• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • grinding - steels and metals

Results for

Grinding - steels and metals - Import export

Germany

Verified by Europages

With the workshop grinding machines with built-in extraction, the working dust is effectively extracted using a protected process. The extraction unit is installed in the stand of the machine. A water filter and a plastic upstream and downstream filter (also built into the stand) filter the dust.

Request for a quote

Germany

Verified by Europages

We offer a wide range of workshop grinding machines to meet the specific needs and requirements of our customers. The development of the grinding machines is based on practical experience in the companies and is designed in combination with the latest scientific findings. In addition to the development of new grinding machines, constant improvements to existing grinding machines guarantee rational and economical use in the companies.

Request for a quote

Germany

Verified by Europages

The pipe grinding machine is suitable for grinding pipes with circular and elliptical cross-sections. The special feature is that even bent tubes can be ground on these machines. The ease of use, speed and quality of work make the pipe grinding machine an indispensable machine for all branches of industry with pipe processing.

Request for a quote

Germany

Verified by Europages

The belt grinding and polishing machines of the SMG 58 series are versatile with their different motor outputs. The SMG 58 series is a universal machine for industrial use due to its double-sided design with optional combination of belt grinding and polishing, belt grinding only or polishing only. One highlight are the two add-on motors, which can be switched off separately and drive the split spindle shafts of the machine. For each shaft, three different speeds can be preset via V-belts. It is even possible to adjust the speed steplessly with a frequency converter. Standard abrasive belts with a length of 3,500 mm and a maximum width of 100 mm can be used on the machine. The maximum dimensions of the Picard contact wheels are 450 x 100 mm with a bore of 35 mm.

Request for a quote

Germany

Verified by Europages

The belt grinding and polishing machines of the SMG 56 series are versatile with their different motor outputs. The SMG 56 series is a universal machine for industrial use due to its double-sided design with optional combination of belt grinding and polishing, belt grinding only or polishing only. Highlights are the two built-in motors, which can be switched off separately and drive the split spindle shafts of the machine. Each shaft can be preset with three different speeds via V-belts. Standard abrasive belts with a length of 3,500 mm and a maximum width of 100 mm can be used on the machine. The maximum dimensions of the Picard contact wheels are Ø 450 x 100 mm with a bore of 35 mm.

Request for a quote

Poland

Verified by Europages

The grinding services are a surface finishing process that includes every detail that requires the removal of machining allowance and obtaining large classes of surface roughness. For technological reasons and the number of requirements as to the further condition of the surface of the elements, we adjust the metal grinding process to individual customer requirements. Metal grinding is a finishing treatment involving the treatment of surfaces of various shapes with abrasive tools. Grinding allows you to remove burrs (deburring) and roughness, as well as machining allowance. This surface finishing method allows to obtain a surface with low roughness and desired shapes and dimensions with quite high accuracy. Surface grinding is one of the most common methods of surface treatment, for a wide variety of metals, including grinding steel, metal grinding bits, grinding welds, aluminum grinding and many others.

Request for a quote

Poland

Verified by Europages

We perform grinding mainly on endless belts, as well as with the use of special grinders and hand-held power tools.

Request for a quote

Poland

Verified by Europages

Grinding is a precise reduction machining done with the use of griding wheels on special machines that is centreless grinders. Ground bars are characterized by the highest quality among bright steel products and find the application in the production of the most responsible parts of the machinery. Ground bars can be processed from both half-products, drawn or peeled bars. Mechanical properties do not change during grinding.

Request for a quote

United Kingdom

The AL100u is operated with a lever. With the AL 100u you can grind material from Ø20 to Ø76.1. The cross support and the slide with rotatable clamp are infinitely adjustable. This allows all tube profiles to be grinded at any desired angle from 30° to 90°. The Al150u has a wider belt (150mm), and can grind material from Ø20 to Ø114.3, and is operated by either a lever or handwheel operation for greater precision. Both machines grind square, rectangular and round pipes with different wall thicknesses and is suitable for all common material types. Thanks to the ALMI belt adjustment system, adjusting the grinding belt is now even easier with the supplied hex wrench. The grinding belt can be tensioned quickly and changing grinding rollers can be done in just a few seconds. Fitted with a deburring table, when a pipe has been ground it can be easily deburred on the deburring table. This makes the machine truly multifunctional.

