Rubber covers - Import export

The mixture is used for the manufacture of sealing products that are used in the environment of air, water, weak solutions of acids and alkalis with a volume fraction of not more than 20% (except for acetic and nitric acids)

Rubber crumb with a fraction of 2-4 mm is one of the important components necessary for the manufacture of artificial turf for sports grounds and running tracks, as well as for covering children's and playgrounds. Terms of use: • Temperature of working materials, base surface and environment from +10°С to +40°С. • The crumb rubber should be dry and should not contain rubber dust, textile cord, etc. • The temperature of the binder should range from +15°С to +25°С • The surface temperature of the base should be at least 3°C above the dew point. Use on on damp bases is prohibited; • The surface should be dust-free, degreased, cleaned of contaminants • Exposure to atmospheric precipitation is undesirable during the day after laying the coating Laying technology: The crumb can be used both at manual laying of coverings, and when using automatic stackers.

Rubber crumb with a fraction of 1-3 mm is one of the important components necessary for the manufacture of artificial turf for sports grounds and running tracks, as well as for covering children's and playgrounds. Terms of use: • Temperature of working materials, base surface and environment from +10°С to +40°С. • The crumb rubber should be dry and should not contain rubber dust, textile cord, etc. • The temperature of the binder should range from +15°С to +25°С • The surface temperature of the base should be at least 3°C above the dew point. Use on on damp bases is prohibited; • The surface should be dust-free, degreased, cleaned of contaminants • Exposure to atmospheric precipitation is undesirable during the day after laying the coating Laying technology: The crumb can be used both at manual laying of coverings, and when using automatic stackers.

Rubber speed bump is a product manufactured by our company for many years. As a manufacturer, we understand the full degree of responsibility, and offer balanced and thoughtful solutions to ensure road safety. Thanks to many years of experience, we have managed to develop a high-quality product with high performance properties. Our products are made from a wear-resistant rubber compound used in the tire industry, which guarantees a long service life. Leading companies in the field of road maintenance and improvement trust the quality of our products. IDN-500 - end - this is an end element for a speed bump with a width of 500 mm. It is attached to anchor bolts. On top, it has a kind of spherical "spikes" for better adhesion of the car wheel.

Rubber speed bump is a product manufactured by our company for many years. As a manufacturer, we understand the full degree of responsibility, and offer balanced and thoughtful solutions to ensure road safety. Thanks to many years of experience, we have managed to develop a high-quality product with high performance properties. Our products are made from a wear-resistant rubber compound used in the tire industry, which guarantees a long service life. Leading companies in the field of road maintenance and improvement trust the quality of our products. IDN-500 has 6 holes reinforced with washers for mounting. The road roughness is set using anchor bolts with a diameter of 10 mm.

It is manufactured with the best combination of rubber and latex suitable for animals. Its resistance to ultraviolet rays, acid and weather conditions have increased. Surface texture and pattern provide maximum slip resistance. The detachable top layer(cover) allows easy changing the sponge in its.1.quality rubber with fabric court and latex ensures durability, long term use.

F.E.B.A. Laminating System is suitable for laminating, slitting and rewinding heat activated or cold bond adhesive products to fabrics, foam/rubber, soft foam, cork, felt and similar materials. Standard and special machines available to suit the customers specific converting application. UNWIND UNIT The unwind unit is composed of one station for the axial unwinding of the master logs. Manual web guide left and right. One 3" removable pneumatic shaft and brake. DRAWING UNITS The first drawing unit is composed of two large diameter siliconized rubber covered rolls; suitable for the unwinding of high and low thickness foam rolls. The second drawing unit is composed of two large diameter siliconized rubber covered rolls and will be equipped with a separate brake and clutch to be used when laminating very thin elastic materials or slitting narrow widths. UPPER UNWIND The upper unwind is to keep the single sided tape to be transferred. Manual web guide left & right.

It collects the flour from all exits of the sieve and delivers it to the flour container via pneumatics. Flour inlets are made with separate flour inlet valves. The valves lower the incoming flour into the spiral part. From here, it is directed to the outlet section via a spiral. Since the flour is covered with hair on the spiral, dust formation is prevented. There are ventilation holes at a certain point in this closed sheet metal. The spiral legs are made of rectangular profile. The helix of the gearmotor is located on the side of the outer body and is fixed to this side with the motor stand. There are rubber inspection covers on each flour flap.

Safety anti-slip shoe cover Composition: Rubber and aluminum / titanium protective toe cap Professional use: Against impacts and toe crush injuries Aluminum / titanium toe cap : Ultra light! Comfortable velcro strap: 3 sizes to cover 34-50 Color coding for size tracking Fits all shoes (even high heels) Reusable Tiger-grip ® non-slip sole with self-cleaning studs

Rubber cover Blank cover

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread.

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a central internal thread.

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread.

