Woodworking - Import export

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

AVOLA Circular saw blade HM/A/PH for cutting polystyrene and wood Special benefits of our patented development: One saw blade for two materials For polystyrene (Styrodur and styrofoam) and wood No jamming and sticking, because the newly developed openings in the master blade ensure sufficient air cooling Even without blade replacement More safety and occupational protection Faster, more effective and environmentally friendly operation

There is an angular disk frame-saw of MAA in-process. A sawing process is automated and produced by means of next equipment: •loading rack with transporter •angular disk machine-tool •conveyor for sawdust removal •operator's cabin •hydraulic flow of logs Advantages: •High productivity (15-25 m3, when shift work is 12 hours ) • imported components (Sati (Italy), Hidrocel (Turkey)) • Modular line design assumes possible modernization in the future; • High quality of the received material; • Using a hydraulic system, which allows you to: - Reduce the weight and dimensions of the equipment - The time for starting and accelerating the motor is a fraction of a second, which is unattainable for large electric motors (several kilowatts). - Frequent on-off, stop and reverse movements are not dangerous for the motor. -The law of movement of the shaft of the hydraulic motor can be easily changed by using the means of regulating the hydraulic drive.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. The Yaskawa servo motors installed on all axes bring speed and precision to the production process. Versatile application possibilities: drilling, cutting or engraving in materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. The Yaskawa servo motors installed on all axes bring speed and precision to the production process. Versatile application possibilities: drilling, cutting or engraving in materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Avola GAMA 80 V carpenter’s circular saw bench for professional applications Equipment / scope of supply- Motor rating 22 kW (P1) / 400 Vac-50 Hz star delta start gear drive - Motor speed rpm 3.000 / sawblade speed rpm 2.200 - Cutting height 90° / 310 mm – 45° / 217 mm – 30° / 149 mm - Electrical sawblade inclination 90 – 30° - Revolving table 0-270° - Machine table with lateral movement 650 mm - Automatic vertical pneumatic clamping cylinders right / left - Laser light for cross cutting - TCT-sawblade, 800 x 30 x T90 - Dust extraction spigots 160 / 160 / 80 / 80 mm - Sawblade height adjustment via mechanical stop system, with measuring scale, easy to adjust - DUO infeed / outfeed devices

LATERALLY MOVABLE UNDERTABLE CROSS-CUT SAW / RIP CUT SAW FULLY AUTOMATIC CIRCULAR SAW FOR POSITIONING AND CONTROLLING VIA TOUCHSCREEN WITH LENGTH MEASURING SYSTEM EXENSO COMFORT (PUSHER SYSTEM) Application : Length stop system (pusher operation), revolving table with lateral movement and sawblade inclination via servo - motor for positioning (rip cut, cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Equipment / scope of supply : - Motor rating 12 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - lateral movement of machine table 400 mm with pneumatic brake system - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Cutting height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT - sawblade 650 x 30 x T 54

An elegant chair suitable for a kitchen, with a rattan backrest Furnishing the place, where the family spends most of their time together, is a pleasant task if you rely on beautiful models in the catalogue of the furniture factory “Evrica”and if you follow our specialists’ advice. The interior design of this place offers maximum comfort and cosiness that’s why they recommend that you use the elegant rattan chair model. This chair model presents a high quality manufacture in the process of which modern high technologies of woodworking have been used. We maintain a proved quality standard as we produce the rattan chair model from beech, cherry tree or oak tree wood, depending on our customers’ personal requirements and preferences. Its catalogue measures are the following 960/530/600. The rattan chair’s classic construction is enriched with elegant curves and rattan backrest.

Due to the built-in ball screws, our CNC Router High-Z/T achieves an extremely precise accuracy and an almost no longer measurable backlash of about 0.01mm. In addition, high travel speeds of up to approximately 108mm per second (6500 mm per minute) can be achieved. Installation of protective housing and the suction socket is necessary for CE-compliant commissioning of our CNC machines.

