Sewage pumps - Import export

WQ submersible sewage pump is used in the discharge of seriously polluted industrial and commercial wastewater, sewage station in residential area, drainage system of urban sewage treatment plant, drainage station of civil air defense system, water supply device of waterworks, sewage discharge of hospitals and hotels, municipal engineering construction sites, exploration, mine auxiliary machinery, rural biogas digester, farmland irrigation and other industries, as well as sewage with conveyor belt particles. It can also be used for clean water and corrosive media.

Closed pneumatic-mechanical switching system The sewage-resistant pressure bellows and the end membrane are connected via a pneumatic line routed in a protective tube. There is a plastic housing on the collecting tank of the sewage pumping station which contains 4 easily accessible micro-switches In addition, there is a manometer for continual filling level display located in the housing

Pressure sensor for analogue filling level measurement Especially suitable for STRATE sewage pumping stations for municipal applications Supply voltage 24 V DC Output of an analogue measuring signal 4 – 20 mA Pressure ranges depending on tank height 0 – 200 or 0 – 400 mbar Safe at several times over-pressure Explosion protection according to ATEX

The STRATE AWALIFT 80 is the system preferred for draining single- and two-family homes where the drainpipe is below the backwater level (acc. to DIN 1986-100) and the houses cannot be drained using natural gradient. DIN EN 12056-4 specifies the backwater level here as being the road surface of the connection point to the public sewage system. The AWALIFT 80 was specially developed as a small system for building services engineering (max. 12 residents). This means that for the first time, demanding users now have a sewage pumping station available in patented and tried-and-trusted separator technology, which employs polymer components throughout. And the separator system effectively prevents pump blockage. Area of use Single-family homes (e.g. toilet, shower, bath, sink, washing machine etc.) Basement flats Party rooms in the basement Two-family homes etc. Product features Sewage Pumping Station AWALIFT 80 after DIN EN 12056-4 Suitable for faecal wastewater

Redundant twin measuring system where there is a requirement for increased operational safety for sewage pumping stations (e.g. main pumping station) for municipal applications. Product features The twin measuring system HWAS-BN uses two mutually independent measuring systems which work in different ways. The analogue sensor HWAS for integration in the pump control unit is combined with the pneumatic-mechanical contact sensor system MB. If one of the two measuring systems fails, emergency control is automatically triggered by the other measuring system.

This sewage pumping system can be used for districts with up to 3700 residents and it offers a discharge head of up to 80 mWS. The expanded version, the AWALIFT 3/2x2, even offers a discharge head of up to 120 mWS. Accessories, such as a smart pump controller, a basement drainage pump, pipelines and a variety of flanges within a single building, and much more are available for purchase on request. Draining small towns with up to about 3700 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 125 Two pressure pipe gate valves DN 125

The AWALIFT 1/2 is used primarily in municipal applications for draining large properties. It is a fully automated, floodable sewage pumping system with a proven separator system for up to 750 EW. Alternating two pumps provides a high level of operational reliability. There is no need to provide reserve pumps. This system also has a gas and odor-tight tank, the surface of which is coated with high-quality corrosion protection. •Larger buildings, industrial companies, individual streets •Facilities that cannot be drained using natural gradient •As protection from backwater damage •Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with two separator systems Two rotary pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement LGA certified according to DIN EN 12050-1 /. -4

STRATE AWALIFTSCHACHT pre-fabricated shafts are used in private, industrial and municipal areas where the installation of sewage pumping stations within existing or planned buildings is not possible. The different design sizes of the pre-fabricated STRATE AWALIFT shafts allow the optimum size to be assigned to every individual AWALIFT pumping station. The possible installation of basement draining pumps in pump sumps is taken into consideration in the shaft dimensions. One-piece compound structure made of glass fibre reinforced plastic (GRP) from a shaft pipe diameter of 1000 mm to 2900 mm, cover and base plate made of reinforced concrete. Absolute water-tightness provides for excellent suitability for further purposes e.g. as an inspection, cleaning or valve shaft. Meets all the requirements of the ATV “Sewage” regulations, which means the pre-fabricated STRATE AWALIFTSCHACHT complies in production and scope of supply completely

