Plastering contractors - Import export

Fiberglass mesh for indoor use. It is widely used in finishing plastering works as a reinforcing layer, in order to prevent sprinkling of the plaster. Using this mesh will increase the durability of the finish. Prevents the appearance of cracks on the surface due to changes in temperature and humidity, mechanical influences, non-compliance with the technology for preparing building compounds, etc. Doesn’t require a lot of plaster or putty. The Djofra-M glass mesh is easy to use and safe for human health and the environment. For internal work when puttingty and waterproofing surfaces, reinforcing bases with high density, repairing cracked plaster or putty. Scope of application: For internal and external work when filling and waterproofing surfaces, reinforcing substrates with high density, repairing cracked plaster or putty.

Floor levelling compounds are generally used to level a substrate so it is necessary to bond them directly to the substrate. The floor levelling compounds then leaves the surface suitable for all floor coverings, especially thin floor coverings like vinyl. Thin floor coverings require a smooth/flat surface to be applied to so that they look their best. If the floor’s surface is not smooth, when thin floor coverings are applied, it will show the floor surface’s irregularities. Cementitious Compounds With depths ranging from 3mm up to 50mm, these products are very versatile. They tend to be flowing screeds to ensure that the product self smoothes, thus providing a surface suitable for floor coverings. The finishes range from epoxy paints and resins, wood flooring, vinyl’s and ceramic tiles.

Do you need noise control within your project? Let us supply and lay a system that will meet with Part E (Sound) of the Building Regulations. If your project expects to either use Pre-completion Testing, or Robust Detail, we can supply and lay the system to your requirements. Our installers are fully trained and approved by Monarfloor Acoustics for their Tranquilt system. We even took part in the testing at Napier University when the product was undergoing testing to achieve its Robust Detail status. A system that is not suitable will fail, and certainly a system that is not installed correctly will fail!. Once the screed is laid there may be no visible sign of inadequacy but sound testing leaves no doubt as to the adequacy of the system. Avoid a failing system by using us to supply and lay your screed system. •Airborne sound •Impact sound •Flanking sound

Insulation is becoming the element of the build that requires more thought than ever before. Which insulation systems are available? What strength, density, acoustic and thermal performance does the build require? Is there minimum requirement and what performance would be preferred? Have you considered Part E and Part L of the Building Regulations? We can design insulation systems that meet your target U Value.

Wslip membrane, gas membrane, damp proof membrane, radon barrier, liquid dpm e supply and install a number of systems using polythene membrane, slip membrane from 500 gauge to Damp Proof Membrane at 1200 gauge and above. The 500G membrane performs as a separating layer rather than keeping moisture out, whereas the 1200G (and above) membranes ensure that no moisture is made available to the screed and floor coverings. Liquid damp proof membrane are suitable for moist substrates where thin screeds or floor coverings are required and where program dictates a solution is required to lay the floor coverings. Radon barrier and gas membrane can also be installed to prevent Radon entering the building by airflow. Call us to discuss your requirements.

All the sand and cement screeds we install meets with the highest standards, whether it is factory produced or site batched. All our suppliers’ materials meet with the requirements of BS EN13813. Sand and cement screeds are suitable for all conventional screed applications, including monolithic, bonded and unbounded construction. Sand and cement screeds come with a number of options to help minimise surface cracking and to increase early strength characteristics. Key facts about Sand and Cement Screeds ? Ideal for most building projects domestic to commercial ? Surface Regularity from 3mm over 2m (SR1) ? Ideal for projects with underfloor heating ? Perfect when falls in the screed are required

K- Screed has been supplied in the market for over 30 years performing excellently over that time. Key facts about K-Screed: Early installation of moisture sensitive finishes Excellent workability properties, good compaction High strength and resistance to construction traffic Can be used with underfloor heating systems Guaranteed to meet Category A or B BRE screed test requirements as per BS8204 –1 Let Speed Screed provide you with a fantastic alternative that gives you better performance at a far less inexpensive price than K-Screed, laid by our expert installers. Mapei Mapescreed 704 is that product.

Alkali-resistant fiberglass mesh 110 g, with a mesh size of 10×10 mm, professionally reinforces and powerfully fixes the surface in case of a thick plaster layer. Excellent chemical and mechanical resistance. Flame retardant, resistant to tears and sudden changes in temperature, prevents the formation of cracks in the coating layer of the plaster. Application: for reinforcing cement mortars used for screed or underfloor heating, for the manufacture of curbs, steps, walkways and other structures experiencing increased stress. Scope of application: For reinforcing plaster facades and external insulation systems, and also recommended for rooms with high humidity.

We can offer screeding solutions that will allow you to lay floor coverings (e.g. tiles, vinyl, carpets, etc.) after hours rather than days. Whatever your programme dictates, we have a screed solution to fit. So don’t let drying times hold up your programme, contact us today to discuss the options. Another bonus with fast drying screeds is that you can ‘traffic’ them quicker without having to wait for 7 days. You would have to wait for at least 7 days with a traditional screed before ‘trafficking’ it, as per BS8204. How fast you can ‘traffic’ depends on which screed solution you opt for but, once again, this can be as little as 24 hours. This can be extremely useful if time is tight in your programme. Fast drying screeds are used to reduce the drying time form months to days, which allows for early laying and installation of the chosen floor coverings. Key facts about Fast Drying Screed Allows for early foot trafficking No waiting months to lay floor coverings No need for liquid DPM on

Fiberglass mesh for indoor use. It is widely used in finishing plastering works as a reinforcing layer, in order to prevent sprinkling of the plaster. Using this mesh will increase the durability of the finish. Prevents the appearance of cracks on the surface due to changes in temperature and humidity, mechanical stress, non-observance of the technology for the preparation of building compounds, etc. Doesn’t require a lot of plaster or putty. Djofra-M glass mesh is easy to use and safe for human health and the environment. For internal work when filling and waterproofing surfaces, reinforcing substrates with increased density, repairing cracked plaster or putty