panel PC is possible to be swashed or flushed from water. Since the whole panel pc is IP67 rated sealed, which means it's completely waterproof and dust proof . This IP67 rated touch screen panel PC comes with a 15 inch LCD(1024 * 768 pixel) display with a resistive touch screen and a LED backlight that can provide about 400 nits of brightness. Its interfaces consists of waterproof IP67 rating I/O ports that are highly configurable. The smaller or bigger display is selectable. The waterproof IP67 rated connectors for this Waterproof Panel PCs included LAN, USB ports, serial ports(COM.) and DC power input.

7 inch Android Flat Panel Touch Screen Industrial Tablet PC Comply with IP64 Rating Powered by Qualcomm Quad core processor 4xARM Cortex A7 1.1GHz core IPS LCD Panel with 1280*800 capacitive touch screen 178 wide viewing angle Rich extensions: RS232, Gpio OTG SIM TF 4G Wi-Fi Bluetooth GPS ACC NFC Reader, 13.56mhz RFID Reader 5.0MP rear / 2.0MP front camera

Bitmain Antminer S19 Pro For Sale Bitmain Antminer S19 Pro (110Th/s) for sale at Offshore Miners. We offer fast and reliable doorstep delivery. Delivery will take 2 to 3 working days. Terms of Refund: All sales are final. Refund requests will not be honored until we fail to ship. The retail price indicated above does not include shipping costs, customs fees, or taxes (if applicable). Please select the model, add products to cart, fill in your desired quantity, select destination country, and shipping, and the total price will be displayed. Over 116 pieces are in stock and ready to ship as soon as your order is approved. Within the United States, shipping takes 2-3 business days, and international orders take 5-7 business days.

Thanks to its flexible operating concept – workshop-oriented programmability with HEIDENHAIN conversational programming or external programming – and its scope of features, it is especially suited for use on universal milling, drilling and boring machines for series and single-part production tool and die making manufacture of machines research and development prototype production and testing facilities repair departments educational and training institutes The TFT 15-inch color monitor shows a clear overview of all relevant information for programming, operating and inspecting the machine tool and control such as program blocks, comments and error messages. More information is provided through graphic support during program entry, test run and actual machining. The selectable split-screen display shows the part program blocks in one half of the screen and the graphics or the status display in the other half.

For many years now, the CNC PILOT has been proving itself in daily use on lathes and has earned a reputation for convenient NC programming. With the introduction of smart.Turn, HEIDENHAIN has made yet another step forward toward greater ease of use. Easily understandable program entry in forms, default setting for global values, numerous selections and straightforward graphic support ensure fast and easy operation. The new smart.Turn interface is based on the proven HEIDENHAIN-DIN PLUS. Because smart.Turn produces DIN PLUS programs. It provides both the NC programmer and the machine operator with all relevant information during program run. Thanks to its flexible design and numerous programming features, the CNC PILOT always gives you optimum support. Regardless of whether you are manufacturing single parts or batches, simple or complex workpieces, the CNC PILOT always provides the right support. The CNC PILOT is characterized by its simple operation and programming.

For more than 35 years, TNC controls from HEIDENHAIN have been proving themselves in daily use on milling, drilling and boring machines, as well as machining centers. While the controls have undergone continuous development during this period, the basic operational technique has remained the same. You will find also these principles implemented in the TNC 640, the HEIDENHAIN contouring control for milling and milling/turning operations: shop-oriented programmability with graphic support, many field-proven cycles and an operational design you'll recognize from other HEIDENHAIN controls. Shop-oriented programming You program conventional milling and drilling operations, and with the TNC 640 also turning operations, yourself at the machine, in plain language dialog—the workshop-oriented programming language from HEIDENHAIN. The TNC 640 provides you with optimum support with practical prompts, questions and expressive graphical aids—for turning operations, too.

The Industrial Panel PC # EB-156SY is specifically designed with a fully seamless metal body which effectively prevents dust and dirt into the computer case. 15.6″ 1920*1080 LED Backlight Full Flat capactive Touch Screen Multiple CPU options (Intel J1900, i3/i5) IP65 Rated Front Bezel Rich I/Os : COM, USB, LAN, HDMI/VGA… Reliable fully enclosed design through a aluminum housing, which effectively prevents dust and dirt.

Model Number: EB-LF17 17" True Flat Panel Touch Screen Intel CPU (J1900, 1037U, 3855U) up to 8GB Onboard DDR3L Memory 32GB/64GB/128GB SSD Silent, fanless design IP65 Front in Aluminum Case Fully enclosed aluminum housing design, which effectively prevents dust and dirt.