The woodworking industry enables to make full use of raw materials therefore our offer includes also sawdust. Wood processing operations produce a byproduct, i.e. sawdust, which itself does not constitute waste from timber. Furthermore, it may be effectively utilised (this is important given the fact that as much as 10 % of the mass of timber subjected to processing is sawdust). Sawdust is widely used. Formerly, it was utilised as insulation material (both in industry and in individual households). Sawdust is now more frequently used as an organic fertiliser or litter. Its application enables to optimise the soil moisture and increase its vital ingredients. Sawdust can be utilised as a decorative element as well, e.g. in rusticstyle gardens.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. The Yaskawa servo motors installed on all axes bring speed and precision to the production process. Versatile application possibilities: drilling, cutting or engraving in materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

LAWECO lift platforms are mainly used for rationally stacking and destacking wood up to a stack weight of 120 tons. Additional typical applications include overcoming height differences as well as rapid raising and lowering of individual pallets. for double-sided feeding

LAWECO lift platforms are mainly used for rationally stacking and destacking wood up to a stack weight of 120 tons. Additional typical applications include overcoming height differences as well as rapid raising and lowering of individual pallets. With a hydraulically driven deposit device

The newly developed RUF Briklet press produces briquettes with a diameter of 30mm. The Briklet is the right choice, when a small briquette size is needed. Therefore they can be conveyed with an automatic feed. Furthermore, it automatically offsets varying grain sizes so that other materials apart from wood can be processed effortlessly. With wood chips, the RUF Briklet press can achieve a throughput rate of around 300 kg/h with a briquette density of ≥ 1 kg/l.

For every need a suitable press: All briquetting systems of the RUF LIGNUM series process residual wood at a constantly high level of quality and density – from dust to wood shavings and coarse chips. The remaining water content must be less than 15% in order to create briquettes with consistent quality and thickness. For every requirement the right format: The rectangular briquettes can therefore be perfectly stacked and bundled into packages . The briquette formats 150x60mm and 40x70mm are available. Optimized throughput rates with our LIGNUM series: All RUF LIGNUM models are highly energy effi cient thanks to their innovative RUF hydraulic system. The further improvement of the hydraulic system of the LIGNUM R2 and LIGNUM R4 has led to an effi ciency increase of around 25%. Briquetter for wood have depending on model & material throughput rates between 410and 1,050 kg/hr.

The RUF SZ1+ briquetting system presses loose wood chips into compact briquettes. The high pressure ensures a constant high quality and density. As an entrylevel model of our wood presses, the SZ1+ is available in a standard design with proven RUF technology for small capacities (30 – 60 kg/hour). Benefits: Compact design Low wear Plug-in ready at delivery Easy operation with touchpanel Wide spectrum of additional compressible materials (wood, paper, styrofoam, ...) Automatic feeding of briquettes to industrial combustion plants possible

Olive wood is our passion and inside our carpentry workshop, we deal mainly with the realization of furniture and objects of excellence made of 100% Made in Italy certified olive wood. We create to measure, furniture of various kinds, unique pieces that express all their naturalness in knowing how to furnish any type of environment. We also produce depending on the quantity, personalized objects really unique and useful in our daily life. Our carpentry shop and the art of our artisan are available to all those who want the realization of a custom made piece and of value for both Calabria and outside of our region.

The new generation of German Graf Equipment GmbH Gorilla pellet mills is especially designed for applications with very hard pelleting conditions in terms of raw material quality in limited working space and while keeping all production norms. The production of wood pellets is one of these applications. In fact, Gorilla is the first pellet mill designed for the biomass industry, including wood biomass, with direct drive system, without gearbox or V-belts. The new pellet mill performs a high efficiency thanks to its powerful torque motor, saving around 20% of energy, compared with the conventional drive systems. An unquestionable advantage of all Gorilla pellet mill is their modular design and a large die speed range (from 4 to 8 m/s) without loss of torque, which allows to meet even the highest technological standards of pellet production. Gorilla pellet mills assure superior finished pellet quality with a high PDI (Pellet Durability Index).

We offer high-quality woodworking. We make tabletops made of solid oak, pine, in wholesale quantities. Oiled or varnished. Thickness and dimensions to be determined.

Our company has been producing a pelleting line for pellet production from biomass. Pellet mill capacity and complete lines is 500 kg/h of wood pellets and 1000 kg/h of Biomass. Pallet lines are suitable for sawmills, furniture manufacturers, farms and others. Below you will find the layout of pellet lines, which are designed according to specific customer requirements depending on their production areas