Warping - Import export

Warps are made on electronic sectional warping machines which allow us to make both short and long runs efficiently in both plain and multi-coloured designs. Measured length cone winding means that we can make warps with only very few cones to maximise the yields. ** Click for more **

WM300 Warping Machine The yarn warping machine is applicable to each kind of yarn. Warping can be effected on one of beams at a time special attachments guarantee a perfect uniformity of tension of all ends from the beginning to the end of the warping operation. In fact, the warping angle is held constant and the pressure between the drive roller and the beam is brought about by a air pressure between the drive roller and the beam is brought about by a air pressure system, permitting a varia... WM300 Warping Machine The yarn warping machine is applicable to each kind of yarn. Warping can be effected on one of beams at a time special attachments guarantee a perfect uniformity of tension of all ends from the beginning to the end of the warping operation.

QuellTech Solution For this purpose, QuellTech offers a perfectly tailored seam tracking solution, which is based on a QuellTech 2D-Laserline Sensor of the Q4 family. The method consists in measurement of the real position and width immediately ahead of the welding process. The laser sensor captures the real dimension of the weld bead, and the software used for this process simultaneously sends the nominal position to the robot. The robot performs a correction movement in X or Z position according to this measurement. This way not only the deviation caused by tolerances, but also the warping effect can be compensated – and the weldment takes place exactly at the required position. The QuellTech 2D-Laserline Sensor is specially prepared to the highly disturbing ambient light from the weld process. It can be cooled and protected from weld spatter, so this model proves to be particularly adequate for operation in the harsh environment of the welding process.

Particular challenges To correct the effect of the tolerances of the parts, the welding robots path in conventional applications is usually adjusted, by means of a time consuming manual correction (teaching). The warping effect caused by the thermal expansion however cannot be compensated this way. For this purpose, QuellTech offers a perfectly tailored seam tracking solution, which is based on a QuellTech 2D-Laserline Sensor of the Q4 family. The method consists in measurement of the real position and width immediately ahead of the welding process. The laser sensor captures the real dimension of the weld bead, and the software used for this process simultaneously sends the nominal position to the robot. The robot performs a correction movement in X or Z position according to this measurement. This way not only the deviation caused by tolerances, but also the warping effect can be compensated – and the weldment takes place exactly at the required position.

Multiaxials, known as NonCrimp fabrics are made by one or more layers of long structural fibers oriented along the preferred direction, held in place by a secondary nonstructural stitching thread, fleece, or binder. Quadriaxial fabric is one in which long, structural fibers is oriented in four directions, held in place by a secondary nonstructural stitching thread.

Multiaxials, known as NonCrimp fabrics are made by one or more layers of long structural fibers oriented along the preferred direction, held in place by a secondary nonstructural stitching thread, fleece, or binder. Triaxial fabric is one in which long, structural fibers are oriented in three directions, held in place by a secondary nonstructural stitching thread

Multiaxials, known as NonCrimp fabrics are made by one or more layers of long structural fibers oriented along the preferred direction, held in place by a secondary nonstructural stitching thread, fleece, or binder. Biaxial fabric is one in which long, structural fibers are oriented in two directions, held in place by a secondary nonstructural stitching thread.

The WARP CP is an inline measuring system with radar-based wall thickness sensors for detecting the various structures of a corrugated pipe. Outer and inner diameters, as well as the wall thicknesses of the bell, crest, liner, and valley can be resolved. The system is available for large, corrugated pipes with diameters from 300 mm. Since the corrugated tube has different structures, it is therefore necessary to assign the measurement data to the corresponding position on or in the tube. The WARP-CP algorithms do this automatically and prepare the data for the user in such a way that he receives different graphics and corresponding measurement data for each structure. Other advantages/features: — Non-destructive, contactless, and automated inline measurement of all relevant structures of the corrugated tube — No waste due to destructive measurement — Repair of critical thick and thin spots — Saving of material overweight in the end product