NSPV Dust cap for solar connectors L03002-001/002 types Features: EPDM insulation material; Flame class for UL94-V0; Used to protect electrical system from dust during panel disconnect; Fits for MC4 connectors.

Short description: Rubber covered multipurpose hose Flat hose for the delivery of liquid media - as well as hot water and compressed air. Hardwearing and abrasion resistant, robust and long-lasting. Resistance to oil, petrol and chemicals. Lightweight and very flexible compared to mandril built hoses.

Belt conveyors used for handling bulk solids utilize rubber-covered belts, where the inner carcass of the belt provides the necessary strength to pull and support the conveyed load. The carcass is shielded from damage by layers of rubber, which may vary in thickness depending on the specific application. Belt conveyors exhibit the capability to transport materials across a broad range of rates, spanning from just a few kilograms per minute to several thousand metric tons per hour. ndard troughing angles are commonly set at 0°, 20°, 35°, and 45°. The angle of surcharge is a material-specific property and can be compared to the dynamic angle of repose. The power requirements for belt conveyors hinge on various variables, including the conveyor’s profile, the type of drive-pulley arrangement, belt tensions, belt speed, and idler spacing.

Rollers with a diameter of less than 75 mm are called contact rollers. They are equipped with a metal core flush on both sides and either covered with para rubber or Vulkollan®. The hardness of the coating is usually approx. 60º Shore, but other hardnesses are also possible. The coating of the contact rollers can, for example, be provided with grooves on request. Advantages Advantages of contact rollers FAPI-PA that have these coatings are: Wear resistance Oil resistance Fat resistance Emulsion resistance Ball bearings can also be easily integrated into the metal core from a roll width of 20 mm. Due to these outstanding flexible properties, Picard’s FAPI-PA contact rollers have proven themselves on the market for decades. Vulkollan® = registered trademark of the Covestro Group We will be happy to advise you in order to find a suitable contact role for you.

Mobile play table equipped with trays and a rubber mat covering the top. Made from 18mm laminated board in a maple color. The table's wheels are noiseless, making it very discreet. Dimensions: 104 x 104 x 45 cm

Chainlink Fence & Gates Dilation Profiles Gypsyum Board & Access panels Rockwool Plywood Suspended Ceiling Plywood Marbles, Granite & Natural Stones Marble Anchorage System Raised Floor Carpet Vinyl Coverings Epdm & Rubber Flooring Acoustic Wall Cladding Epdm & Rubber Flooring Ceramic Tiles Door Systems Overhead Cranes Bird Net system

The disadvantage of traditional textile covered rollers is that they do not assure uniform inking jobs at high printing speeds. Hannecard has developed a solid alternative: DoseRight, a laser-engraved 60 Shore A rubber roll covering. Different laser engraved patterns (squared, pyramidal, honeycomb, scattered, etc.) are available, in function of inking type and application. Laser engraved inking rollers assure a uniform and correct inking of the printing roll, avoid ghost image appearance and reduce the ink spillage. The advantages of DoseRight include: Inking rollers No cell filling No lines No ghost image

Hannecard provides over a thousand custom-made roller covering solutions, from rubber and polyurethane to composite and spray coating. To improve the lifespan and performance of the roller coverings, we are constantly developing new compound formulations.

To assure non-stick, non-crushing and non-marking for fine media (low density paper, thin film and flexible packaging) and ‘correcting’ characteristics for the contacting web, Hannecard has developed MicroGraf, a micro-cellular foam rubber for the covering of the paster rollers for the splices. MicroGraf is soft and assures the desired constant elasticity. This quality allows for planar corrections and the elimination of air pockets in the spliced web reels. As a variant, we can extend the MicroGraf paster roller covering in a double layered version called MicroGraf+. In this case, the top layer is a compact harder rubber, which can be finished helicoidally or with other special types of grooves, according to the web medium. For rougher media like Kraft paper you can rely on our low-hardness polyurethane series Splice-O-Graf, that comes in hardnesses of 22 or 30 Shore A, and which combines a high elasticity with increased mechanical and dynamical properties.

-Material :Stainless steel + Rubber -Neck length:15~40mm --Loop size:16mm -Style:England -Handcraft:Welding -Finish:Polishing -Edge:Round -can be customized -Lead time:20-35days

-Material :Stainless steel + Rubber -Neck length: *15, 20, 25, 30, 40mm(30053MR Men) *15, 20, 25, 30, 35mm(30053LR Women) -Style:European -Handcraft:Welding -Finish:Polishing -Edge:Round -can be customized -Lead time:20-35days

-Material :Stainless steel + Rubber -Neck length:15 ~ 40 mm for men -Style:England style -Handcraft:Welding -Finish:Polishing -Edge:Round -can be customized -Lead time:20-35days

-Material :Stainless steel + Rubber -Neck length : *15 ~ 40 mm for men *15 ~ 35 mm for women -Style:England style -Handcraft:Welding -Finish:Polishing -Edge:Round -can be customized -Lead time:20-35days