8" IPS LCD Touch Screen Intel Z83**(Z8300/Z8350) CPU Memory + eMMC: 2GB +32GB Built-in 6000mAh battery Built-in Wi-Fi & Bluetooth 1000Mbps Gigabit Lan HDMI USB3.0 with a microSD card slot for additional storage, supports up to 128GB Model Number: EB-GF38

With 9.7 inch LED backlight LCD with Projective Capacitive Touch screen, True flat design is easy to maintain and clean, to prevent water or liquid droplets to penetrate into the PC case. Supported by Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz) Fanless cooling design and Ultra-low power consumption Front IP65 Water and Dust Proof Aluminum Housing and Flat Front Panel Flat surface Screen Panel, It’s easy to clean:

The TNC 620 is compact and easy to read. The TNC 620 is a compact but versatile contouring control for up to five controlled axes. Thanks to its flexible operating concept—workshop-oriented programmability with HEIDENHAIN conversational programming or offl ine programming—and its scope of features, it is especially suited for use on universal milling, drilling and boring machines for the following: Series and single-part production Toolmaking Machine building Research and development Prototypes and pilot plants Repair departments Training and education facilities And it offers the applicable features both necessary and helpful: Universal milling machines Free contour programming Milling cycles for complex contours Fast presetting with HEIDENHAIN touch probes Drilling and boring machines Cycles for drilling, boring and spindle alignment Cycles for linear and circular point patterns Five-axis machining with swivel head and rotary table

Our TM1+7 SBC is makes a low cost, readily available, long life smart phone platform available for you to design your product around. We have designed, tested and approved the platform to make integration into your product as easy and risk free as possible. With a mix of high speed digital and RF interfaces occupying a very small space the TM1+7 presents Wi-Fi, Bluetooth, 3G GSM, GPS, CAN, I2C, GPIO, Accelerometer, Light Sensor, touchscreen Controller, LCD interfaces, two RS232 and one RS422/485 together with a powerful ARM Cortex A9 1GHz processor. Getting this range of electronics to work together reliably needs an extensive operating system that has been tested and proven to work across a range of use cases. The TM1+7 has two operating systems, Android and Linux. If you are looking for a touchscreen solution then check out our Beta C series of modular touchscreen platforms where we have integrated the TM1+7 with our LCD, touchscreen and mechanicals.

The TM range of computer on modules was designed to deliver ultra small and low cost modules that can be used in space and power limited applications. Born in the era of the Raspberry Pi and other low cost boards the TM range manages to provide not only a true embedded, long life platform at a cost that rivals consumer but also a range of supported operating systems and free in-house technical support. NXP iMX6 ARM Cortex A9 single-core processor ARM NEON coprocessor 1GB of Low Power DDR3 memory MicroSD or eMMC storage devices Wi-Fi & Bluetooth optional Up to 60 GPIO lines with selectable 1.8 or 3.3 voltage levels Extended operating temperature range Android and Ubuntu Linux LTS operating systems supported

The RE3 is the latest addition to Blue Chip Technology’s highly successful RE range of all in one ultra compact computers. Designed and manufactured at Blue Chip Technology’s facility in the heart of the UK the RE3 sets new standards for performance and integration with dual and quad-core processor options supported by class leading graphics engines to drive two independent displays. If your product requires a highly integrated computer for its heart with the best CPU performance, amazing video, CAN, Camera (without additional boards!) and 2G/3G modem support, then the RE3 is the answer.

Using our TM1 it is the ideal module for an Internet of Things (IoT) device. The TM1+6 can be used where Wi-Fi, Bluetooth and/or Ethernet is required. Together with three asynchronous RS232/422/485 ports, the TM1+6 is an extremely versatile host board which can support a wide range of applications. The TM1+6 is also used in our Beta range of embedded touch display modules by combining it with our LCD, touchscreen, mechanicals, cables and Android or Linux operating systems.

For many years now, the MANUALplus has been proving itself in daily use on cycle lathes and is characterized particularly by convenient manual machine operation. Application-oriented cycle programming enables the machinist to create and edit programs rapidly and effi ciently on the lathe. The introduction of the MANUALplus 620 extends the area of application to single-spindle CNC lathes. With the smart.Turn operating mode, HEIDENHAIN has made yet another step forward toward greater ease of use. Easily understandable program entry in forms, default setting for global values, selection options and straightforward graphic support ensure fast and easy operation. The new smart.Turn interface is based on the proven HEIDENHAIN DIN PLUS: smart.Turn creates DIN PLUS programs and provides both the NC programmer and the machine operator with all relevant information during program run.

