Window manufacturers - Import export

Corvision, the meeting between the minimal aspect and the possibilities of your project. This solution proposed in all these variants brings us closer to the exact idea of ​​our vision. A minimalist uniform covering for all of your needs whatever the criteria.Everything has been thought of down to the smallest detail. Speed ​​of installation, ease of maintenance for a most remarkable result. We have put our heart into releasing this range to suit all budgets. Have you dreamed about it, we can make your dream come true! You will find further information at the attached pdf documents below or ask us at bazanovaltd@gmail.com

ALL TYPES OF IRON STRUCTURES, RAILINGS, WINDOWS, DOORS, GATES, STAIRCASES. WE MANUFACTURE ALL KINDS OF IRON STRUCTURES, FROM DRAWING TO DESIGN

We manufacture wood aluminum windows on different thicknesses. We can equip them with double or triple glazing, as requested. We also offer solutions for passive houses with Uf = 0,73 W/m2k.

We manufacture wood aluminum windows on different thicknesses. We can equip them with double or triple glazing, as requested. We also offer solutions for passive houses with Uf = 0,73 W/m2k.

We manufacture wood aluminum windows on different thicknesses. We can equip them with double or triple glazing, as requested. We also offer solutions for passive houses with Uf = 0,73 W/m2k.

Eco-Wood-Turn & Tilt Window Wooden inward opening windows based on German technology of ironmongery (Turn & Tilt or Tilt & Turn). Eco is our most ecological and economical wooden window system. It is easily recognized by aluminium drip cup visible on the outside. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive. With a variety of RAL colours, decorative bars and finishings, as well as the wide selection of accessories that we have to offer, windows can be created according to any tastes or needs.

Balcony (Casement) door is suitable especially for terrace and garden entrances and allows smooth transition from interior to exterior. The difference between balcony door and entrance door is mainly the width of the door leaf. Balcony (Casement) door leaf is as smooth as window leaf, handle is mostly inward only. Our Balcony (Casement) doors are available with two types of thresholds: standard or low. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive. With a variety of RAL colours, decorative bars and finishings, as well as the wide selection of accessories that we have to offer, windows can be created according to any tastes or needs.

Traditional-Wood-Turn & Tilt Window Wooden inward opening windows based on German technology of ironmongery (Turn & Tilt or Tilt & Turn). The traditional design is based on the time-honoured construction and classic look of our wooden windows. More than 3 different designs are available. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive. With a variety of RAL colours, decorative bars and finishings, as well as the wide selection of accessories that we have to offer, windows can be created according to any tastes or needs.

Classic-Wood-Turn & Tilt Window Wooden inward opening windows based on German technology of ironmongery (Turn & Tilt or Tilt & Turn). The Classic line is a combination of modern technology for long life and the traditional look of our wooden windows. It is easily recognized by aluminium drip cover with wood on the outside. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive. With a variety of RAL colours, decorative bars and finishings, as well as the wide selection of accessories that we have to offer, windows can be created according to any tastes or needs.

The outward opening CASEMENT is the UK’s most frequently chosen timber window design. The profile reflects a proven ability to withstand exposure to adverse weather conditions. The FLUSH CASEMENT is especially designed to replicate a period window whilst incorporating the latest modern operating and security features. Often called a ‘conservation window’, the design is characterized by a sash that sits within the frame to create a flush finish externally, the perfect choice for listed properties. The internally-glazed design containing a modern concealed-multi-point locking-system provides high security features compliant with Secured by Design conditions. The sash stands proud of the frame giving excellent gasket compression and the best weather rating available. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp.

The SLIDING SASH is the UK’s most traditional timber window design. The Windows’ up-and-down sliding system allows any costumer to save the useable area inside the room. The leaf drive is supported by springs arranged on the sides of the leaves so that the window opens effortlessly. The internally-glazed design containing a modern concealed-multi-point locking-system provides high security features compliant with Secured by Design conditions. The sash stands proud of the frame giving excellent gasket compression and the best weather rating available. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive. With a variety of RAL colours, decorative bars, finishings, and the wide selection of accessories that we have to offer, windows can be created to any tastes or needs.

