Slide production - Import export

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

Our cross roller guide rails are freely interchangeable standard elements. Our guide rails allow the assembly of extremely rigid and precise linear guides without any play. Benefits Able to carry high loads running extremely smooth require little space long serviceable life Mounting instructions: When mounting the guide rails make sure the bearing surfaces have been machined in a parallel manner and are to the angle. The tolerances of the bearing and mounting surfaces shall conform to the process tolerances of the guide rails (standard quality). The prestress applied depends on the respective mounting conditions, on the rigidity of the assembled slide structure respectively. We recommend to apply a prestress equivalent to a value between 5 and 20 % of the maximum admissible load. However, the load carrying ability of the overall guide rail structure thus realized will, at any case, be reduced by the prestress applied.

The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RK line is equipped with a cross type handle and, from size 300 on, with a hand wheel. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The slide MediGliss is a KUNESA invention and development for the vertical transport of a wide variety of products in different in- dustries. The 180° spirally winding element made of polyurethane hard-foam can be nearly endlessly assembled to the desired height using a plug-in connection. The ma- terial is light, stable and also sound-absorb- ing; and for that certain something, we can lacquer your MediGliss as desired.

Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The SH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 400 can, on option, also be furnished with a 0.01 mm scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The SK line is equipped with a cross type crank handle and, from size 300 on, with a hand wheel. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The SM line is equipped with a knurled micrometer knob with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

The SS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine.

The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides. Even under high loads they assure smooth running operation, free from play and guarantee an extremely precise lengthwise motion. As compared to guide rails (dovetail type) they enable exact and easy displacement of parts, free from play.

The SE line is equipped with end plates and suits for attachment of stops, micrometers, cylinders etc. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

The V shape of the shaft support is the result of purposeful internal development work at Föhrenbach. The most important advantage comes from having the greatest possible distance between the shafts and above all in the lay-out of the four ball-bearing housings whose loadbearing rows of balls are located underneath the shaft. The unitized, modular type like design realized with these devices enables to cover a wide range of application specific solutions. Manufactured in standard widths from 75 to 425 mm and in lenghts of up to 4000 mm, the products are designed to provide solutions that allow to cover almost all handling and mounting tasks that need to be met. An experience of long standing assures for competent solutions.

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

Type MR - roller bearing mounted slide /Typ MS - dovetail slides Positioning accuracy: 0,001 - 0,1 mm according to the spindle used and the feedback system Drive: Stepping or direct-current motors

The highest accuracy class “Ultra-Precision plus” impresses with an accuracy of 0.0005 mm, thus 0.5 µm. Due to the fact that the control unit of the Föhrenbach slides is compatible with the interfaces of almost all measuring systems, this extraordinary repeatability does not depend on a particular system or a specific provider. Föhrenbach profiled guide slides with integrated linear motor are available in the series PFL (with bellows covers) and PCL (with sheet metal covers). For both series three sizes are available. We developed three resp. two linear motors of different force.

This guiding system makes it possible to accurately position your products. Furthermore, you can fix it exactly at the desired place. The innovation lies in the backlash-free clamping, horizontal and vertical side misalignment ≤ 3 μm. Useful advantages: compact sizes and the possibility of adjusting and locking the guide by a hex screwdriver. Clamps permit a fast combination to 2 axis systems and/or 3 axis systems or the fitting of axis systems on a base plate. Features Dovetail slides made of Aluminium, natural anodized 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm Backlash-free clamping Compact sizes Adjustment with knurled micrometer knob (standard) or hex screwdriver High load ratings Guides without play High damping Scale with knurled micrometer knob Mounting kit (clamps) Easy and quick to combine to 2 axis systems and/or 3 axis systems Optional position readout (starting from size 30 mm)

Light Rail product line includes full or partial extension lightweight telescopic guides. Optional locking mechanism for open or closed positions Various designs, maximum stroke 1,100mm Telescopic extraction up to 105% of the closed slide length The Light Rail product family includes lightweight telescopic rails to be used in environments allowing only reduced weight components. Smooth and quiet operation is ensured even with heavy loads. Elastic shock absorption avoids permanent distortion. The self-cleaning raceways mounted on the Light Rail telescopic rails ensure safe operation and less frequent maintenance. Main fields of application for Light Rail extractable telescopic rails: Food & Beverage Building & Furniture

SCHOCK has been a successful innovator and manufacturer of ball bearing telescopic rails and linear slide systems for decades. Our products impress with their precision, high load ratings and long service life.

Product information "Slide closure bags from 60-75µ" Sliding closure bags - Request bags with sliding closure Sliding closure bags from 60-75my in various dimensions LDPE, transparent with practical sliding closure Price per piece Would you like to customize your slide lock bags? You have the option of having your slide lock bags printed with up to six colours. Motifs that are often requested are, for example, company logos and slogans. You also have the option of having the slide-lock bags colored completely (approx. 100 foil colors according to Schulmann). Individual design is possible and depends on the size, thickness and design of the bags). When you buy your ziplock bags from Lacers in Berlin, you are opting for very good quality and all-round service. Are you interested or have questions about our products? Just send us an email or just give us a call: 030/ 405 719 40. We would be happy to advise you.

The magnetic door stay is intended for fitting/attachment in/to door leaves. When fitted, the magnetic door stay is hidden in the door leaf. A separate installation set (TFS26-MONT) is available. With both installation variants, the door is held at the installation point of the disc when the door leaf with integrated door stay slides over the disc. Product TFS26-HlsKs serves for side mounting of our door stay to the door leaf.

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products

Especially by our research and development work we have succeeded in creating various permanent anti-sticking coating systems. The distinctive deep-drawing properties paired with thermal resistance allow it to be used in a wide range of applications. From façade coating and device covers in industrial engineering to household products, such as sliding surfaces for shavers. There are hardly any limits for our application possibilities.