Spring leaves - Import export

Also we have ; PARBOLIC Z SPRING, PARBOLIC Z SPRING W/SAFETY, FLAT SPRINGS, LOWBED SPRINGS, LOWBED DOUBLE SPRING.

Convantional and Parabolic Leaf Spring for Commercial Vehicles

S-Ply® is the registered name for composite leaf springs that are manufactured by Prause Durotec. The reinforcing material has a strictly parallel-oriented, non-interlaced glass or carbon fibre structure. The fibres are neither pre-stretched nor bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure.   Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesion to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all of the benefits offered by the raw materials selected to form the composite material.   The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress.  In addition, it has good load carrying and transmissio

  S-Ply® is a glass-fibre composite material that is suitable for the highest dynamic requirements. The load carrying and supporting material is a strictly parallel-orientated, non-woven, glass- or carbon-fibre laminate (UD-prepregnated).     The glass-fibres are not stretched and not bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesive to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all the benefits offered by the raw materials selected to form the composite material.  The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has g

Substitution of steel spring by S-Ply® leaf spring   Due to their  greater spring action, steel spring packages can be replaced by fewer or even one S-Ply® leaf spring for many applications.   Example:   a) Substitution   b) Cost calculation   Steel leaf spring: 155 x 25 x 2 mm 1 package of 10 springs   S-Ply® leaf spring: It is essential:   with: hS-Ply = Thickness of S-Ply® spring hStahl = Thickness of steel spring nStahl = Amount of steel springs EStahl = Modulus of elasticity (here 210.000 N/mm2) ES-Ply = Modulus of elasticity of S-Ply® leaf spring (here 28.000 N/mm2)   The result is that 10 steel leaf springs with a thickness of 2 mm each can be replaced by only 1 S-Ply® leaf spring with the thickness of 8,5 mm. Steel leaf spring* 10 pieces at 1,20 € = 12,00 € Intermediate package layers 18 pieces at 0,12 € = 2,16 € Total costs 14,16 € * purchase quantity > 1000 pieces, status 2009   S-Ply® leaf spring** 1 pc. at 4,13 € = 4,13 € shim plates (if applicable) 4 pc. at 0,12 € = 0,48

The laminated epoxy-fiberglass material Scotchply™, developed and patented in 1954 by the 3M company, has been processed by Prause Durotec into high performance leaf springs since 1974. Today, using the same improved fibre reinforced composite material, Prause Durotec processes and distributes composite leaf springs under the protected and registered product name S-Ply®.

Wire forms can have a shape that is limited almost only by fantasy. Many of them have some kind of spring functionality, for example some quick fastening applications. In most products, the material is stressed in bending and they can be looked upon as leaf springs made from wire. Wire forms are manufactur

Multi-coil wave springs are made from flat-rolled spring wire that is coiled to a helical shape and the coils are at the same time given a sinus shaped wave form. The force-deflection relation is created by flattening out the wave form when the spring is compressed. The function is hence like a helically shaped leaf spring.

We have over 150 years spring manufacturing experience, and today produce the world’s largest range of coil springs for the automotive aftermarket. In addition to replacement coil springs, we also stock market leading ranges of Gas, Leaf and Sport springs.

AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item for item, with a pre-determined orientation and time. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment synchronized two-mass vibration system no influencing of the vibration characteristics through the weight of the parts being conveyed maintenance-free drive conformity with all EC Guideline which affect the drives also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages Construction and operation mode AViTEQ Parts conveyors are two-mass vibration systems, which are synchronized to be close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The arrangement of the simple leaf sprin

It is possible to have square as well as round shapes, drilled holes and slots from Ø2 – Ø30 mm, with counter bores and tapped holes. To reduce stress concentration and shearing stress when mounting, we recommend the reinforcement of the clamping areas by fixing glass reinforced laminate (GHGW) plates. GHGW-reinforcement plates can be purchased loose or attached to the leaf spring. A special two-component adhesive is applied for the bonding. Following images indicate possible spring shapes:

AViTEQ-Small part conveyor is used everywhere fine-grained bulk materials and not too unwieldy mass parts must be delivered, conveyed, dosed, added or assigned from storage tanks. AViTEQ has led the way in producing these devices and drives in Germany on a highest level standard. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment No influencing of the conveying speed with different loading of the user device (conduit, trough, rail). Conformity with all EC Guidelines which affect the drives available for explosion-endangered spaces (ATEX; 94/9/EG) available for 60 Hz power systems and other mains voltages Construction and operation mode Small-scale conveyor equipment is based on synchronized two-mass vibration systems which are tuned close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The vibration amplitude (double amplitude

Extreme temperature resistant chain and gear oil. Synthetic lubricating oil for open drives, chains and gears. It does not carbonise, embrittle, build layers or polymerise and is perfectly suitable for the lubrication of open wire ropes, guideways, leaf springs and toothed racks.

