Amplified pressure sensors - Import export

The DAIP Series incorporates a heated sensor tip, which limits the potential for sensor damage relating to the membrane, resulting from installation or removal of the pressure transmitter. Additionally, it offers the comfort of the DAI series in combination with temperature measurement, allowing for heater control. The Gneuss patented heated sensor tip allows the sensor to be easily removed from a “frozen” melt without any problems. The diaphragm is not damaged when the polymer contracts. The DAIP has revolutionized the handling of critical medias, for example PC, PMMA or ABS. Heater with 24V Patented technology Maximum reliabilty through new membrane technology G-coating to counteract adhesive materials Robust design with G-Armor flexible components Interference resistand signals over long distances 3- and 4-wire technology available With integrated amplifier 0-20 mA, 4-20 mA, or 0-10 V output

The differential pressure transmitters of the PD-39X series measure the pressure difference indirectly using two absolute pressure sensors. The dual-sensor design with numerical differential formation also outputs the line pressure values via the digital RS485 interface and guarantees a high overload resistance. The additional analog current or voltage output is primarily used to output the differential pressure range, which is freely rangeable within the line pressure range.

High-precision pressure sensors from the 8201 series provide exact measurements while exhibiting very little sensitivity to mechanical stresses. Their application therefore goes well beyond research and development laboratories. They are also outstandingly suited to industrial use in quality assurance or for measurement and control tasks in production. Their robust mechanical and electrical construction guarantees good long-term stability and high reliability, while being resistant to aggressive media – which can be measured in liquid or gaseous states. The structure of the sensors includes no mechanical moving parts, which is why they show so little sensitivity to impact and vibration. The pressure sensors can be configured with options to suit the user. Standard types are available ex-stock, and customized customer versions can also be provided. Aeras of application are: —Research and developmemt —Test rigs —Mechanical engineering —Plant control and monitoring

Model number 8201 precision pressure sensors are robust, economical, and are available in standard measuring ranges. Their good technical specification and high reliability make them optimum for measuring pressure in all fields of machine construction, process technology, as well as in measurement and control technology. The pressure transducers are easy to handle and immune to shock loads and vibrations as they are designed without moving parts. All pressure transducers without an internal amplifier have a standardized output signal of 1.0 mV/V. This enables the user to change a transducer in a measuring chain as liked without following readjustment of the electronic. Customized designs are available on request. Aeras of application are: —Hydraulic or pneumatic machines —Mechanical engineering —Plant control and monitoring The measuring element of the precision pressure transducer consists of a diaphragm.

The Suvis GmbH offers flat pressure sensors (see photograph), which we produce ourselves and which can be used for classical static pressure measurements on solid surfaces like automobile frames. The flat pressure sensors are applied especially in cases where one cannot place a borehole in the respective surface. Hence, flat pressure sensors represent “transportable” static pressure boreholes, which one can glue on the surface of the flow body. The photo shows typical flat pressure probes. Typical dimensions are 17 mm (diameter of the flat disc) and 0,5 mm as diameter of the pressure borehole. The disc consists of bronze, while the measurement tube is made of high quality steel. In order not to interfere with the flow the discs are chamfered around their periphery. When producing the flat pressure sensors for you we can take your individual design requests into account. Simply contact us for a nonbinding offer.

The sensor model 8228 with its measuring accuracy of 0.05% F.S. (for the measuring ranges ≤ 1 bar, the measuring accuracy is 0.1% F.S.) ideally suited as a reference sensor. The compact dimensions, the robust housing and the industrial-grade output signal result in a very wide range of applications. All components in contact with media are made of stainless steel. An integrated measuring amplifier converts the measuring signals directly into interference-free voltage signals or current signals that can be transmitted over long distances. With the „gage“ measurement type, the pressure measurement is carried out against the ambient pressure, the sensor has a bore that is protected against ambient influences to compensate for the ambient pressure. With the „Absolute“ measurement type, the applied pressure is measured against an enclosed vacuum; this measurement type is available from the measuring range 0 ... 250 mbar. The electrical connection is made via an M12 x 1 connector.

Situations often occur in practice in which it is necessary to place a measuring amplifier immediately in the neighborhood of the sensor in order to be able to access a standard signal there. In this way, long distances to the evaluating electronics can be covered. This task can ideally be performed by the 9236 in-line measuring amplifier. With its high degree of protection (IP67) its singlechannel version can be integrated into the application even in the tough environment outside the switch gear cabinet. — Automatic production machinery — Laboratory measurements — Integration into customer‘s circuit boards — Field measurements Features: — Operates with up to 4 measuring channels — Voltage output 0 to ± 5 V / 0 to ±10 V — Protected against reverse connection and short-circuit — Also available as circuit board without housing — Simple configuration using DIP switch — High degree of protection up to IP67

The newly developed sensor PROFIBUS module model 9221 is predestined for the integration of various analog sensor output signals into complex, net worked and peripheral automation structures. This module finds its fields of application in the industrial automation technology as well as the test rig technology based on its secure and reliable transfer mode, the fast transfer speed and its simple construction. The inputs (e.g. PLC signal gauge) and outputs in addition to the external control allow a zero compensation by trigger via proximity switch or fast alerting on passing of set point values. Industrial type connection and mounting techniques enable the user the adaption and integration in the existing mechanical and electrical environment. The excellent quality of measurement together with the high grade capture of mean values also enable the application in research and development. The use of standardized PROFIBUS protocols makes the connection an easy task for the programmer.