CPU ARM Cortex 1.5 GHz quad-core GPU Mali-T720 RAM 3GB LPDDR3 Internal Memory 32GB ROM External Memory Micro SD card ( T-FLASH card), max 128GB Main Camera 13.0MP(AF) with flash led Battery 5000mAh (Replaceable battery) Display 4.5 inch IPS/AFFS 960*540 QHD industrial 500nit Sunlight Readable Touch Panel Capacitive/toughened glass 9H support glove touch/spray/Active capacitance pen

CPU 2.5G Hz x10 Cortex A72 Deca-Core 64bit RAM/ROM TWO-IN-ONE:4G+64G EMCP Touch Panel 5 point Multi-touch/Capacitive/Anti-salt fog/support capacitance pen&gloves 9H Basic Function 2G/3G/4G/BT/GPS/WIFI/FM/ Axis Accelerometer Sensor/Orientation SensorGravity Sensor/Linear Acceleration Sensor/Rotation Vector Sensor/Magnetic Field Sensor/Gyroscope Sensor Extensible Function LF/UHF RFID/ NFC/GPS+GLONASS Navigation/38K/Zigbee Camera 13.0MP(AF)with flash led/5.0MP sub Camera 2G/3G/4G Band GSM（B2/3/5/8，WCDMA （B1/2/5/8，TDSCDMA（B34/39，TD-LTE （B38/39/40/41；FDD LTE（B1/2/3/4/5/7/20)； EVDO,CDMA 1X Wifi Dual-band (2.4GHz/5Ghz) 802.11 a/b/g/n MAC/BB/RF Bluetooth: v2.1+EDR/BT 3.0+HS compliance/ Bluetooth v4.0 Low Energy (LE)

The FPGA-based Mustang-F100 accelerator card from ICP Deutschland is designated for industrial inference systems. It is primarily used for deep learning inference in real time, for video and image processing as well as for the analysis of machine and sensor data. The Mustang-F100 is based on the Intel® Arria® 10 GX1150 FPGA and is equipped with 8GB on-board DDR4 RAM. Due to its parallelism and its high degree of configuration, which is inherent in the FPGA, the Mustang-F100 can handle changing workloads and different floating-points. It also supports a variety of topologies such as AlexNet, ResNet or Yolo Tiny. From classic object recognition to video and image classification to facial recognition or image segmentation, there are virtually no limits to the target application.

TABLET+NOTEBOOK in ONE. The perfect OutdoorWorker. Jet water, dust, drop and vibration resistant. Lightweight. Powerful. An all-rounder. The BULLMAN DuraBOOK TAB R11 is a strong contender for any notebook by design. Its docking port allows it to be used with a keyboard, office docking station and vehicle docking station. Depending on the situation and the need. As a lightweight, powerful and fully rugged outdoor tablet on the go or as a full-fledged tablet PC at work with keyboard and all ports for peripherals. The housing is made of a special plastic with IP65 protection class, which protects the TAB R11 against water jets (water from all directions) and dust penetration. With MIL STD-810G, the tablet was subjected to a shake and vibration test for off-road vehicles and agricultural machinery, as well as drop test from 1.22m height on a hard plywood board.

The new PEMUX-XEW1 slot CPU card from ICP Germany is suitable for high-performance computers that are to accommodate several graphics or FPGA plug-in cards. The PEMUX Slot CPU card with its 56 PCI-Express lanes and the corresponding backplanes offers various possibilities to build high-performance systems. The PEMUX-XEW1 is a 12-layer slot CPU card and defines a new standard among slot CPU cards. It is equipped with an LGA 2066 socket that supports Intel® Xeon W processors with up to 28 cores. The four DDR4-RAM slots can accommodate a maximum of 256 GB ECC RDIMM or LRDIMM memory modules. Furthermore, the PEMUX offers eight SATA 6GB/s ports for the use of all common storage media. An M.2 2280 slot with a PCI Express x4 signal extends the possibility of equipping the system with solid state storage discs. Data security is not neglected either. In addition to the RAID 0/1/5/10 functionality, the PEMUX card offers a TPM2.0 port and an internal USB DOM header for the use...