• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • prototypes- industrial

Results for

Prototypes- industrial - Import export

Slovenia

Verified by Europages

By using serial tools for the production of prototypes we can save your time The prototype pieces are the key for the efficient serial production. This is why we pay a lot of intention to all prototype processes as well as all processes before the serial production. This phase is intended for taking down all data and information which are vital for the implementation in the serial production. Based on the foreseen technology, which is the result of experience and data from the simulation equipment, we produce serial production tools for the production of prototype pieces in our company. Because we use serial tools for prototype production, we do not need additional time and special adjustments to transition to classic serial production. This gives us the advantage of being able to offer serial production within the shortest possible timeframe.

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Request for a quote

Germany

Verified by Europages

The VX2000 is a 3D printer for industrial applications. It is a particularly good choice for cost-effectively producing large-format models from sand cores for prototyping. The VX2000 can also be used to economically manufacture small-series components. The machine is fast and easy to operate. The build space measures up to 2,000 x 1,000 x 1,000 mm. The VX2000's print head system can achieve a resolution of up to 300 dpi. A layer applied in one cycle is 300 µm thick.

Request for a quote

Germany

Verified by Europages

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Request for a quote

Germany

Verified by Europages

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Request for a quote

Germany

Verified by Europages

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Request for a quote

Germany

Verified by Europages

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Request for a quote

Germany

Verified by Europages

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Request for a quote

Germany

Verified by Europages

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Request for a quote

Germany

Verified by Europages

The VX500 is a 3D printer for industrial applications that has been tried and tested many times over in practice. These machines can be found wherever there is a demand for the straightforward production of prototypes and models. Despite their compact dimensions, they captivate with the features of a high-performance printer, such as multi-jet print heads, integrated material handling and job boxes. The machine is very fast, easy to operate and permits cost-effective production of both individual parts and small series alike. Plastic can be used as the particulate material. The machine's build space measures 500 x 400 x 300 mm. The VX500's print head system can achieve a resolution of up to 600 dpi. The thickness of a layer applied in one cycle is 150 µm. In addition, the VX500 concept is resource-friendly: In plastic processes, the unprinted particulate material is recyclable.

Request for a quote

Germany

Verified by Europages

The VX4000 is the world's biggest industrial 3D printing system for sand molds. It has a cohesive build space measuring 4,000 x 2,000 x 1,000 mm (LxWxH). This machine can be used to economically produce very large individual molds, a great many small series components or a combination of the two. With its uniquely large volume, the VX4000 maximizes productivity and flexibility. The unique and patented layering process was specially adapted for this printer. Instead of lowering the building platform during the printing process, the print head and coater are raised with each layer. As a result, the machine can bear the enormous weight of the building platform, which can be quickly exchanged via a rail—making it possible to print nearly continuously. Sand can be used as the particulate material. The VX4000's print head system can achieve a resolution of up to 300 dpi. A layer applied in one cycle is 300 µm thick.

Request for a quote

Germany

Verified by Europages

Our international bestseller: the VX1000 is a universal 3D printer for industrial applications. The machine is fast, easy to operate and enables you to cost-effectively produce medium-sized molds, cores and models for making prototypes. The VX1000 is also suitable for producing small series. Plastic and sand can be used as the particulate material. The piezo print head system of the VX1000 achieves a resolution of up to 600 dpi. The machine's build space measures 1,000 x 600 x 500 mm. The thickness of a layer applied in one cycle is 150 µm for plastic and 300 µm for sand. In addition, the VX1000 concept is environmentally friendly: In plastic processes, the unprinted particulate material is recyclable.

Request for a quote

Germany

Verified by Europages

Based on your ideas and in close collaboration with your specialists, PRUFREX takes part in the development of your new products. In the shortest possible time, we are able to supply you with individually produced prototypes and functional models. We use 3D printing technologies to efficiently produce mechanically functional device models. We know how important functionally correct sample products are in the early phases of your product, as are impressions of the look and feel of the device as a whole.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

Your relaible partner from China for injection molds & moulding parts with high- quality and cost-effective solutions. ISO 9001:2015 & IATF 16949 accredited

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

If you need 20, 50 or 100 plastic parts within days, Urethane Casting process at RPWORLD is right for you. RPWORLD Urethane Casting process is designed for high quality rapid prototypes and low-volume production parts. - Complex-geometries The complex geometries parts like undercut are available to meet your most critical requirements. - A wide variety of materials With various types of polyurethane that simulate performance of PMMA, PC, PP, soft rubber and more, we provide custom parts that meet a wide variety of applications. - Overmolding We also provide liquid silicone rubber molding, overmolding and insert molding, and you can expect your custom parts in as fast as 7 days. - Solid color, textures and transparency available The high-quality solid color, textures and transparent are available, without shrinkage and sink marks. Industries Applied: - Medical Device Manufacturing - Automotive - Scientific Instrument - Mechanical Engineering - Robotic - Design

Request for a quote

China

Verified by Europages

Newest Design DC Comic Batman Hot selling custom Action movie resin figure for sale

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free