The CLA LC-01 and LC-1 are bidirectional, inductive type force sensors. The measurement system is composed of a displacement transducer which mobile core is linked to two leaf copper beryllium springs. The spring flexion measurement, which is proportional to the force to be measured, is performed by inductive sensor with carrier frequency. The measurement shaft is interchangeable, allowing the use of special shaft.

Black Prince is a tightening seal made of black polypropylene. It is classified as a tightening seal. The seal consists of a catch as well as a locking mechanism and a tail part. The locking mechanism contains a four-leaf spring steel collet, which provides reliable protection against tampering. The seal has an extended working length of 385 mm (15.16") for easy use on large and bulky objects. The lock provides reliable protection with a four-leaf collet made of spring stainless steel, where the leaves are slightly lifted upwards. When there is an attempt to pull the seal tail backward, out of the lock, the collet leaves drop down and cut the tail part off, thus rendering the product unusable. It means that you will always have visible evidence on the seal if there has been an attempt of external interference.

Junior cultivators are used after ploughing, to move the soil, with tractors up do 190 HP. If you have more powerful tractors, have a look in Gigant section. You can work just with the cultivators on two rows (we mount two leaves chisel springs 55×20+25), but the best solution is to match it with a disc section. Actually, discs give two benefits: they crumble clods and give stability to the machine. Make sure that discs section is a little smaller than the cultivator after that. This way chisel springs level the soil and leave no side pile.

With it's intense scent when you get in your car it allows you to have a pleasant journey. In addition to the prominent "Spring" scent, it leaves you pleasant feelings with its different undertones. Eliminates bad odors. It is applied by spraying with the help of a sprayer.

Gigant cultivators are used after ploughing, to move the soil, with tractors up do 350 HP. If you have less powerful tractors, have a look in Junior section. If you choose the complete solution, with disc section, you will get better results. The machine is light but stable. The cultivator on two rows has many advantages, for example, the frame has bigger spaces that avoid blockages. The double leave spring (55×25+25) has a reversible share. We suggest you to follow the coupling in the table below, and choose a disc section 0.5m smaller than the cultivator on the back, so that you will have no side piles.

T-Slot Nuts and Rhombus T-Slot Nuts for Aluminum Profiles for groove width: 5 - 6 - 6,5 - 8 - 10 - 11 - 12 different designs possible: — single, double — retractable, swiveling — with/without thread — ESD-capable different fixations possible: — spring plate — spring ball — pressure spring different materials possible: — steel, galvanized — plastic — stainless steel separate spring for slot nut as mounting and positioning aid available as accessory many different designs in lengths and widths with/without fixation in the delivery assortment individual designs on request

Up-and-over doors are the tried and trusted classics when it comes to garage doors, and are extremely popular. Comprised of a single galvanized door leaf with spring-mounted lever arms at the sides, they can be operated either manually or electrically. As the door leaf swings out during operation, appropriate space in front of the garage must be taken into consideration. Up-and-over garage doors are generally less expensive than sectional garage doors. Cost-conscious customers can benefit from outstanding value for money without having to compromise on attractive door patterns or individual design options.

Its homeland is the Mediterranean region. It is also grown a lot in the Western and Central Anatolian regions. The paint prepared with Alizarin and Parparin materials obtained from the roots of the species is known in the world as Turkish red, Rubia Tinctorum. It is known to be the first plant used in yarn dyeing. Now you can buy madder from Turkey directly. It is a plant that grows on perennial and fertile soil with rhizostome 1 to 2 meters tall. The plant, which grows in the summer, has pale yellow flowers. In winter, the flowers of the plant are poured, but in spring they reopen. Its leaves are 4 to 6 pieces, circular from the same knuckle. The most likely homeland of foot boat is Anatolia. But it seems to have spread naturally to the Caucasus, Iran, Central West Asia, and the Himalayas. The most important dye plant for red color, the root boot has been cultivated for centuries.

