Cold rolled steel strips - Import export

State-of-the-art technology and extensive knowledge in the processing of steel characterise our location in Bad Salzungen, Germany. For us, performance means a wide range of cold-rolled steels of the highest quality at competitive prices, flexibility and a high degree of readiness to deliver while adhering precisely to the specified chemical and mechanical values. Surface finishing by electrolytic galvanizing and/or subsequent customisation of your goods are possible for us. We offer all our customers spooled materials with volumes of over 200,000 metres of metal strip per spool. This further development means a considerable advantage for our customers. Personnel-intensive set-up times and machine downtimes are avoided.

This material group comprises C-steel with low carbon content, good formability and fineblanking quality. Due to case hardening, the components have low-wear surface layers with high hardness and sufficient toughness in the core. They thus combine numerous properties and application possibilities in a wide variety of industries. To increase the wear resistance, you can also carburize or carbonitrate partial areas. C 10 E, C 15 E /➔ according to DIN EN 10132 - 2 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.

Cold rolled strip is used in a variety of applications. It meets high demands on forming behaviour, dimensional tolerances and surface finish, which offers our customers decisive advantages! HFP cold rolled strip is ideally suited for all stamping, bending, drawing and deep drawing purposes. From ball bearing housings to roll cutting and punching strips, hose clamps, headlight reflectors, electrical equipment, office supplies and tubes to safety parts of all kinds, a wide variety of components can be manufactured for various industries. DC 01, DC 03, DC 04 according to DIN EN 10139 / mild steel - St 37/ special grades on request Depending on the customer's requirements, we supply treatment states from LG to C690.

Cold-Rolled Sheet

AMETEK Specialty Metal Products has built a reputation for first class product quality and reliability, and that’s why so many leading commercial and defense aviation programs use our high performance materials. 50 years Aerospace Expertise We have more than 50 years experience developing precision strip, wire and shaped component products for critical aerospace applications worldwide. Our aerospace portfolio includes: High Tolerance Custom Shaped Wire for Aircraft Push-Pull Controls Pfinodal® (C72900) Bearing Material for Landing Gear Bushings and Bearing Sleeves Specialty Shaped Wire for Lock Collar Tape used in Aerospace Rivets Highly Conductive Nickel Strip for Aerospace Electronic Connectors, Batteries, Heat Exchangers and Bellows. Lighter and Stronger Materials for Aircraft Performance At 35,000 feet, every detail matters. We’re dedicated to manufacturing precision, lightweight and high strength materials to enhance the performance and efficiency of aircraft worldwide.

Precision re-rolled stainless steel strip products can be engineered to specific customer requirements with exceptionally short lead times. Based on our longstanding expertise, we can manufacture stainless steel strip to precise custom sizes, ultra-thin gauges and tightly controlled mechanical properties with any surface finish. We also work closely with Hamilton Precision Metals, part of AMETEK Specialty Metal Products, to produce stainless steel foils down to 1.5 microns (.000060”) thickness. Standard Alloys We manufacture stainless steel strip in a variety of chemical and mechanical properties, expertly engineered to your exacting specifications. High performance stainless steel strip material includes: Austenitic: 300 series Martensitic: 400 series Ferritic: 400 series PH Grades 17-7PH®, 17-4PH® Additional options available on request

AMETEK Specialty Metal Products uses a wrought powder metallurgical process to ensure the highest purity finished products. Our main strengths lie in the processing of Nickel, Iron and Cobalt containing alloys amongst other available materials. The processing of these materials begins with the consolidation of powder through a roll compaction process and followed by a controlled atmosphere sintering. Further reduction of the material is performed solely under cold working temperatures to reduce the introduction of non-metallics and annealing is performed under controlled atmospheres. AMETEK Strip Products are produced in ranges between .002” (0.05mm) and .080” (2.03mm) thicknesses in a full range of tempers and widths to 22” (558.8mm) while maintaining special capabilities to produce materials outside of these ranges for special applications. This process lends itself to the production of small but easily reproducible lots of highly specialized alloys

Ti Grade 9 is a near alpha, alpha-beta alloy, sometimes referred to as “half-6-4.” It offers 20 to 50% higher tensile strength than the commercially pure titanium at room and elevated temperatures. It is much more amenable to cold working than Ti 6AI/4V alloy and can be cold worked 75 to 85% to result in moderately high strength and good ductility The alloy can be formed from the annealed temper. Severe forming may be aided by an intermediate stress relief. Stress relieving may be appropriate after severe cold forming to remove residual stresses. Weldability and corrosion resistance is very similar to commercially pure titanium. Welding should be performed with inert gas shielded arc or spot welding.Welding with active gases, coatings, or fluxes must be avoided to prevent embrittlement.

