Brückenkopf Wiesbaden, Mainz-Kastel Busstation

For the best only the highest quality ICS-ETFE is used for coating stainless steel process and utility pipework, for example. As a special, flame-resistant interior coating, this is particularily suitable for the coating of exhaust air pipework, for example, in factories in the chip, solar cell and fibre optics industries. ICS is FM-approved – each construction part is marked separately with the FM specification. This coating is also tested according to the American safety standard Factory Mutual Research 4910 and suitable for use in clean rooms. The coatings are used, amongst other things, in the chemical industry, the electrical industry, the automobile industry as well as in the food industry and in semiconductor technology. ETFE coatings are particularly well suited for use in the semiconductor and pharmaceutical industry. ETFE resists the most extreme conditions, such as e.g. the processing of high-purity grade water (molecules can still be extracted by this even from...

PU MEMBRANE 450 is a one component, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Body from stainless steel 1.4305 - Theoretical air flow through usable surface up to 75 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Standard: AISI, ASTM, BS, DIN, GB, JIS, AS ETC   Thickness:  0.12-3.5mm   Width:1250/1220/1200/1000/914/762(before corrugation)930/915/910/905/900/880/875/815/810/790/780/680/670/660/655/650(after corrugation) or as required.   Ditch and Peak after corrugation: 12 Ditches/11 Peak; 11 Ditches/10 Peak; 9 Ditches/ 8 Peak   Length: In coil or as required   Zinc Coating: Z40-275g/sqm    Paint Top: 15 - 35 Microns    Paint Back: 5 - 35 Microns    Coating Color: ALL RAL Cards Color    Coating Type: Top Painted : PVDF / HDP / SMP / PE / PU                            Primer Painted : Polyurethane / Epoxy / PE                            Back Painted : Epoxy / Modified Polyester   Coil Weight: 3-8 Tons   Coil ID: 508/610mm Color: RAL Code Or According To Customer's Sample   Spangle: No spangle, With spangle   MOQ: 5 Tons   Package: Standard Sea Worthy Package   Port: China