CERAMIC MOLD PLASTER
Ceramic mold plaster is an industrial casting plaster with a fast shooting featu
Description
It is a mold plaster used in shaping ceramics and ceramics.
- Bulk materials for construction
- MOLD
- plaster
- ceramic
Product characteristics
- Water / Plaster Ratio
- 10 kg of plaster per 6 - 7 liters of water
- Socket Start Time
- 17±2 dakika
- Spread Diameter
- 180 mm - 220 mm
- Freezing Time
- 27±2 minutes
- Fracture in Bending Strength (2h)
- ≥ 1.5 N/mm2 (4x4x16 blocks)
- Fracture in Bending Strength (7d)
- ≥ 3,0 N/mm2 (4x4x16 blocks)
- Compressive Strength
- ≥ 2,5 N/mm2 (4x4x16 blocks)
- Surface Hardness (2h)
- ≥ 4 N/mm2 (4x4x16 blocks)
- Surface Hardness (7d)
- ≥ 10 N/mm2 (4x4x16 blocks)
- Expansion
- 0,075 %
- Dry Unit Bulk Weight
- 680 - 700 kg/m3
- Fire Response
- A1 (According to TS EN 13279 - 1)
- Its Standard
- TS 7809
- Type
- Polypropylene Bag PP5
- Weight
- 30kg ± %2
Similar products from KAYADERELI CONSTRUCTION
KAYADERELI CONSTRUCTION
Turkey
Repair and renovation application makes it practical. High addressability has.
KAYADERELI CONSTRUCTION
Turkey
Repair and renovation application makes it practical. High addressability has.
KAYADERELI CONSTRUCTION
Turkey
Ideal for detail work. It is aesthetic. It is economical.
KAYADERELI CONSTRUCTION
Turkey
INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.