Request for a quote

United Kingdom

The new AL150HS has a belt speed of 45 m/s due to its unique transmission. When you open the rear cover, you can also use the pipe grinder as a belt sander, ideal for deburring cut profiles. The AL150HS has the option of being operated by means of two handwheels or by means of a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the slide with rotatable clamp are infinitely adjustable. This allows all pipe profiles to be ground at any desired angle from 20° to 90°. The AL150HS grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common material types. It is now even easier to adjust the grinding belt with the supplied hex wrench. The grinding belt can be quickly tensioned and grinding rollers can be changed in just a few seconds.

Request for a quote

United Kingdom

The RVD belt driven pipe notching machine achieves a superior notch finish due to the greater accuracy of the roller and belt notching method. The machine is capable of grinding square, rectangular and round pipes with different wall thicknesses and is suitable for all common material types. The grinding belt can be tensioned quickly and changing grinding rollers can be done in just a few seconds. Fitted with a deburring table, when a pipe has been ground it can be easily deburred on the deburring table. This makes the machine truly multifunctional.

Request for a quote

United Kingdom

The metal removal rate of the Kepp belt grinding machines is phenomenal. The grinding power is over fifteen times that of traditional stone grinders. These powerful machines can radius heavy plate and bar in one operation, avoiding the need to crop or burn the required profile prior to ‘dressing’. A 50mm radius in 12mm steel plate is achieved in 10seconds. They have an endless variety of applications for fabricators, blacksmiths and many others in the metalworking industry.

Request for a quote

United Kingdom

Machinable to accept required hole pattern Ground Flat Five High Accuracy Location Holes Cast Iron Sub Plate to suit rotary table or indexer. Plain to allow for machining of hole patterns and features required for special jigs or fixtures. Ground flat with Locating Holes for precise loading and quick set-up.

Request for a quote

United Kingdom

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat Five High Accuracy Location Holes Cast Iron Sub Plate to suit rotary table or indexer. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat with Locating Holes for precise loading and quick location.

Request for a quote

United Kingdom

A Chick Workholding Foundation Plate is tailored to fit the machine’s specifications. A standard grid pattern to simplify designing, cataloguing and utilisation of fixtures, providing consistency and repeatability to set-ups. Length and width tailored to the machine’s work envelope. Precision ground cast iron to 35mm thick. 50mm spaced holes, drilled and tapped, for use as both location and hold down. Sealed with chip plugs. An alpha-numeric labelling system. Minimises set up time from workholding system to system. Machine interface mounting holes, customised for each machining centre.

Request for a quote

United Kingdom

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Cast iron gridded angle plate .Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. To suit verticle or horizontal machining centre applications.

Request for a quote

United Kingdom

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Cast iron gridded angle plate .Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. To suit verticle or horizontal machining centre applications.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

United Kingdom

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Locating Holes for easy Location Cast iron fixture plate with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Two dowel holes allow for precise loading and setting up of the fixture plate.

Request for a quote

United Kingdom

Adapt standard expanding mandrels for blind holes Compatible with metric ID Xpansion clamps Milling and turning versions available Manual actuators for use with the Miteebite range of ID Xpansion clamps. These Actuators are specifically designed for gripping the ID of blind holes but may also be incorporated in many applications that require a straight draw actuated 90 degrees from the drive screw. They are capable of gripping on bores ranging from 4.1mm to 35.3mm using our standard ID clamps. Both styles of Actuators come completely assembled with the heat-treated cylinders tapped for the following clamp drive screws: M2, M4, M6, M8, M10 and M12.