The TactileMat is a rigid and robust pressure sensing pad that is of the largest, high-resolution pressure mapping sensors on the market. The use of a large area sensor like the TactileMat allows you to capture dynamic pressure over a larger area without the dead zones typically associated with trying to use multiple smaller sensors side-by-side. This is one of the largest pressure mats on the market. Key Features Large pressure mapping surface area (220 mm x 450 mm) Rigid, robust, and can be built in various full scale ranges (FSR) up to 188 psi FSR Waterproof IP53+ (Can be special ordered to higher water-proofing upon request) Slim construction (7.69 mm) with a non-slip base Array Size = 44 x 90, element size = 5 mm x 5 mm

The PPS Aerostrip provides a simple and convenient replacement for traditional pressure tapping or pressure-sensitive paint. It is a low profile, rapidly deployable air pressure sensing strip for aerodynamic measurement and surface optimization for motorsport and aerospace applications. The AeroStrip consists of an extremely thin strip of sensors that can be applied, and reapplied, non-destructively to test surfaces for pressure measurement due to reusable masked adhesive backing. It has comparable accuracy to pressure tapping in subsonic flow, but with a tiny fraction of the setup time and cost. With Aerostrip, you can quickly take non-destructive outside pressure measurements from control surfaces, live or in a wind tunnel, enabling faster turnaround and optimization of aerodynamic components.

The Stretchable TactArray is a flexible pressure sensor pad engineered from a soft and conductive silver-metalized Spandex. The Stretchable TactArray can stretch up to 10% and be folded in multiple directions while still maintaining high data quality. This sensor is approximately 3-7 mm thick and is best suited for dynamic curvature applications such as seats, horseback saddles and other applications where sensor thickness is not an issue. Key Features Stretch this sensor up to 10% while maintaining accurate data Can be used on objects with dynamic, multi-directional curvature (e.g., heads, spheres, computer mouse) Ideal for applications where the sensor will be flexed or deformed through use, such as seat cushions, mattresses, or clothing Capture high quality pressure data between pressures of 5 psi to 50 psi and within temperature ranges of –20° to 50°C Comes standard with Chameleon Visualization Software, and is available in many sizes and configurations

A sensitive, waterproof capacitive tactile sensor array designed to capture instantaneous and actionable spray pattern and spray pressure data generated by sprayed fluids or gases. Capture spray distribution and impact pressure and accurately identify the location and pattern where sprayed fluid or gases land. Available in two application variants, Spray Pressure or Spray Pattern, and optimal for use in situations where spray pressures are infinitesimally small.

The Industrial TactArray is a flat sensor that can capture and map pressure distribution in even the most extreme conditions. Constructed from high-quality Kapton or Polyimide, the Industrial TactArray can pressure distribution of up to 700 psi and in temperatures between -40° C and 200° C. This system is best suited for use in applications requiring tactile sensors that can withstand extremely high temperatures and pressures—like heat presses, brake pads, and nip rollers. Key Features High-resolution sensor arrays can measure pressure distribution at levels of up to 700 psi and retain performance characteristics in temperatures between -40° C and 200° C Real-time thermal compensation ensures accurate measurements even under changing temperature conditions Ultra-thin construction, 0.3 mm thick, and high-resolution sensing elements Can accommodate moderate flexing and bending Available in multiple sizes and configurations Chameleon Visualization Software included

The Conformable TactArray is a ~1mm thick flexible sensor constructed from soft, conductive cloth and captures pressure distribution between two objects in direct physical contact. The Conformable TactArray can accommodate varying degrees of curvature and can output accurate, repeatable data even while wrapped around irregular shapes. Key Features and Benefits: Maintain high-resolution and capture quality data even around complex shapes High resolution, sensitivity, and repeatability allow for consistent capture of accurate data The sensors can capture a minimum sensing pressure of 10 Pascal Save time and improve results through repeatable accuracy and less recalibration time needed Available in a wide range of size configurations, pressure ranges, and resolutions Comes standard with the powerful Chameleon Visualization Software

The PPS TactileGloves are tactile pressure sensor gloves with embedded sensing elements throughout the palm and fingers, allowing for natural and accurate testing of pressures applied to and exerted by the hand. Nearly any hand operation can be measured accurately through the 65 individual highly sensitive sensing elements within each glove. Sensor Glove Features: Ensure a natural test environment with the only glove hand sensor on the market User friendly, comfortable to wear and no adhesives or wires to get in your way High-resolution, sensitive sensors detect even the lowest pressures (0.1oz/3g) Meant to handle the real world. It's wireless and battery powered. Delivered in pairs (Left + Right). Available glove size: small, medium, and large.

