Drainage pipes - Import export

Available with either 2 zip front door, or 1 zip front door with short rear zip, for all your Butt Fusion/Electrofusion requirements. Standard specifications: - 8oz cover material - 2 zip front door - Flame retardant (BS7837:1996) - Non-conductive with fibreglass frame - No loose components - Rubber feet for extended product life - Insulated and fully enclosed centre joint for operator finger protection - Waterproof - Guy lines & tent pegs - Storage carry bag - Assembly instructions

The CEE floor tank 6620A consists of a housing made of stainless steel 1.4301 (3 mm) and a 20 mm thick cover made of anodized aluminum that can be closed with a tool. When closed, the CEE floor tank is not waterproof. In the outdoor area, a drainage pipe must be provided on site for the housing to be drained. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in plugs. Other equipment variants on request.

Framework galvanized bolted steel. Wall / Facade Structure made of galvanized steel, cladding of nonflammable Plasterboard A1. Cladding of concrete fiber panels (natural, rock and wood appearance). Roof Panel and galvanized steel roofs, a wide selection of roof coating (galvanized and painted trapezoidal sheet or sandwich panel coating with polyurethane insulation, or tarred corrugated plates). Metallic or Pvc rain gutters and drainage pipes. Insulation Rock wool or glass fiber Door exterior (Steel, aluminum, Pvc, fireresistant doors, antiintruders protection); interior( Mdf, Aluminium, Pvc, fireresistant doors) Windows Doubleglass with Pvc or aluminum frame, doublepanel windows, sliding or guillotinestyle. Parasol, rolling shutter in Pvc, steel antiintrusion protection. Painting Exterior in silicone or epoxy. Interior polyurethane. Electrical system lighting structures, sockets and switches, cables, fuses and fuse boxes, relays.

Find our prefabricated studio or onebedroom houses that are perfect for creating a small, comfortable, and economical living space. Assembly time of 3 hours! Only 3 working hours will be needed to complete the assembly of steel structure, walls, and roof of a prefabricated studiotype house! The walls and roof are shipped precut. The system is completely bolted and no required any welding or cutting! The structure is in highly galvanized light steel. The interior and exterior precut walls are formed of a highly galvanized steel frame with a double surface of nonflammable class A1 fiber cement board. The walls are insulated with rock wool or polyurethane with a thickness of 80 or 100mm. Highly galvanized steel trusses and purlins form the double or single pan roof. The rainwater drainage pipe is made of PVC (or aluminium). We offer many choices of finishing materials floor covering, fitted kitchen, sanitary equipment. We also manufacture your studio

With a boom in the construction of the drainage systems, the demand for better pipes arose, to replace traditional concrete conduits, coupled with the shortage of workforce and rising installation costs, as well as environmental problems. steel corrugated pipe (SCP) with its high outer pressure, enhanced structural strength, durability, and affordable prices, has emerged as an alternative. The steel corrugated pipe has an ideal drainage structure that can reduce construction expense and easy to install due to its excellent structural stability and durability and long life span. steel corrugated pipe : SCP 1RS : D300mm~D1800mm steel corrugated pipe : SCP 3RS : D900mm~D2400mm Korea industrial standards : KS D 3590 Corrugated steel pipes (CSPs) are mainly used as pipes for stormwater, drainage, sewage, and wastewater and can be applied in most civil engineering sites, including arable land readjusted, forest roads established, expressways, bridges, and agricultural waterways.

Neaustima produces: - CE certified geotextile for soil stabilization (made from recycled textile fibre) - geotextile for pool installation (from virgin polyster) - geotextile for wrapping drainage pipes (made from recycled textile fibre)

We offer cleanout set. Plumbing cleanout is a cleanout fitting with a removable plug that is found in a roughed-in waste system. It is designed to help keep clear any type of debris that could cause any type of stoppage in the water drain lines. Cleanout sets are usually placed at the connection point between the sewer lines and the drain lines where the base is located of a vertical stack, and at all places were the pipe direction changes at about 90 degrees. Material: Products are available in Stainless Steel AISI 304 (EN 1.4301) / AISI 316 (EN 1.4401 / 1.4404), Chrome plated Brass, Nickel Bronze Sizes: Currently sizes available are 200X200mm, 150X150mm 100X100mm, 80X80mm etc. Special sizes can be made as per your requirement.Finishes: Various finishes are available like MATT, MIRROR, and SATIN Fitment: It slips snugly into the drainage pipe and is easy to install. Cleanouts can be designed to fit various pipes. Designs: Various types of sizes and designs are available.