Unalloyed Tantalum is supplied to ASTM F560 – R05200 composition limits. Tantalum is selected for its corrosion resistance, thermal conductivity, high melting point, and ability to form a dielectric oxide film. Tantalum is very ductile and can be readily cold formed due to a low work hardening rate. Welding can be accomplished via resistance, TIG, or electron beam methods, with care taken to protect the weld and heat affected zone from air during welding. Because of the potential for hydrogen embrittlement, Tantalum can not be used for extended service in air or other oxidizing atmospheres above 260°C unless a protective inert atmosphere or vacuum is provided. Available Sizes: Tantalum is available from Hamilton Precision Metals as strip product from 0.0005” to 0.035” (0.0127 mm to 0.889 mm) in widths up to 12.0” (304.8 mm). The material conforms to UNS R05200 and meets the requirements of ASTM F560 and ASTM B708.

AMETEK Specialty Metal Products has built a reputation for first class product quality and reliability. That’s why leading defense programs use our high-performance materials. Leadership in Defense Metals We have more than 50 years of experience developing precision strip and thermal management products for critical defense applications worldwide. Our defense portfolio includes: Thermal management materials for semiconductor heatsinks Nickel strip for battery connectors High Performance Defense Alloys Molybdenum Copper (AMC) and Tungsten Copper (AWC) High purity nickel strip Trusted for Critical Defense Applications Due to their excellent thermal conductivity and controlled thermal expansion, our Molybdenum-Copper and Tungsten-Copper composites are the preferred materials for Gallium Arsenide (GaAs) and Gallium Nitride (GaN) semiconductors for the defense industry. Our heat spreader materials are trusted in sensitive applications such

Here at Hamilton Precision Metals, we’re passionate about cold rolling metal strip in a diverse range of specialty alloys to meet your exacting specifications. Our extensive precision strip product range include stainless steel strip, nickel strip, titanium strip, copper based strip, cobalt based strip and many more alloys. We have the expertise to roll light gauge strip from 1.5 mm (.060”) down to 0.127 mm (0.005”). Broadest Range of Alloys We offer an extensive portfolio of almost every high performance alloy made today. Additional alloys are available upon request, contact us today! Stainless Steels Nickel Based Alloys Copper Based Alloys Cobalt Based Alloys Commercially Pure Titaniums Strain Gage: Constantan®, Evanohm®,

CP Titanium is selected for its favorable strength to weight ratio and excellent corrosion resistance. Two levels of purity permit a choice of finish strength. The alloy can be formed from the annealed temper. Severe forming may be aided by an intermediate stress relief at 1000°F. Stress relieving may be appropriate after severe cold forming to remove residual stresses. Welding should be performed with inert gas shielded arc or spot welding. Welding with active gases, coatings, or fluxes must be avoided to prevent embrittlement. Available Sizes: CP Titanium is available from Hamilton Precision Metals as strip product from 0.0005” to 0.025” (0.0127 mm to 0.635 mm) and widths up to 12.0” (304.8 mm). A foil product is available as thin as 0.000085” (0.002159 mm) and widths of 4.0” (101.6 mm) maximum. The material conforms to ASTM F67, ASTM B265, AMS 4902 and UNS R50250,R50400.

Constantan® is a copper-nickel alloy that contains specific minor amounts of additional elements to achieve precise values for the temperature coefficient of resistivity. Careful control of melting and conversion practices results in a very low level of pinholes at ultra-thin thicknesses. The alloy is used extensively for foil resistors and strain gauges. The TCR can be adjusted from the furnished cold rolled values by using a low temperature heat treatment to achieve compensation for all types of spring elements. The foil is normally supplied with 90% cold reduction and a smooth bright surface. The foil is reasonably flat at 4” wide and nearly free of pinholes. The cold rolled foil can be produced with a TCR between +10 to –35 PPM/°C. The heat treatment will shift the foil TCR to the desired value. A typical heat-treat curve for Constantan® shows decreasing resistivity but increasing TCR with increased heat-treating temperature.

At AMETEK Specialty Metal Products we produce high purity nickel-iron alloy strips, which are primarily used for reed switch systems. These products are widely used in the automotive market for BMS (Battery Management Systems), improved safety in proximity sensors, and cable harness testing. Alloys Our strips are produced using nickel-iron compositions, making sure to use source metals with market leading low levels of trace elements. Alloys include: Nickel-Iron compositions from 36% to 65% Nickel. Sizes Strip thicknesses down to 0.002” (0.0508mm) and wire diameters as small as 0.005” (0.127mm). Applications Finished nickel-iron alloy reed switch systems are used within a multitude of products and devices, mainly being used in the Automotive and Electronics industries. Automotive: BMS (Battery Management Systems), automatic braking assists, door sensors and speedometers.

