Temperature sensing devices - Import export

Ex Thermostat - the Thermostat serves for limiting, monitoring or control of room temperatures, medium or surface temperatures within hazardous areas of categories 2 or 3. Type ExTR60E-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with knob, current rating 16A. Type ExTR60D-50 Standard Ex Thermostat with temperature range -20 ... +50°C, adjustable with screw, current rating 16A. Type ExTR60D05/10/15 With fixed temperature 5 / 10 / 15°C - for simple control of the room temperature (e.g. frost protection) in explosion hazardous areas. Design with fix mounted 2m connection cable.

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +260 °C, continuous Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

Temperature range: -100 °C to +260 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous

Temperature range: -100 °C to +450 °C continuous Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous

Temperature range: -100 °C to +180 °C continuous Wire type: Silicone, Tmax: +180 °C continuous

THA 200 THA 400 THA 1000 THA 1250 Compatible with any thermocouple probe type K, J or T (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THK 200 THK 400 THK 1250 Compatible with any thermocouple probe type K, J, T or R/S (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THN 200 THN 400 THN 1250 Compatible with any thermocouple probe type K fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

USB temperature converter - including free readout software - efficient and flexible measurement without additional measuring system - mobile and directly on site - for all common thermocouples.USB stick with software for direct reading and further processing on the PC Plug connection - flexibly connect the USB stick to the temperature sensor Processing of the measured values, transfer to the software Different temperature sensors and thermocouples possible Various cable types , lengths and types of connections can be selected

Format 96 x 96 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 96 mm, portrait Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 48 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

The adhesive kapton foil as accessory to our self-adhesive thermocouples. Temperatur range: +150°C continuous, +260 °C temporary GoodUV-, aging- and solvent resistance

Helpfully for quick installation of temperature probes. These zipties are temperature resistant up to +195°C (temporary), especially to fasten our dipstick-thermocouples on a hot tub. Temperatur range: -40 °C bis +150 °C permanent, +195 °C temporary

Helpfully for quick installation of temperature probes. Our zipties are temperature resistant up to +195°C, especially to fix our dip in a hot. Temperatur range: -40 °C bis +150 °C permanent, +195 °C temporary

Helpfully for quick installation of temperature probes. These zipties are temperature resistant up to +195°C (temporary), especially to fasten our dipstick-thermocouples on a hot tub. Temperatur range: -40 °C bis +150 °C permanent, +195 °C temporary

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +800 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Fibreglass with VA braid, Tmax: +450 °C, continuous

With the sharp needle the thermocouple easily can be stickinto tubes. It allows a fast and easy measurement of the medium inside of thetube. One possible application can be the cooling water tube of an engine. The stainlesssteel plate is made to be tighten by zipties.

With the sharp needle the thermocouple easily can be stickinto tubes. It allows a fast and easy measurement of the medium inside of thetube. One possible application can be the cooling water tube of an engine. The stainlesssteel plate is made to be tighten by zipties.

Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.

This temperature sensor is for measuring the temperature of liquid and gaseous media in engines, sets of machines and utility vehicles. A Pt 1000 thin-film precision resistor is used as the measuring element. The temperature-dependent resistance of the Pt 1000 is evaluated by an electronic circuit and outputted as a temperature-dependent voltage at the sensor‘s output. The interrelationship between temperature and voltage corresponds to the characteristic curve for the Pt 1000 and is thus nearly linear. The assignment between temperature and output voltage is nearly freely selectable, the lesser temperature corresponding to the lesser output voltage. The sensor‘s lowest possible output voltage is 0.1 V and its greatest is 10 V. The output is overload-proof and short-circuit-proof. The sensor has no mechanical moving parts and so is not susceptible to vibration and soiling.

The electronic temperature switch of BEDIA is fitted with thin-film resistor Pt 1000 in a bridge circuit. This sensor element provides close switch point tolerances and a quick response. Switch point and reset hysteresis may be selected within the admissible operating range when ordering so as to allow the monitoring of both very wide and very close temperature ranges. The switching output is protected from short-circuit and overload. The short-circuit current is limited by the output transistor switching off inthe event of a fault. It will automatically reset as soon as the fault has been remedied. The switch is available with ground-connected, plus-connected or potential-free DC switching output. The switch is open in the event of power failure or disconnection of the power supply, independed of the switching function. It is available both as normally open (NO) or normally closed (NC) switch.

These high-power bimetal operated temperature switches are available either with normally closed (NC) or normally open (NO) contact configuration. The robust round metal enclosure accommodates a resilient preloading disk, a bimetal disk and a silver contact. The compact switch system is covered by means of a plate which also carries a silver contact and is isolated from the enclosure by means of an isolating washer. The resilient preloading disk ensures excellent performance. The resilient preloading disk keeps the contact pressure constant throughout the entire temperature range of the BEDIA switch until switching occurs. The mechanically and electrically unloaded bimetal disk snaps over at a preset temperature, with either opening or closing the contact arrangement. The bimetal will only snap back to its initial condition after the temperature has dropped significantly.

This surface thermocouple is made solely for screwing on. The placement of the measurement point the surface to be screwed-on guarantees optimum temperature detection. We kept the most common thread sizes in mind for fastening. Temperature range: -100 °C to +550 °C continuous Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous

This surface thermocouple is made solely for screwing on. The placement of the measurement point the surface to be screwed-on guarantees optimum temperature detection. We kept the most common thread sizes in mind for fastening. Temperature range: -100 °C to +350 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous

This self-adhesive thermocouple is ideal for surface temperature measurements. For both curved and flat objects. The extremely thin wire, not even 1 mm in diameter, facilitates highly flexible installation. The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +150 °C continuous, +260 °C short-duration Adhesive foil: Fibreglass, approx. 19 x 25 mm

This self-adhesive thermocouple is ideal for surface temperature measurements. For both curved and flat objects. The extremely thin wire, not even 1 mm in diameter, facilitates highly flexible installation. The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +150 °C continuous, +260 °C short-duration Adhesive foil: Kapton, approx. 9 x 20 mm

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +800 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Silicone, Tmax: +180 °C, continuous