• Sizes: Ø 7 mm, Ø 15 mm, Ø 21 mm; • Application: Neutral and mildly aggressive liquids, gases and vapors; • direct actuated; • 2-way valves and 3-way valves, NC; Spider valves are allocated to the micro valve category (outside diameter 7 mm). The anchors installed in the micronized valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. As these valves predominantly featuring cartridge connections have an almost frictionless armature movement, they have a capacity of up to 4 billion actuations, depending upon operation mode. Spider valves may also be triggered via so-called pulse width modulation.

• Seat principle, direct actuated; • Frictionless movement Spider µProp-valves are real proportional valves, in which the armature stroke is proportionally defined by the infinitely-variable current applied. The constant ratio between armature stroke and flow rate thus allows variation of the flow rate by way of the applied current. Spider µProp-valves are like Spider on/off valves microvalves The anchors installed in the micro valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. These valves have a capacity of up to 4 billion actuations, depending upon operation mode.

A banner built onto a fibreglass frame with natural spring-like properties. Before they leave our UK factory we fold them and slip them into the zip up bag which comes with every pop up banner. When you receive them they literally spring back into shape as soon as you take the pop up banner out of the bag!

GNOM DP position sensor is designed for measuring axle and cargo load on vehicles with leaf spring suspension. GNOM DP integrates in a fleet monitoring system and transmits data as an analog signal. The tracking device converts this signal in load mass value according to the calibration table. Pressure sensor GNOM DDE is used to determine the axle load in vehicles equipped with air suspension in transport telematics systems. Pressure sensor measures the pressure in the vehicle pneumatic system and transmits data as an analog signal to telematics terminal.

FEATURES Loading Ramp: Hydraulic, pneumatic operated, or spring system Platform: Pool type, flat type, from loading Axles: BPW or BPW type Turkish brand axles with 9-12-14-16 tons capacity, drum or disc option Steering: Self-steering, Hydraulic steering option Brakes: Wabco EBS or Wabco ABS brake system Suspension: Air suspension, hydraulic, mechanical leaf spring suspension, or bogie type suspension Tires and Rims: Single or Double Tire, 385/60 R22,5 – 315/80 R22,5 – 12 R22,5 – 13 R22,5 Electrical System: Saba brand electrical system with 7 or 15 pin option King Pin: 2” or 3,5” kingpin JOST or equivalent Turkish made Landing Gear: 25-35 Tons JOST or equivalent Turkish made Painting: DYO brand with primer coating Accessories: Toolbox, firebox, spare tire carrier, water tank, load lushing rings

GENERAL BRIEF Loading Ramp: Hydraulic, pneumatic operated, or spring system Platform: Pool type, flat type, from loading Axles: BPW or BPW type Turkish brand axles with 9-12-14-16 tons capacity, drum or disc option Steering: Self-steering, Hydraulic steering option Brakes: Wabco EBS or Wabco ABS brake system Suspension: Air suspension, hydraulic, mechanical leaf spring suspension, or bogie type suspension Tires and Rims: Single or Double Tire, 385/60 R22,5 – 315/80 R22,5 – 12 R22,5 – 13 R22,5 Electrical System: Saba brand electrical system with 7 or 15 pin option King Pin: 2” or 3,5” kingpin JOST or equivalent Turkish made Landing Gear: 25-35 Tons JOST or equivalent Turkish made Painting: DYO brand with primer coating Accessories: Toolbox, firebox, spare tire carrier, water tank, load lushing r Acco

LOWBED GENERAL FEATURES FOR 3 AXLE Loading Ramp: Hydraulic, pneumatically operated, or spring system Platform: Pool type, flat type, from loading Axles: BPW or BPW type Turkish brand axles with 9-12-14-16 tons capacity, drum or disc option Steering: Self-steering axle, Hydraulic steering option Brakes: Wabco EBS or Wabco ABS brake system Suspension: Air suspension, hydraulic, mechanical leaf spring suspension, or bogie type suspension Tires and Rims: Double Tire, 315/80 R22,5 – 12 R22,5 – 13 R22,5 Electrical System: Saba brand electrical system with 7 or 15 pin option King Pin: 2” or 3,5” kingpin JOST or equivalent Turkish made Landing Gear: 25-35 Tons JOST or equivalent Turkish made Painting: DYO brand with primer coating Accessories: Toolbox, firebox, spare tire carrier, water tank, load lushing rings