2DFmaster AWAcontrol control system for STRATE sewage pumping stations with two pumps each and an installed overall motor rating of 0.75 kW to 75 kW each. Particularly suitable for building services engineering and municipal applications (twin systems), offers outstanding ease of use and functionality of the AWAmaster technology also for pumping capacities over 4 kW. LCD plain text display Thermal and electrical motor monitoring Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free All settings and fault messages retained after power failure Operating hours counter High resistance to interference Simple operation Level recorded either by internal pressure transducer, external 4 – 20 mA probe or float switch

Compact control systems with micro-processor technology for controlling STRATE sewage pumping stations with two pumps each and an installed motor rating of up to 5,5 kW per pump. Particularly suitable for building services engineering (twin systems) and do not require a separate control cabinet. Compact control system AWAmaster 2 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole Parallel operation of both pumps to cope with increased sewage volume (e.g. during heavy rain) LCD plain text display Thermal and electrical monitoring of the motors Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free

The compact control system with micro-processor technology for controlling STRATE sewage pumping stations with one pump and an installed motor rating of up to 5,5 kW. Particularly suitable for building services engineering (single systems) and do not require a separate control cabinet. Compact control system AWAmaster 1 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole LCD plain text display Thermal and electrical monitoring of the motor Manual – 0 – Automatic function Pump switch-off through time or switch-off point Acknowledgement button Operating hours counter Ammeter Electronic monitoring of the motor current Forced pump switch-on Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Flood alarm potential-free All settings and fault messages retained after power failure (battery back-up not required) Reserve inputs for float switch, telecontrol module

WQ submersible sewage pump is used in the discharge of seriously polluted industrial and commercial wastewater, sewage station in residential area, drainage system of urban sewage treatment plant, drainage station of civil air defense system, water supply device of waterworks, sewage discharge of hospitals and hotels, municipal engineering construction sites, exploration, mine auxiliary machinery, rural biogas digester, farmland irrigation and other industries, as well as sewage with conveyor belt particles. It can also be used for clean water and corrosive media.

Key data: Sewage Pumps VAG, rubber mounted with mixing nozzle Suitable as waste water lifting system For pit depths up to approx. 4 m Three-phased motor 2.2-3 kW with switch and 16 A CEE device plug Outputs up to max. 1,000 l/min. The Eisele VAG vertical waste water and slurry pump with mixer cap is characterised by its robustness, that is maintenance-free and its operational safety. Can be used in cellar, collection and sedimentation chambers, in combination with a float switch it protects against flooding and has an output up to 1,000 l/min.

The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. More detailed key data here: Dry self priming - dry-running safe - sucks without auxiliary fluids Sealing of the shaft using highly wear resisting mechanical seal Blockage-free due to open impellers - non-sensitive for the use on construction sites, in the municipal and industrial sectors Mobile or on carriages with three-phased motors of 3.0 / 5.5 / 11.0 kW With diesel engines 3.0 / 6.5 / 12.5 / 22.0 kW output up to 234 m³/h For PTO-drives 15 - 40 kW Output up to 360 m³/h The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. Areas of application are, next to industrial and handicraft businesses, also in ship construction and for emergency services. They are suitable for draining ponds, shafts and construction pits as well as for ground water lowerings, or for pumping waste water.

The ORCUT TMS, TES, ES and KM grinder pumps are manufactured by ORPU Pumpenfabrik GmbH, an oddesse subsidiary in Oranienburg. These pumps are characterised by a tried-and-tested, effective multiple-grinder system and are operated with motors of efficiency class IE2. ADVANTAGES - Available in standard and explosion-proof versions - Blockage-free operation, either through the use of a patented cutting system or by ensuring the passage of large particles - Stationary or mobile use - Wet or dry installation - DIN flange of sizes DN 32 through DN 150 for PN 6 and PN 10 can be used - Spiral hose can be connected - Comprehensive accessories - Highly efficient - Cost-efficient installation - High operating safety - Long service life - Effluent containing fibres and solids, faeces - Delivered medium temperatures up to 40 °C - Comprehensive service network PERFORMANCE RANGE Delivery volume Q = … 520 m³/h Delivery height H = … 60 m Rated wattage P = … 26 kW