Rubber bearings - Import export

Plastic Pulley Bearing Nylon Bearing

Elastomeric bearings reinforced internally with one or more steel plates, chemically bonded during vulcanisation are called laminatid elastomeric bearings. Elastomeric bearings permit a smooth and uniform transfer of loads from beams to substructure and also allow beam rotations at the point of support due to deflection of beam under loading. They further allow lateral and longitudinal movement of beams caused by thermal forces. Elastomeric bearings have no moving parts and thermal expansion and contractions are supported by shear capacity of elastomers. There is no sliding motion between bearing and beam or between bearing and abutment.

MODEL RG - FREE ROLLER-COATED DIAMETER 32 MM - PITCH 40 MM FOR SMALL AND FRAGILE PACKAGES Free rollers conveyors that consist of sturdy painted steel 2 mm thick, 50x25 mm tubular support, legs fixable on floor and adjustable in height, 32 mm diameter steel rollers coated with rubber, rotating on ball bearings (8mm axle). The versions with a width of 1000 mm consist of a 2-roller axis with central support. This solution allows to have a greater flow rate that reaches up to 90 Kg/m.

For the special requirements of your belt conveyor system, we manufacture for you idler pulleys, carrying idlers, throbbing drums, lift pulleys with or without internally located cone. With diameters up to max. 1,000 mm and lengths up to max. 4,500 mm, these are suitable for all types of belt conveyor system. All pulleys are turned cylindrically or spherically. The axle connections can be delivered in alternative designs with internal bearings, welded, with wedged connections or with clamping set shaft connections. Special designs such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be delivered upon request.

For the special requirements of your belt conveyor system, we manufacture for you drive pulleys, carrying idlers, throbbing drums, lift pulleys with or without internally located cone. With diameters up to max. 1,000 mm and lengths up to max. 4,500 mm, these are suitable for all types of belt conveyor system. All pulleys are turned cylindrically or spherically. The axle connections can be delivered in alternative designs with internal bearings, welded, with wedged connections or with clamping set shaft connections. Special designs such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be delivered upon request.

The reinforced universal adapter with brass bushings is intended for converting a hand auger into a power auger, using a cordless screwdriver or a motor during the ice drilling. With a drill screwdriver and the universal adapter, ice is drilled easily, allowing spending a minimum effort and time on drilling. The brass bushings play the role of plain bearings. Compared to rolling bearings, they have a longer service life, are more wearresistant and also have increased anticorrosion properties. They withstand all the frictional forces and protect the adapter from wear, extending the product life under high loads. They also protect the adapter from moisture. The improved twostage design of the adapter output shaft has 19 mm and 22 mm diameters. Suitable for TORNADO, BURAN ice augers with the bit directly or with an extension; MOTOSHTORM bits with a bit directly or with an extension; ICEBERG ice augers with the bit directly or with an extension * The extensions are sold separately

Elastomeric bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation. However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement. To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.

If, on the contrary, a fixed bearing is desired, guides are added parallel to both axes, so that movement is completely blocked. Each elemental layer, subject to stresses and movements, deflects

These isolators are similar to the previous but with the exception that the dissipation of energy is obtained also through the use of one or more lead cores. Lead (used here at a level of gg.go% purity) has the property of undergoing plastic deformation as it dissipate energy and then re-crystallizing after a cycle of plastic deformation. Because of this, it is able to sustain an unlimited number of hysteresis loops.

High damping rubber bearing (HDRB) were developed in 1985 by Professor James Kelly at the University of California at Berkeley. Ozdekan was the first company which manufactured and applied this technology in Turkey, using it in 2014 for the AFAD building in Ankara, Turkey. The isolating system was designed with consultation by engineers. Ozdekan was the first company in Turkey which developed the lead rubber bearings with consultation of university researchers. The HDRB isolators are composed of a series of vulcanized rubber layers separated by reinforcing steel plates, thus providing a device capable of supporting high vertical loads with minimal compression (elevated vertical stiffness) and allowing high horizontal displacements with relatively small reactions (low horizontal stiffness). www.ozdekan.com

The behavior of the LDRB isolators is highly linear in shear stiffness and the damping ratio is 2 - 3% of critical damping. There is no creep in the material and the stability of the modulus of elasticity is very good. Advantages of LRDB insulators; they can be modulated in a simpleway and they are less affected by the factors that have mechanical behaviors. These insulators may need additional damping elements.

The bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation. However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement. To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.

Smooth running polyurethane castor with polyurethane wheel - polypropylene wheel body with ball bearing - grey thermoplastic rubber tread, approx. 85° shore A - with thread guards to protect the ball bearing from dust and dirt Our apparatus castors are ideal for areas demanding low installation heights. Their slim design and high-grade materials help them to meet the demanding requirements that manufacturers have for shop equipment, medical equipment, display stands, office and household furniture usage. There are numerous mounting methods available so that these castors can be attached to a wide variety of equipment. Thermoplastic (TPE) has a higher load capacity than rubber. These grey tires minimize the impact on your floors, providing a comfortable ride without leaving traces. Some contact discoloration may result from the oil-bearing material when the tires are left motionless for longer periods on sensitive floors.

Standard castor with thermoplastic rubber wheel - polypropylene wheel body with ball bearing - grey thermoplastic rubber tread, approx. 85° shore A - with thread guards to protect the ball bearing from dust and dirt - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. Thermoplastic (TPE) has a higher load capacity than rubber. These grey tires minimize the impact on your fl oors, providing a comfortable ride without leaving traces. Some contact discoloration may result from the oil-bearing material when the tires are left motionless for longer periods on sensitive floors.

BAF IPT-25 series products are produced from special PU rubber. These bearings are used as an antivibration product for mechanical machines for different types of machines. Every machine would be calculated and evaluated to select wright product with wright dimensions and wright application designs. The height of antivibration pad material is 25mm. Deflection dimensions and natural frequence values may be change according to the model of pad.

We can design floating floors in all kind of projects, especially for mechanical floors. BAF VIBRAFOAM BEARING series products are produced from special PU rubber or recycled rubber. These bearings are used as an antivibration product for mechanical machines and also floating floor applications for different places. Every machine or floating floor area would be calculated and evaluated to select right product with right dimensions and right application designs.

The professionalism of Officine Conterno does not end with the design and construction of machines and plants for aggregate and waste processing, but also extends to after-sales. For all machinery maintenance and repair needs, Conterno provides an efficient technical assistance service, which is able to provide for the rapid and complete recovery of your plant at both structural and functional level. We are also able to provide replacement parts for all types of aggregate processing machines, all of which are certified and guaranteed. The following is a list of the main spare parts supplied by the company, including for machines of the leading Italian and foreign manufacturers: • Jaws • Armour for mills and crushers • Hammers for mills and crushers • Steel meshes • Polyurethane meshes • Rubber meshes • Bearings for screens • Rubber mats • Scrapers • Rollers • Drums • Gearboxes for belts ... and many other mechanical parts for all types of machine.

LRB isolators are elastomeric isolators with a cylindrical-shaped core of lead. The plasticization of lead permits to obtain an equivalent viscous damping coefficient up to approximately 30%. The constitutive bond of LRB isolators is bilinear; for design purposes it is possible to use equivalent non-linear or linear models, according to regulatory provisions. Experimental hysteretic cycles of an LRB isolator at a 0.5 Hz frequency and cutting deformation ± 100%. Vibrating table tests on an LRB isolator at the National Technical University of Athens (Greece). LRB isolators installed in the office building "La Torre" of Ancona.