WARP 100 is an inline pipe measuring system for wall thickness and diameter measurement at up to 38 measuring points and 19 axes. More than 1100 measurements per second guarantee a gapless measurement. This is particularly important for pipes with high quality requirements, such as pressure or gas pipes. The maximum line speed for 100% coverage is up to 11.8 m/min. WARP 100 is available in three sizes and can be used for measurement in the diameter range from 25 to 630 mm. Measured variables such as wall thickness, diameter, ovality, eccentricity as well as process conditions (e.g. sagging) are precisely recorded, documented, and further used for automatic process control. Other advantages/features: — Measurement with 100% pipe coverage in diameter range from 25 to 630 mm (three sizes) — Wall thickness range from 2 up to 125 mm (depending on material) — Detection of thin sections within the tube — 100% documentation of production according to specifications

The WARP 8 is an inline pipe measuring system for wall thickness and diameter measurement at 8 points or 4 axes. It provides all important measurement data required for manual or automated process optimization and control. In addition to the short return-of-invest time, the system offers high measurement accuracy as well as process automation and documentation functions. The static sensors allow a high resolution of the measured values in the extrusion direction. Thus, process fluctuations are precisely recorded and visible, so that effects such as short-term fluctuations in output or backpressure effects during the sawing process can be detected and eliminated. Other advantages/features: — Diameter range from 60 to 1200 mm (five sizes) — Wall thickness range from 2 up to 250 mm (depending on material) — Short ROI period — Ideal for process optimization

The WARP portable is a mobile, radar-based hand-held gauge for selective wall thickness measurement, specially designed for medium and large pipe extrusion as well as for sheets. The application possibilities are very flexible, whether as a quick centering aid in the start-up process, for final production control or as a stock control device. Not only wall thicknesses at pipe ends can be measured, but also the progression inside a pipe section or a sheet. The measurement itself is performed at the push of a button. The last 500 measured values including the measuring angle on the pipe as well as the time stamp are stored. Over 400 WARP portable sold speak for themselves. Other advantages/features: — Hand-held measuring device for wall thicknesses from 2 to 110 mm (depending on material) — Measured value log including measuring position on the pipe (last 500 measured values) — Intuitive handling — Splash-proof housing (IP54)

Double sided cotton terry made with warp knitting Karl Mayer equipment Capacity - 50 tons per month. Style - any plain colour dyed Width - 150 sm Weight - 250-350 GSM MAYER ORME TEKSTIL, since 2014 Number one in Turkey to produce warp knitted terry fabric. We produce high quality warp-knitted terry fabric which is perfect for: - Bath towels, - Beach towels, - Towels for hotels, hospitals, pools and SPA salons, - Promotional towels, - Bathrobes, - Home clothes, - Soft toys, - Home slippers, - Bed covers, - Promotional terry products. We use only superior quality yarns to make our fabric soft, voluminous and antiallergenic. One or two-sided terry fabric has high water-absorbing characteristics. It is resistant to loops pull-out and can look like new even after 500 washing cycles. High quality cotton, bamboo and polyester yarns allows us to obtain the optimum ratio of the components according of the final product characteristics.

fabric composition: 80% PA 20% EA weight: 170 g/m² width: 155 cm

fabric composition: 80% PA 20% EA weight: 170 g/m² width: 155 cm

Single jersey, rib, interlock melange fabrics. Melange (or heather effect) is 2 or 3-tone effect achieved by special dyeing process on knit fabrics. We have over 50 different melange effects on knitted fabrics. Melange is often used to represent the kind of effect on fabric surface. Melange or heather effect is achieved either; – through dyed yarn effect – through dyeing technique Melange or cationic yarns are dyed to exact colour and melange effect intended during yarn texturising or spinning. Polyester DTY and FDY cationic yarns are used for polyester compositions. Polyester spun, viscose spun yarns are also employed for melange effect knit fabrics. No subsequent dyeing is needed for coloured melange yarns after knitting. Melange yarns produced in raw white form are dyed to exact pantone colour after knitting. Melange yarns (or cationic) are inherently given the melange effect intended after dyeing and finishing.