The FingerTPS is a set of wearable finger sensors that enable you to measure grip, touch, and other hand forces. A more affordable alternative to the TactileGlove, this easy-to-use system captures high-quality data in a natural and organic form-factor. **Finger selection can be customised to specification** Features: Design or research with accurate, sensitive and repeatable data even for complex finger geometry. Comfortable and minimally-intrusive system allows for full range of motion and ensures natural hand manipulation research. Plug and play—no configuration needed. Just place on the hand, calibrate the sensors and Chameleon auto-detects your hand configuration. Compact wireless Bluetooth electronics provides simple and easy to use set-up, with minimal wires. Connect two wrist assemblies at the same time for two handed operations.

The CTA TactileHead is a width adjustable pressure measurement and mapping system for quantifying pressures exerted by headphones, earmuffs, headbands, and more on various head sizes. A high-resolution Conformable TactArray sensor is molded onto the curved area around the ear of the mannequin head, while another high-resolution TactArray sensor is mounted to a flat plate on the other side of the head to provide a controlled comparison. Chameleon, our real-time visualization and acquisition software, is then used to display pressures from both sensors simultaneously and to perform real-time analysis for evaluating comfort and fit.

The DTA defines the industry standard in combination with temperature measurement. One process connection suffices to measure both values. The unit excels in its high quality workmanship and cost efficiency. Its absolute reproducibility and stable measuring values contribute to our measurement accuracies.

Pressure Transmitter with Integrated Amplifier and Integrated Temperature Measurement The DTAI first of all offers the user the comfort of operating a DAI in combination with temperature measurement. One process connection suffices in order to measure both values. These model offers mA and V output signals for further processing. The popular and most commonly used 2-wire and 4-20 mA configuration provide unequalled interference in critical environments. Liquid filled measuring system Maximum reliability through new membrane technology Standard G-coating to counteract adhesive materials Combined pressure and temperature measurement Robust design with G-Armor flexible components Applications with process medias of up to 400°C (750°F) possible Pressure ranges from 0-50 and 0-2.000 bar (0-725 to 29,000 psi) available Interference resistant signals over long distances Stable output signals

Melt Pressure Transducer with standardized output signal The DA Series melt pressure transducers are characterized by their high quality of workmanship and outstanding performance and are used in the plastic manufacturing and processing industries throughout the world. Their absolute reproducibility and stable measuring values contribute to our measurement accuracies. Application areas up to 300°C (572 °F) Pressure ranges from 0-50 and 0-2.000bar (0-725 and 29,000 psi) Liquid filled measuring system Maximum reliability through new membrane technology Standard G-coating to counteract adhesive materials 100% market compatible Mercury free version available at no additional surcharge

The DAIL fulfils the requirements of EN 1114-1 for overpressure protection of extrusion lines and offers maximum comfort of operation. The auto-zero function enables calibration directly on the device or from the observation point/controller. On the output side, the melt pressure transmitter provides a switch output in addition to the analog signal which enables switching off the machine in case of overpressure according to EN 13849-1, PL=c.

Melt Pressure Transducer with Integrated Amplifier The DAI Series offers – in addition to maximum reliability – improved user friendliness in the form of an Auto-Zero Function for local or remote configuration. These models offer mA and mV output signals for further processing. The popular and most commonly used 2-wire and 4-20mA configuration provide unequalled interference in critical environments.

The DAP Series incorporate a heated sensor tip, which limits the potential for sensor damage relating to the membrane, resulting from installation or removal of the pressure transmitter. The Gneuss patented heated sensor tip allows the sensor to be easily removed from a “frozen” melt without any problems. The diaphragm is not damaged when the polymer contracts. The DAP has revolutionized the handling of critical medias, for example PC, PMMA or ABS.

Easy to use package – SMD (surface mount device) Compact and light weight High sensitivity High-performance, stable silicon chip and package Industrial temperature operating range (-25 to 85°C) Gage and absolute configurations 50 mBar – 7 Bar

Single 5 V supply voltage Easy to use package Wide compensated range (0 to 70°C) Up to 15 bits I2C output (pressure + temperature) Standard 0.5 to 4.5 V voltage output Total accuracy down to 1% over 0 to 70°C, all effects included (maximum) Gage and absolute configuration 50 mBar – 7 Bar

Pressure sensor OS 16 & OS 40 is high accurate and affordable industrial pressure sensor with excellent anti-interference capability.

Pressure sensor for relative pressure measurement Robust housing for the use in harsh environments Suitable for relative pressure measurement Suitable for pressure measurement up to 600 bar Simple assembly Certified for shipbuilding and offshore industry by DNV-GL

Pressure sensor for relative pressure measurement Vacuum-proof Various process connections: G¼ B, ¼ - 18 NPT, M14 x 1.5 Measurement range: Min. 2 bar, max. 600 bar Electrical connections: Elbow connector Form A EN 175301-803, Circular connector Euro M 12 x 1, cable outlet 2 m length Certified for shipbuilding industry and offshore by DNV-GL