Automotive safety systems need to be reliable, accurate, and capable of saving lives. We work closely with automotive component suppliers worldwide to develop custom metal strip materials that enhance performance and safety. Precision Engineered Strip for the Automotive Industry You’ll find our strip products in many critical automotive systems in today’s vehicles including: Reed switch systems Nickel strip for EV battery connectors Electronic Connector Materials High Performance Automotive Alloys Nickel-iron compositions from 36% to 65% nickel High purity nickel Strip Spinodal alloys Safe and Efficient Automotive Material Solutions Our metallurgists engineer custom material solutions using the highest quality alloys to ensure maximum automotive performance, reliability and safety.

Guard rails (Road Safety Barriers) and its auxiliary elements, for use in highways and special purposes, are manufactured at our lines.

<Product Description> Bartex Steel Strip & Textured steel strip is a specially heat treated, cold rolled with high carbon steel SAE1078,1080,C80W. In its delivered condition, Bartex has a significantly higher tensile strength and dimensions yield to tensile ratio compared to hardened and tempered material of similar dimensions. The mechanical properties of Bartex are further enhanced by using a controlled strain aging heat treatment. Based on specific applications, strain aging process can be applied to the formed spring. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> All things are standarded and customer can chose just folling its own needs without limitation in use of non commercial sizes. Our raw materials are used only domestic produced for the best guarantee in terms of quality and fair-play even for environmental. In more then 20years of activity .we have been producing a high quality steel strips for different industrial and technical purposed gaining experience to get best results in each market. All processes are done on most modern hardening and tempering facility lines. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> 430: Stainless steel is a low-carbon plain chromium ferritic stainless steel. Mainly used for kitchen grade tables and utensils along with other applications not demanding in anti-corrosion properties. However, the stainless steel has good corrosion resistance in mildly corrosive environments and good resistance to oxidation at elevated temperatures. The steel has limited weldability and should not be used in the as welded condition for dynamic or impact loaded structures. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> SUS420 is a general purpose edium carbon straight chromium high hardenability martensitic stainless steel with good strangth and fairly good corrosion resistance. this grade offeres hardened & tempered martensitic stainless steel 420J1.420J2 440A grades,for custom stainless steel to meet your specific application requirments.high preformance stainless steel strip. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> 304 & 316 stainless alloy resists most oxidizing acids and can withstand all ordinary rusting. However, it will tarnish. It is immune to sterilizing solutions, most of the organic chemicals and a wide variety of inorganic chemicals. Stainless steel is used for critical environments that require a higher level of resistance to corrosion than Type 304 can offer. Type 316 is also austenitic, non-magnetic, and thermally non-hardenable stainless steel like Type 304. The carbon content is held to 0.08% maximum, while the nickel content is increased slightly. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> 301 stainless steel is produced with 20high mills and tension leveller process that is particularly well suited for the manufacture of high strength room temperature springs. Precision Steel 301 stainless steel in the, 1/4 hard, 1/2 hard, 3/4 hard, full hard, and extra hard tempers Stainless steel 301 is known for its high strength and excellent corrosion resistance. Alloy 301 is non-magnetic when annealed however it has the ability to be modified along with its other properties. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> Type 201 stainless steel is Austenitic stainless steel 201 stainless steel with Acid Alkali resistance and high density,no bubbles,nopinhole polishing etc. 201 and 202 is used for to make watch case,watch band bottom with best quality etc.it,s mostly used for make tubes, this is the main usage of 201. Also used for building decoration. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> Our bandsaw blades are widely applied in cutting beef, poultry, pork, frozen meat and fish, especially for meat with bones. The bandsaw blades are processed by Gronding to ensure the smooth and teeth. Manufactured using high quality ally steel (SK4)with unique heat treatment technology results in excellent tooth rigidity without losing flexibility. Our advanced grinding, teeth shaping, high frequency quenching process enables our blades to be suitable for the following applications. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> Our reed could help the weaving loom to get high performance,high speed and high quality fabric. We have a punch machines,polish machine,straight machine and other machineries. Our company is supplying a high quality dent with SUS420J2 & SUS301. <Product Specification> Thickness(mm) : 0.14/0.16/0.18 ~ 0.70 Width(mm) : 103 ~ 118 Tencile Strength(N/mm²) : 1450 ~ 1700 Hardness(HV) : 520 ~ 550 <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

<Product Description> 1. Made from high quality,hardened carbon steel for added durability 2. Universal Fit Either 1"(25.4mm)hole sizing with your Blade Hrardware 3. Suitable for cutting different grass,weeds,brush and shrubs. * UFO BLADE is made to levitate so that it is not difficult to work on. <Product Specification> Thickness(mm) : 1.8 / 2 Width(mm) : 80 & 90 Steel Grade : AISI420 & SK5 & SKS51 Kind : Basic & UFO <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.

In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

DC01 DC03 DC04 DC05 DC06 EN 10130 / EN 10139