FIX gypsum-based adhesive for plasterboards

SATEN is a fine gypsum-based skim coat compound for manual application on different types of substrates. Application: • Filling into small gaps and overhauls • Suitable for complete skim coating • Application in premises with normal humidity • It provides a smooth and high-quality surface of interior walls and ceilings, ready for finishing coatings and decorations Advantages: • Creates a perfectly smooth surface • Fills minor damages to 5 mm and cracks on plasterboards or other surfaces • Economical because of the thin layer that has to be laid TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type 3B • Paper bag: 10 kg / 25 kg • Mixing Ratio: ~ 7.5 l water: 10 kg; ~ 18 l water: 25 kg • Coverage: ~ 11 m²/ 10 kg; ~ 29 m²/ 25 kg • Consumption: ~ 0.85 kg/m² • Bond strength: 0.5 MPa • Bags per pallet: 60 pcs / 40 pcs • Pallet weight: 600 kg / 1000 kg

FUGA & FINISH Light is a lightweight, ready-to-use all-purpose joint compound for filling plasterboard joints and complete skim coating of different types of substrates. Application: • For filling and finishing joints between gypsum boards - Levels Q1-Q2 • Surface finishing of gypsum boards and common surfaces – Levels Q3-Q4 • Application in premises with normal humidity Advantages: • Premixed and ready to use right out of the container • Lightweight formula for easy application and great coverage • Can be diluted with water • Suitable for manual or machine application TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Plastic pail: 20 kg • Consumption for joint filling: ~ 0.35 kg/m² • Coverage for joint filling: ~ 66 m²/ 20 kg • Consumption for skim coating: ~ 0.50 kg/m² • Coverage for skim coating: ~ 40 m²/ 20 kg • Pails per pallet: 33 pcs • Pallet weight: 660 kg

Moisture resistant plasterboard Type H2 is made of special paper and gypsum core with water-repellent (hydrophobic) additives for protection against moisture. Application: • Ceiling • Walls • Areas with high levels of relative humidity, such as domestic kitchens, bathrooms, laundry rooms, etc. Ideal for indoor use in areas with increased humidity up to 70% for short periods of time Advantages: • Increased moisture resistance Type H2 • Sustains a healthy, moisture-controlled environment TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000 - 3000 8.80 60 pcs 15 1200 2000 13.00 50 pcs

FUGA HYDRO is a moisture resistant joint filler for manual skim coating and jointing with a joint tape of plasterboards in premises with high humidity. Application: • For filling and finishing joints between Moisture resistant plasterboard types H2, DFH2, Titan Board, or Blue Board • Suitable for complete skim coating • Application in premises with increased humidity Advantages: • High level of smoothness and smoothness of joints • Provides strong and durable bond between boards • Limited shrinking during storage TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Paper bag: 5 kg • Mixing Ratio: ~2.8 l water / 5 kg • Coverage: ~ 16 m2 / 5 kg • Consumption: ~ 0.3 kg / m2 • Bond strength: 0.3 MPa • Bags per pallet: 120 pcs • Pallet weight: 600kg