Request for a quote

United Kingdom

The Chick Indexer Sub System (ISS) combines the productivity and versatility of the Multi-Lok with a 4th axis rotary table The Chick Indexer Sub System (ISS) combines the productivity and versatility of the Multi-Lok with a 4th axis rotary table thereby converting a vertical machining centre to work like a horizontal providing: Obtain the benefits of a horizontal CNC machine on a vertical CNC machine, by using CHICK’s Indexer Subsystem (ISS). Utilize the indexer you have and marry it to one of CHICK’s Multi-Loks. The ISS gives you the ability to machine on mulitple part sides with only one clamping, thereby decreasing the cycle time and increasing accuracy of your part. Obtain the benefits of a horizontal CNC machine on a vertical CNC machine, by using CHICK’s Indexer Subsystem (ISS). Utilize the indexer you have and marry it to one of CHICK’s Multi-Loks. The ISS gives you the ability to machine on mulitple part sides with only one clamping, thereby decreasing

Request for a quote

United Kingdom

Machinable to accept required hole pattern Ground Flat and Parallel Locating Holes for easy Set-Up Cast iron plain fixture plate with mounting holes. Plain to allow for the machining of hole patterns and features required for specific fixtures. Ground flat parallel and perpendicular for accuracy. Two dowel holes allow for precise loading and setting up of the fixture plate.

Request for a quote

United Kingdom

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Threaded Holes for Side-Location Cast iron gridded cube with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and setting up of the tombstone.

Request for a quote

United Kingdom

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Threaded Holes for Side-Location Cast iron gridded cube with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and setting up of the tombstone.

Request for a quote

United Kingdom

T-Slots to allow for Flexible use for Fixturing Products Ground Flat Five High Accuracy Location Holes Cast Iron Sub Plate to suit rotary table or indexer. T-Slot pattern to allow for easy flexible set-up of fixturing components. Ground flat with Locating Holes for precise loading and quick location.

Request for a quote

United Kingdom

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Threaded Holes for Side-Location X-Shape allows for more side Clearance for Machining Cast iron gridded cross profile Tooling Column with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and setting up of the tombstone.

Request for a quote

United Kingdom

Sturdy Cast Iron Design Ground Flat and Parallel Modular quick change subplate to suit the BP13 modular cube. This plate is gridded to accept standard fixturing parts./

Request for a quote

Romania

Forged balls are used in the construction industry (to prepare bricks, cement, BCA-Autoclaved aerated concrete etc.) and also in the mining industry. The balls are made of carbon steel. Available diameters: 35 mm – 40 mm – 50 mm – 60 mm Hardness range: 59 – 63 HRC Dimensional deviation: ±3 %

Request for a quote

Germany

INDIVIDUAL SOLUTIONSIf you are searching for a custom solution for your mass finishing processes, the TT...B series is the best choice. The modular system allows you to fit the individual machines with feeders, screening machines and abrasive media return transport systems as required. ELECTROMECHANICAL OR HYDRAULIC SYSTEMS AVAILABLE The work bowl can be pivoted either electromechanically (TT 25, TT 45) or hydraulically. You can also partially automate processing with the respective peripheral devices such as feeding and separating units. THE BENEFITS AT A GLANCE Individual mass finishing solution Modular system Choose from electromechanical or hydraulic system Partial automation possible

Request for a quote

Germany

CONTINUOUS TROWALIZING OF NON-SENSITIVE PARTS The AV range of continuous units allows you to continuously process large quantities, with no need to interrupt the mass finishing process to add new workpieces. Thanks to the trough-shaped work bowl, you can process small and medium non-sensitive mass-produced parts (punched parts, die-cast parts, etc.), as well as larger parts (oil tanks, cylinder head covers, etc.). THE BENEFITS AT A GLANCE Continuous workpiece processing Interruption-free workpiece loading Trough-shaped work bowl Easy to integrate in fully automated mass finishing processes Simple material handling without batch loading

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free