▪ Material and design in compliance with section 7.3 (Tubing Installation) of the Norwegian offshore standard Norsok Z-010 (Revision 3, published in October 2000 ), API RP 552 and NACE SP 0108-2008 (section 13) Clamp body made of flame-retardant PP-V0 plastic material (tested and V0 classified according to UL 94) Integrated anti-corrosion elastomer strips avoid the accumulation of seawater between clamp body and pipe Drainage channels aid the dispersal of seawater (self-draining) ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced corrosion resistance by practically excluding metallic and non-metallic impurities during production, processing and handling ▪ Suitable for continuous exposure to temperatures from -25 °C to +80 °C (from -13 °F to +176 °F) ▪ High UV stability of the clamp body material; resistant against seawater, rain and oil ▪ To be used in sub-sea and top-side environments; alleviating the requirement for two different...

We procure a variety of components in the domain of energy and infrastructure: - Steel Pipes - Plastic Pipes - Pipeline Fittings and Flanges - Pipe Coatings and Linings - Pipe Insulation and Heat Tracing - Pipe Support and Hangers - Pipeline Valves - Corrosion Protection and Cathodic Protection Systems - Consultation and Project Management

The exclusive MASTER 3 sound-insulating drain system from SANHA consists of high-quality three-layer pipes and modern fittings. The drain pipes are constructed with three perfectly matched layers that work together to meet all the demands that a drain system is subjected to in the construction of a modern house, apartment and industrial building. Each layer optimises the properties of the pipe: The smooth inner layer prevents encrustations and is partly responsible for the good sound insulation properties. The solid middle layer is extremely robust and the brown outer layer provides excellent impact resistance even at low temperatures. The sealing ring consists of styrene-butadiene rubber (SBR).

Adaptor Couplings, sometimes referred to as reducer couplings, are designed to connect unadopted drainage pipes with different outside diameters – connecting larger drainage pipes to smaller drainage pipes and vice versa.

Wraparound Couplings are designed to seal cracks in drainage pipes by simply wrapping around the the cracked area and connecting. This eliminates the need to cut out and section of pipeline and replace with new.

Drain Couplings, sometimes referred to as couplers, are simple, easy to use drainage pipe connectors. Drain Couplings are designed to connect two pipes with the same or similar (within 10mm) outside diameter.

The removal of mineral deposits, concrete, slag, filling compound or similar substances in pipe and sewer systems is made possible by this newly designed nozzle. The substances are separated in their structure by the vibrations in a specific frequency field and detached from the pipe wall. In particular, drainage pipes in landfill or tunnel areas can also be cleaned without any problems. - Not suitable for vitrified clay or clay pipes.

CYLINDER TUBES (HPS & HPZ) •EN 10305-1 (HP) •EN 10305-2 (HPZ) •EN 10305-2 (HPS H9) Seamless, cold-drawn HP precision steel tubes EN 10305-1 Seamless, cold-drawn HPZ tubes have the best dimensional tolerances, plus excellent straightness and roundness. These tubes are thus excellently suited to peeling or honing. A recommended ultrasonic test can also be carried out for a surcharge Facts and Figures Diameter (OD)50,0 mm – 125,0 mm Wall thickness (WT)5,0 mm – 7,5 mm MaterialE355 Treatment condition+SR TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

BOILER TUBES •EN 10216-2 •EN 10216-3 •EN 10217-2 •EN 10217-3 Seamless tubes for pressure purposes EN 10216-2 •unalloyed and alloyed tubes, increased temperature Seamless boiler tubes of this standard have extraordinary temperature and pressure resistance. Due to the production process, a great deal can be offered with regard to purpose-optimized steel qualities. Facts and Figures Diameter (OD)21,0 mm – 610 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialP195 GH P235 GH, P265 GH, 16Mo3 13CrMo4-5, 25CrMo4 10CrMo9-10 Treatment condition+N TestsTC1 (not including US testing) TC2 (including US testing) VersionsBlack, painted Device pressure standardsAD-2000 W0, AD 2000 W4, PED ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

PRECISION STE EL TUBES •EN 10305-1 •EN 10305-2 •EN 10305-3 •EN 10305-4 (HPL) •EN 10305-5 Seamless, cold-drawn precision steel tubes EN 10305-1 Seamless, cold-drawn precision steel tubes have a particularly high dimensional tolerance with regard to the outer and inner diameter and/or the wall thickness. T Facts and Figures Diameter (OD)4 mm – 125 mm Wall thickness (WT)0,5 mm – 13,0 mm MaterialE215, E235, E255, E355, C35E, C45E 16Mo3, 25CrMo4, 42CrMo4, 25CrMo4 other materials upon request Treatment condition+C +LC, +SR, +A, +N TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89