A range of Alu-Wood windows and doors is made of a solid wood from the interior side with additional protection of aluminuim cladding on the exterior side of the product. Such a combination of wood and aluminium guarantees low maintenance costs, energy saving, and high resistance to adverse weather conditions. ‘TT’ is a symbol (abbreviation) of inward opening windows based on German technology of ironmongery (Turn & Tilt or Tilt & Turn). What’s more, the aluminium cladding is available in various finished designs – Classic, Rondo, Contour, Quadrat FB, Retro, Linear – that not only increases the performance of windows and doors but also maintains elegant and modern which is associated with wood craftsmanship. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive.

Bifolds are folding sliding doors that open up an entire wall to really give your home the wonderful “outdoor-indoor” feeling all year long. The design is able to support panels weighing up to 150kg with precision and ease. A maximum of 6-8 equal size panels can fold seamlessly in each direction in a number of different configurations while doors can slide either inwards or outwards. Our bifold doors are secure and safe. Our internal beading, shoot bolt and cam locking mechanisms will provide solid barriers against forced entry. Don’t risk the security of your home and family – make sure the doors that you buy make you feel safe and sound at your living place. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive.

Entrance Door is not only the main showcase of your house but also has to be strong enough to secure your living space. Entrance door essentially has a strong door leaf, secure ironmongery, 3-or-5-point lock and hinges ready to handle 10 000 open/close cycles. Our Entrance doors are available in three different constructions: Classical, Decorative and flat Solid Door which open either inwards or outwards. Design of Classical is similar to windows’ design ?(Soft-Line, Retro)?. Many models of doors are available. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive. With a variety of RAL colours, decorative bars and finishings, as well as the wide selection of accessories that we have to offer, windows can be created according to any tastes or needs.

Entrance Door is not only the main showcase of your house but also has to be strong enough to secure your living space. Entrance door essentially has a strong door leaf, secure ironmongery, 3-or-5-point lock and hinges ready to handle 10 000 open/close cycles. Our Entrance doors are available in three different constructions: Classical, Decorative and flat Solid Door which open either inwards or outwards. Many models of Solid Doors are available. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive. With a variety of RAL colours, decorative bars and finishings, as well as the wide selection of accessories that we have to offer, windows can be created according to any tastes or needs.

Our Lift & Sliding Patio Doors provide huge unobstructed glass areas combined with the state-of-the-art effortless sliding mechanism required to support such impressive doors. Our system provides secure, lightweight, and easy-to-move single sashes weighing up to 400 kg. Many opening schemes are available in these up-to-6-sashes doors. Our doors are among the most secure and safe on the market and often far surpass the European standards. They’re protected by our state-of-the-art multi-point locking system and an ingenious anti-lift design which keeps your home always secure. Two different designs are available. We supply windows manufactured from multi-layered laminated woods in Mahogany and Pine designed not to twist or warp. Other woods including oak and larch will be supplied for special projects where the volume is of sufficient size to not make the cost too prohibitive.

uPVC window reinforcements for all systems present on the market: Aluplast, Avantgarde, Brügmann, Decco, Deceuninck, Foris, Gealan, Inoutic, Rehau, Salamander, Veka, Wital, System Profine Our production is based on internal system procedures and the highest standards, which correspond to the requirements of European harmonized standards, including PN EN ISO 9001, PN EN 10162.

pvc doors

Aluminium Door and Window Systems ( Any surface)

Year - 1969 Grinding machine, also suitable for manufacturing window gummers

Double Mitre Saw with 500 mm sawblades; customized for aluminium profiles. Second head moving on linear guides via rack&pinion and servo drives. Both heads tilting inside 45 and 90 degrees pneumatically and all in between degrees are adjusted manually. Thanks to the fixed roller conveyor mounted on the secondary head and the manual supports, the profiles are placed on the machine easily and cut perfectly.

Double Mitre Saw with 500 mm sawblades; customized for aluminium profiles. Second head moving on linear guides via rack&pinion and servo drives. Both heads tilting outside 45 and 90 degrees pneumatically and all in between degrees are adjusted manually. Thanks to the fixed roller conveyor mounted on the secondary head and the manual supports, the profiles are placed on the machine easily and cut perfectly.

