BIMAKS KIMYA VE GIDA DIS TIC. LTD. STI.

GENERAL DESCRIPTION MAKS 400P is super-threshold agent able to stabilize a wide range of supersaturated salt solutions. PRINCIPLE USES MAKS 400P is one of the principal antiscalants used by the membrane industry. For many years MAKS 400P has found application as an antiscalant and antifoulant in membrane systems using a wide selection of brackish, high salinity, process and effluent feed-waters. PRODUCT BENEFITS Highly effective antiscalant across a broad spectrum of waters Minimizes scale formation and reduces frequent membrane cleaning Reduces or replaces the need for acid Cost effective application due to low dose rate Compatible with all membrane types Effective iron sequestrant More stable and more effective than sodium hexameta-phosphate (SHMP) Enables systems to work at enhanced rates of recovery Extensive portfolio of toxicological and environmental data available NSF approved for use in potable water production up to 10 ppm (mg/l)

GENERAL DESCRIPTION MAKS 430 is a liquid antiscalant for reverse osmosis systems specifically designed for sea water applications. PRODUCT BENEFITS Prevents silica and hardness salts formation and increases system efficiency Eliminates acid usage and provides a safe working environment Contains active ingredients for sludge formation prevention and increases membrane cleaning range Effective at low dosages Compatible with all membrane types Easy and safe to use Especially designed for membranes functioning with seawater Complies with NSF up to 15 ppm Enhanced formula prevents activity loss during long term storage and usage

GENERAL DESCRIPTION MAKS 473 is a non-oxidizing and non-ionic antimicrobial formulation. PRINCIPAL USES MAKS 473 is a biocontrol agent for use in membranes and pre-treatment plants. It has a broad spectrum of activity and application on a routine basis preventing the growth of biofilms on membrane surfaces, filter media and pipe-work. MAKS 473 may be used as a storage preservative for certain types of membranes. PRODUCT BENEFITS Broad spectrum of activity Readily biodegradable and easily deactivated to harmless by-products Non-foaming Compatible with most of the membrane types

GENERAL DESCRIPTION MAKS 1100 is a catalyzed oxygen scavenger in liquid form. PRINCIPAL USES MAKS 1100 is an oxygen scavenger designed to control oxygen corrosion in boiler systems with/or without deaerators. MAKS 1100 should always be applied together with an internal scale/deposit inhibitor for a complete boiler treatment program. PRODUCT BENEFITS Reduces dissolved oxygen in boiler feed water systems to protect from corrosion Catalyzed form for faster reaction at lower temperatures Enhanced formula prevents activity loss during long term storage and usage Complies with FDA and USDA regulations in food industry, potable water, sterilization and steam humidification Can be used at pressures up to 40 bars

GENERAL DESCRIPTION MAKS 1240 is a boiler feedwater treatment containing special polymers and phosphonates. PRODUCT BENEFITS Includes online cleaners removing scale and iron deposits during operation Designed to prevent scale and corrosion formation in feedwater boiler systems Prevents under deposit corrosion in boilers Reduces deposits, resulting in more efficient heat transfer, energy savings and fewer acid cleanings Designed for soft feedwater boiler systems FDA 21 CRF 173-310 approved Supports internal metal passivation in feedwater and boiler system Enhanced formula prevents activity loss during long term storage and usage

GENERAL DESCRIPTION MAKS 1300 is an aqueous blend of the neutralizing amines. PRINCIPAL USES MAKS 1300 is a neutralizing corrosion inhibitor designed for use in steam and complex condensate systems. MAKS 1300 can be used at steam pressures up to 160 bars and temperatures up to 4790C. REMARK: MAKS 1300 is in compliance with FDA regulations pertaining to boiler water additives. Maximum dosage in plants subject to FDA regulation does not to exceed 45 ppm in the steam. MAKS 1300 must not be used where the steam produced will contact milk or milk products. PRODUCT BENEFITS Neutralizes acid-forming gases like CO2 Provides corrosion protection in initial, middle and extended areas of condensate systems Reduces condensate system maintenance cost Minimizes boiler tube failures caused by corrosion product in returned condensate

GENERAL DESCRIPTION MAKS 2911 is a liquid blend of specific organic film formers, organic scale inhibitor compounds, polymers and a surfactant. PRINCIPAL USES MAKS 2911 is an advanced "All-Organic" corrosion and deposit inhibitor for open-recirculating cooling water systems. lt is designed to operate at high alkalinities and hardness, minimizing or eliminating the need for makeup pretreatment. MAKS 2911 is effective over a broad range of application parameters. lt is best suited where the alkalinity in the recirculating system will be within the range of 100-500 ppm. The inbuilt chlorine stabilizer and biodispersant for better slime removal enhances the efficiency of oxidizing biocide programs. PRODUCT BENEFITS Controls scale formation at high alkalinity or high hardness conditions Effective corrosion protection on C-steel and yellow metals – “All Organic Inhibitor“ Multi corrosion inhibitor properties including Copper and Copper alloys Not affected by the use of chlorine

GENERAL DESCRIPTION MAKS 4080 is a combination of heterocyclic compounds formulated in an aqueous solution. PRINCIPAL USES MAKS 4080 is a broad spectrum, non-oxidizing micro microorganism control agent for industrial open re-circulating, cooling systems, air washers, brewery pasteurizers and closed systems. It is designed to provide excellent control of microbiological growth, algea and associated deposits. MAKS 4080 is particularly well suited for use in systems with high levels of process contamination, as in the fertilizer, refinery, and chemical, industries. PRODUCT BENEFITS Effective against a broad spectrum of microorganisms over extended periods Helps to minimize slime problems which can cause costly reductions in heat transfer Minimum discharge problems; active molecules are environmentally degradable Easy to apply; active at low dosages. Organic based and can provide minimum 90% protection Does not cause precipitation; does not act with other additives

GENERAL DESCRIPTION MAKS 3000 is a non-chromate film-forming product in liquid form. PRINCIPAL USES MAKS 3000 provides maximum protection for mild steel, copper and yellow metals in closed cooling systems fed with distilled, demineralized or softened water. MAKS 3000 is widely applied in closed cooling systems of steel mills, power stations, refineries and many other industrial plants. PRODUCT BENEFITS Extends equipment life and reduces maintenance costs Environmentally friendly; does not contain heavy metals Compatible with antifreeze

GENERAL DESCRIPTION MAKS FAN COIL TABLET is a slow dissolving biocide tablet that scientifically developed to control slime forming bacterias and other undesired biological growths (Fungea, algea, mildew, virus, etc…) in air conditioning systems. PRINCIPAL USES MAKS FAN COIL TABLET is used as part of a planned maintenance program for air handling units in industrial, commercial and medical establishments, hotels, public and private buildings to reduce the risk of microbio based health risks. PRODUCT BENEFITS Prevents biological contamination in air conditioning systems and avoids the related potential health risks Removes unpleasant odors Reduces maintenance and related costs Avoids overflowings and damaging to furnishings Extended protection to the systems with its slow dissolved structure Easy usage thanks to its tablet form.