wooden stirrers for coffee 140 mm. wooden mixer for coffee eco-friendly product

We are ASLAN MAKINA , a Leading Manufacturer in the shrink packaging sector. Since its establishment in 2009, our company has been developing and manufacturing different types of SHRINK and WARP MACHINERY to be applied on a wide range of products from different Industeries such as : CARDBOARD products like PIZZABOXES, FOOD, BEVERAGE products, FURNITURE, CERAMIC, BROWN PRODUCTS, ELECTRONICS and many other applications. Our registered brand name is aslantech On a surface of 3600 m2, Our facility is located at THE Organized Industrial Zone PANCAR, IZMIR TRUKEY, and just 20 minutes distance from the International Airport Adnan Menderes. Thanks to our skillful Engineering teams and to our hard working blue collars , 100% of our production is made at our company including The Designing, Laser Cutting, Welding and programing. Our workshops are equipped with a production capacity greater Than 25 machines per month.

We are ASLAN MAKINA , a Leading Manufacturer in the shrink packaging sector. Since its establishment in 2009, our company has been developing and manufacturing different types of SHRINK and WARP MACHINERY to be applied on a wide range of products from different Industeries such as : CARDBOARD products like PIZZABOXES, FOOD, BEVERAGE products, FURNITURE, CERAMIC, BROWN PRODUCTS, ELECTRONICS and many other applications. Our registered brand name is aslantech On a surface of 3600 m2, Our facility is located at THE Organized Industrial Zone PANCAR, IZMIR TRUKEY, and just 20 minutes distance from the International Airport Adnan Menderes. Thanks to our skillful Engineering teams and to our hard working blue collars , 100% of our production is made at our company including The Designing, Laser Cutting, Welding and programing. Our workshops are equipped with a production capacity greater Than 25 machines per month.

We are ASLAN MAKINA , a Leading Manufacturer in the shrink packaging sector. Since its establishment in 2009, our company has been developing and manufacturing different types of SHRINK and WARP MACHINERY to be applied on a wide range of products from different Industeries such as : CARDBOARD products like PIZZABOXES, FOOD, BEVERAGE products, FURNITURE, CERAMIC, BROWN PRODUCTS, ELECTRONICS and many other applications. Our registered brand name is aslantech On a surface of 3600 m2, Our facility is located at THE Organized Industrial Zone PANCAR, IZMIR TRUKEY, and just 20 minutes distance from the International Airport Adnan Menderes. Thanks to our skillful Engineering teams and to our hard working blue collars , 100% of our production is made at our company including The Designing, Laser Cutting, Welding and programing. Our workshops are equipped with a production capacity greater Than 25 machines per month.

We are ASLAN MAKINA , a Leading Manufacturer in the shrink packaging sector. Since its establishment in 2009, our company has been developing and manufacturing different types of SHRINK and WARP MACHINERY to be applied on a wide range of products from different Industeries such as : CARDBOARD products like PIZZABOXES, FOOD, BEVERAGE products, FURNITURE, CERAMIC, BROWN PRODUCTS, ELECTRONICS and many other applications. Our registered brand name is aslantech On a surface of 3600 m2, Our facility is located at THE Organized Industrial Zone PANCAR, IZMIR TRUKEY, and just 20 minutes distance from the International Airport Adnan Menderes. Thanks to our skillful Engineering teams and to our hard working blue collars , 100% of our production is made at our company including The Designing, Laser Cutting, Welding and programing. Our workshops are equipped with a production capacity greater Than 25 machines per month.

We are ASLAN MAKINA , a Leading Manufacturer in the shrink packaging sector. Since its establishment in 2009, our company has been developing and manufacturing different types of SHRINK and WARP MACHINERY to be applied on a wide range of products from different Industeries such as : CARDBOARD products like PIZZABOXES, FOOD, BEVERAGE products, FURNITURE, CERAMIC, BROWN PRODUCTS, ELECTRONICS and many other applications. Our registered brand name is aslantech On a surface of 3600 m2, Our facility is located at THE Organized Industrial Zone PANCAR, IZMIR TRUKEY, and just 20 minutes distance from the International Airport Adnan Menderes. Thanks to our skillful Engineering teams and to our hard working blue collars , 100% of our production is made at our company including The Designing, Laser Cutting, Welding and programing. Our workshops are equipped with a production capacity greater Than 25 machines per month.