Double Mitre Saw with 600 mm sawblades and 6 meter cutting length; customized for aluminium profiles. Second head moving on linear guides via rack&pinion and servo drives. Both heads tilting inside 45 to outside 22.5 and 90 degrees all inbetween degrees are adjusted electronically through servo motors and harmonic reducers. The advanced reducer technology that we use on this mechanism allows the servo motors work with zero backlash and maintain the most precise angular adjustment. Thanks to the fixed roller conveyor mounted on the secondary head and the manual supports, the profiles are placed on the machine easily and cut perfectly.

The Double station CNC Panel Working Machinery specialized for machining aluminium composite panels. Also called in the market as ACP panels or ACM panels. The machine first grooves and then cuts the aluminium composite panels by using cutter bits using 2 high speed spindle motors, clamps the panels by vacuuming with a vacuum table and vacuuming pump, extracts the swarf coming out from the panel by a dust extraction system. Thanks to the double station working system, it is possible to load 2 different panels with lengths up to 3.200 mm each and while the machine is processing one of the panels, it is possible to load and offload the other panel in the other station. This machine has a 50% increased capacity compared to the single station machines. All axes are moving on linear guides and moved by servo motors with reducers controlled by a real CNC controller.

The Compact Design CNC profile machining center with 4 controlled axes X-Y-Z-A. The machine is mainly designed for processing aluminium profiles. Apart from aluminium, it can also process any light alloy profiles with the help of dedicated customized cutters. The bridge carrying the high-speed electro spindle moves on linear guides by the brushless servo motors independently from the drive and processes any shape on the profiles. The electrospindle can rotate from 0 to 180 degrees independent from the drive and machine in any angular position and change the tools from the tool changing magazine with 7 positions. The CADCAM software is a customized tool for “ino machinery” profile machining centers. The pneumatic reference point tilts up and down automatically according to the machine’s working cycle.4 pieces of profile clamping units are positioned manually by the operator according to the places that the CADCAM decides.

ino XP 8000 is a Gantry type 4 axis CNC machining center for processing profiles. The Maxi-Steel type of extra strengthened machine body has a huge rigidity and flexibility in processing profiles of 350 mm X 350 mm in 0,1 mm / 1-meter precision and 80 mt./min X-Axis speed. With the heavy body and the gantry type of machining bridge, it is possible to process the heaviest aluminium profiles, even hardened steel and stainless steel profiles. The clamping units are moved automatically by the column, and the data is collected from the 3D CADCAM profile machining software that generates G codes from the profile drawings. All profile data can be imported from dxf and dwg files very easily through the software. The machining operations can be programmed by using the ready macros for drilling and milling. The machine has a 7.5 kW 24.000 rpm spindle with adjustable speed for different thicknesses of materials.

The CNC Panel Working Machinery specialized for machining aluminium composite panels. Also called in the market as ACP panels or ACM panels. The machine first grooves and then cuts the aluminium composite panels by using cutter bits using 2 high speed spindle motors, clamps the panels by vacuuming with a vaccum table and vacuuming pump, extracts the swarf coming out from the panel by a dust extraction system. All axes are moving on linear guides and moved by servo motors with reducers controlled by a real CNC controller. The machine can process light alloy materials such as: aluminium composite panels, HPL, aluminium panels up to 20 mm of wall thickness, bakelite, copper, acrylic, plexi-glass and etc. The machine has a very technologic vacuuming table made from plastic. The user does not need to isolate the table with gaskets like in the old system. The vacuuming is isolated inside the vacuuming system under the table and has a very high clamping force.

ino XP 9000 is a real 5 axis CNC Profile Machining Center working on X-Y-Z-A-C axis independently. Thanks to the CNC controller unit it is possible to make any routing, drilling, milling, notching and cutting operations on the profile pieces in any angle and any position. The machine has a standard size of 7.5 meters and optionally 9.5 meters and 11.2 meters. The pneumatic profile holding clamps are moved by the C column itself and positioned according to the placed that are read from the Profile Machining Software to prevent from collision and for the best grip of the profile piece. The Bi-Rotary head can tilt in A axis +/- 180 degrees and in C axis +/- 325 degrees with the spindle attached 12.0 kW 24.000 rpm with HSK-F63 tool holders. The machine has a tool changer magazine of 10 positions and 1 for the notching and cutting blade. The blades that can be attached on the machine varies from 120 mm to 500 mm max.