CLIXAR

The sealing wire consists of twisted or twined steel threads with or without a braid. The wire is used to fasten rotary seals and latch seals. The degree of reliability of the installed seal depends on the correct choice of the sealing rope. When choosing a sealing wire, it is recommended to pay attention to the following parameters: hole diameter in the seal type of steel (galvanized, copper-plated, stainless steel) coating of steel threads wire diameter number of cores tensile force The wires are used wherever rotary, lead, or latch seals are required. The installation of these seals is carried out on objects with eyelets or on large objects. We offer the following types of sealing wires:

The Arrow V3 tamper-evident polypropylene tightening seal. The structure of the seal features a catch, a locking mechanism, and a tail part. The locking mechanism is equipped with a four-leaf metal collet of spring stainless steel. The operating length of the seal is 385 mm (15.16"). The locking mechanism features the leaves of the collet that are pointed in one direction, thus blocking the reversal movement of the seal tail, and preventing its opening unnoticed. If anyone tries to open the seal and pull out the tail - the lock cuts the tail off and the seal can not be restored. A transparent cap is placed on top of the collet, which protects it from external damage and makes it possible to check its integrity at any time. The cap also glows under the UV light, which makes it easier to detect the seal or check it in poor light or darkness by using a special UV flashlight.

The tightening seal Bankseal is a monolithic polyethylene tightening seal that has a self-locking mechanism. It was developed specifically for the banking sector, but it has also been successfully used for sealing a huge number of other items and facilities. The Bankseal consists of a catch, an internal locking mechanism, and a ribbed tail. The locking mechanism features the two-leaf collet, which allows the tail part of the seal to be pulled in one direction only and has no reverse movement. Thus, the lock does not allow pulling the tail part backward. To prevent the possibility of the seal replacement, an individual number is applied to its catch. The number is marked through the thickness of the coating by laser, thus the number cannot be erased or counterfeited. In addition, the company logo, QR, and bar codes can be marked on the catch.

The tightening seal Capseal is made of polyethylene and designed specifically for gas cylinders. These seals have a one-piece tightening-type case structure, which consists of a round bowl, a locking mechanism, and a tail part. The bowl covers the side of the valve to prevent the possibility of connecting a tube to it and pumping out the gas. The internal locking mechanism operates based on a three-leaf collet and is protected from external mechanical impacts. The ribbed tail ensures reliable fixation of the seal on the cylinder preventing reversal movement of the tail. Additional protection provided for Clixar tamper-evident seals is a special laser marking applied through the thickness of the surface. It cannot be erased, replaced, or counterfeited without leaving obvious visible marks. Using the same method, the customized number is applied to the Capseal bowl, thus eliminating the possibility of replacing the seal and providing a convenient accounting option.

Carat is an anchor seal made of polycarbonate. The design of the seal consists of two pre-installed parts: a transparent body with holes for the rope, as well as a anchor insert that fixes the rope inside the seal. Parts of the seal are made in several colors, yet they are transparent. This feature enables users to monitor the integrity of the locking mechanism and rope because they remain visible during operation. The seal insert is equipped with a convenient head that ensures easy closure of the seal, as well as control of possible attempts of unauthorized access or tampering. If such actions are attempted, the seal leaves visible signs of tampering, which is an indicator of attempted unauthorized access. Laser marking is additional protection against tampering or counterfeiting. It is applied through the thickness of the surface eliminating the possibility of replacing or counterfeiting the numbers and the seal as a whole. The application of customized numbering makes each seal

Garant is an anchor seal that is made of polycarbonate and consists of two pre-installed parts: a transparent body with holes for the wire, as well as the latch insert. The latter securely fixes the wire inside the seal. The insert has special ribs, which exclude the possibility of opening the seal backward. Transparency of the parts enables users to monitor the integrity of the locking mechanism and the rope. The seal insert has a convenient head that makes it possible to easily close the seal, as well as control attempts of unauthorized access or tampering. If these manipulations are attempted, the seal displays visible signs of impact, which is an indicator of attempted tampering. Additional protection against tampering and forgery is provided by laser marking - the seals are marked with unique custom numbering. The number is applied to both elements of the seal structure: the case and the insert. Laser marking is made through the thickness of the surface of the seal

The Lumiseal twist seal is made of polycarbonate and consists of two pre-installed parts: the case and the rotor with catches featuring the unique number. It is applied by laser, which virtually eliminates the threat of counterfeiting or replacing the seal number. The rotor of the seal can only be rotated clockwise, so you can be sure that once the seal is installed, no one can open it without leaving visible signs of tampering. An additional degree of protection is marking applied by laser through the thickness of the seal surface. Thus, it cannot be erased, removed, or counterfeited. The unique number is applied on the case and the inner rotor, so no one can replace any part of the seal. Additionally, your company logo, QR, and bar codes can be marked on the case catch.

PGK is a valve locking device made of polycarbonate and used to restrict access to the valves of taps supplying gas or water. The product consists of two parts that are installed on the tap. To attach the locking device, it is required to put the sealing rope through the special holes on the locking device. The process should be completed by installation of a rotary or latch seal which is securely fastened with a cable to the blocker and also prevents the chance to remove the locking device without any visible signs of damage to the seal. The is used to restrict access to the valves both in residential houses and at industrial sites. And the seal enables you to check whether there was an attempt to open the locking device with the intention to steal gas or water.

PGS is a locking device for pipes made of polycarbonate or polypropylene. It is designed to seal cap nuts to prevent their twisting and disconnection of pipes, as well as the removal of gas meters and installation of bridge cables for bypass devices for the purpose of stealing gas. The pipe locking device consists of two semicircular-shaped parts with additional holes for the sealing rope. To install the pipe locking device, it is necessary to connect both parts on the mounting nut, put the sealing rope into the special holes on the sides of PGS, and install the seal (rotary or latch one). The seal should be placed as close as possible to the locking device. The tamper-evident seal and rope will prevent intruders from keeping the fact of removal of the seal and the locking device from the nut unnoticed. When an attempt is made to perform certain actions with the aim to steal gas or water, visible signs appear on the seal, which is evidence

The tightening seal Postseal is a monolithic polyethylene seal. Clixar developed a self-locking mechanism for the lock with an asymmetrical double-sided arrangement of elements. It simplifies the installation process of the seal and makes its opening more complicated. The unique number is applied to the seal's catch. The application is performed by laser marking through the thickness of the seal's surface making it impossible to erase the number without visibly damaging the seal's surface. In addition to the individual number, it is also possible to mark the seal with your company logo, QR, and bar codes. Advantages of the tamper-evident seal Postseal: The reinforced cast locking mechanism Special tenons to attach the seal to bags securely Self-locking mechanism of the lock Patented product from the manufacturer