FLOW-TRONIC - Manufacturer Wastewater flow meters

The RAVEN-EYE is the new non-contact RADAR area/velocity flow meter for open channel flow measurements. It combines state of the art non-contact measuring technology which measures flow from above the water surface with easy integration into existing SCADA or telemetry systems. Radar A/V flow sensors have been in use for many years, so why is the RAVEN-EYE so revolutionary? Using the latest design, development and production methods, has allowed Flow-Tronic to manufacture a high quality new generation radar sensor at a price that will make it your first choice for open channel and sewer flow measurement, but affordability is only one of the RAVEN-EYE’s benefits. The name was not chosen at random, like the bird, the RAVEN-EYE has 3 key attributes: Intelligence, Adaptability, Survivability. Key Features: Accurate flow measurement Cost-effective Portable or stationary version available Non-contact No maintenance For more information: please visit www.raven-eye.eu

The BELUGA is an ultrasonic Doppler area/velocity flow meter sensor for open channel flow measurements from Flow-Tronic. The BELUGA combines most advanced utrasonic Doppler velocity sensing with most modern and powerful digital DSP processor technology resulting in more representative velocity data. This advanced architecture of the BELUGA provides users desiring in-depth analysis with: Real-time spectral analysis of the velocity distribution through the cross-sectional area Measurement validation through quality parameters Auto-diagnostic tools Combine the BELUGA with an IFQ MONITOR for stationary flow monitoring or with an IFQ LOGGER for portable/temporary flow monitoring. KEY FEATURES: Improved accuracy due to digital spectral analysis of the velocity distribution Easy integration with existing SCADA or telemetry systems Embedded RS485 communication port with Modbus ASCII protocol Straight 4-20 mA output for velocity ERTACETAL outer shell with epoxy potting wi

The EMV-500 is a water/wastewater electromagnetic velocity open channel flowmeter sensor which is available in two sizes: SIZE A is suited for pipes or channels from 150 mm to 500 mm diameter SIZE B is suited for pipes or channels from 500 mm to 2.000 mm diameter. The sensor is encapsulated in an IP68 submersible ultra high molecular polyethylene body to be mounted with a special sensor mounting band in the pipe. When combined with the appropriate level sensor, the EMV-500 constitutes an efficient electromagnetic area/velocity flowmeter measuring both velocity and level in the same cross-section (or slice of pipe). This is a requirement necessary for accurate flow rate measurement using the continuity equation: Q = v x A In addition, electromagnetic sensors are totally unaffected by the concentration of debris or dilution of wastewater by rain. Key Features: Accurate flow measurements Grease tolerant: Grease shedding electrodes allow for reliable data collection

The IFQ MONITOR is an easy to use and configure monitor and converter for Flow-Tronic flow sensors. It disposes of one RS485 digital serial communication port with specific protocols for RAVEN-EYE or BELUGA flow sensors and one 4-20 mA input for external level. The IFQ MONITOR is the easiest way to integrate an open channel flow sensor from Flow-Tronic to a local station. KEY FEATURES: User friendly interface Wide range of languages available: English, German, French, Russian, etc. 1 x RS485 digital sensor interface for RAVEN-EYE or BELUGA 1 x analog input 4-20 mA for external level 3 x analog output 4-20 mA for flow, velocity & level 1 x contact closure output for total flow 1 x normally closed relay output for alarm Logger (optional): 2 Gb flash memory (SD card) USB communication port (optional) GPRS/3G (optional) 7 position sealed membrane keypad 144x32 pixel white on blue graphical display

The IFQ LOGGER is a portable converter and logger for Flow-Tronic flow sensors. It disposes of one RS485 digital serial communication port with specific communication protocols for RAVEN-EYE or BELUGA flow sensors and one 4-20 mA input for external level. The IFQ LOGGER combines high performance with low power requirements. The unit needs 12 VDC nominal power supply either provided from an optional battery pack or solar panels. The IFQ LOGGER keeps the same easy configuration enhanced by the IFQ MONITOR and stays in line with the flexible and modular architecture launched by the RAVEN-EYE. All flow sensors are field interchangeable. A dry contact output is available for users needing an output for samplers or any other instrument. KEY FEATURES: 1 x RS485 digital sensor interface for velocity (RAVEN-EYE or BELUGA) 1 x 4-20 mA analog input for level sensor 7 position sealed membrane keypad 2 Gb memory (SD card) Power supply : 9 to 18 VDC Enclosure: PPC (IP67)

The Flo-Sonic OCFM is a permanent measurement system for open channel applications using the ultrasonic transit time technology. It is designed to suit a large range of applications for clean to polluted water with very different flow conditions. The Flo-Sonic OCFM sensors are designed to be installed in channels and rivers with various shapes and dimensions with a maximum width of 15 m for clean water applications. The Flo-Sonic OCFM system consists of one or more Flo-Sonic ultrasonic speed processors associated to one UNI-TRANS flow processor and monitor and two Flo-Sonic probes per path. Very complex applications can be equipped with up to 16 measurement paths. The Flo-Sonic OCFM uses the very latest electronic technology combined with highly efficient digital signal processing (D.S.P). The D.S.P. technique maximizes the system performance giving the user significant benefits.

The RTQ-2000 is a revolutionary device connecting directly to the Open Channel Non-Contact RAVEN-EYE Radar Velocity flow sensor. The RTQ-2000 has the capacity of transmitting the flow data, raw level, velocity, temperature from most manholes without special manhole cover into the Internet using GPRS data communication technology. Data is available for visualization and download in Excel format from any Internet browser. SMS (option) and E-mail alarming are possible. Automatic Data transfer to an existing data base is possible using XPATH module. Key Features: GPRS Data Transmission directly from the manhole to the 123flow.com platform The 123flow.com platform allows to view the data, build personalized graphics and manage all measurement locations Remote firmware update Remote measuring site configuration Li-Ion rechargeable batteries It transmits the data from most manholes without modifying the manhole cover

Stationary AC or DC powered converter for full pipe flowmeter sensors The ML210 is a stationary converter for full pipe sensors. It is either AC or DC powered. The ML210 is suited for connection to the following sensors for full pipe measurements: AVI-MAG (Multi-Mag for Russia or CIS-countries) SPI-Mag 1” & 2” Flo-Pipe Model FP180 & Model FP181 SEWER-MAG MAG-METER MS1000 & MS2500 When combined with one of the above mentioned sensors the ML210 with its 4-20 mA and contact closure outputs becomes a powerful full pipe flowmeter and data reporting system. The ML210 provides users with a reliable solution for full pipe stationary flow monitoring applications. The standard model includes: an IP67 enclosure; a 3-key numerical key pad; a graphical backlit LCD display, 100-265 VAC or 10-36 VDC power supply, 1 0/4-20 mA output and 2 Pulses/Alarm outputs.

The AVI-MAG (or MULTI-MAG for Russia & CIS-countries) is a hot tap full profile electromagnetic insertion flow meter. Multiple electrodes placed across the entire sensor body at equal area, measure and report the average flow rate over the full diameter of the pipe. The specific design of the multi-electrode sensor compensates for variable flow profiles, including swirl and turbulent conditions and allows installation without calibration on site. The AVI-MAG can be installed without shutting down, emptying or cutting the pipe (hot tap installation). It does not require welding flanges and installation can be done in pressurized pipelines up to 16 bar. Cost of installation is largely reduced by eliminating the need for heavy equipment (cranes, etc.) or extensive manpower. The AVI-MAG is the most economical flow metering solution for medium and large pipe sensor sizes, reducing drastically installation costs.