FORTEZA - Manufacturer of security alarm systems for perimeter protection of different objects

FM-42(24) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-42(24) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-42(24) have 5 frequency letters.

FM-60(24) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60(24) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60(24) have 5 frequency letters.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: bistatic microwave and bistatic infrared. Combination of two detection principles (Microwave and Infraredbeam) makes protection more effectively. An alarm is generated by crossing two detection channels at the same time. The sensors performance is the most effective on direct perimeter sectors requiring extra narrow detection zone, for example, if the sensors are installed by the top of the fence, in corridors, in areas near side-walks and roads, etc. The essential advantage of the sensors is the high interference immunity. The sensors have USB and RS-485 interfaces for work with special software. The software make it easy to start up the sensors and assures correct configuration of parameters. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: bistatic microwave and bistatic infrared. Combination of two detection principles (Microwave and Infraredbeam) makes protection more effectively. An alarm is generated by crossing two detection channels at the same time. The sensors performance is the most effective on direct perimeter sectors requiring extra narrow detection zone, for example, if the sensors are installed by the top of the fence, in corridors, in areas near side-walks and roads, etc. The essential advantage of the sensors is the high interference immunity. The sensors have USB and RS-485 interfaces for work with special software. The software make it easy to start up the sensors and assures correct configuration of parameters. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: bistatic microwave and bistatic infrared. Combination of two detection principles (Microwave and Infraredbeam) makes protection more effectively. An alarm is generated by crossing two detection channels at the same time. The sensors performance is the most effective on direct perimeter sectors requiring extra narrow detection zone, for example, if the sensors are installed by the top of the fence, in corridors, in areas near side-walks and roads, etc. The essential advantage of the sensors is the high interference immunity. The sensors have USB and RS-485 interfaces for work with special software. The software make it easy to start up the sensors and assures correct configuration of parameters. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: monostatic microwave and monostatic infrared. We use the sensor FM-30 for microwave channel of MIR sensors. That is why all the advantages and features of FM are appropriate to MIR sensors, especially: - the sensors detection zone is divided into sub zones, every sub zone can be configured separately, any sub zone can be disconnected to make secured passages for people or transport through gates. - using of special software via USB or RS-485 interfaces allows to configure correctly the sensor in-field as well as remotely from the guard room. - the sensors have 5 frequency letters allowing to install and operate them near each other. The sensors MIR-M30 have beam-shaped detection zone, that is why we recommend to use them for the protection of "frontiers".

Microwave bistatic sensors FORTEZA-FONAR are mounted into park lamps and combine protection and lighting functions. The sensors are intended for the protection of administrative buildings, park territories, office buildings, villas and other objects with high requirements for the territory appearance or secrecy of the alarm system. The sensors function as the alarm devices and decorative lamp. The lights can be switched on or off automatically or manually. The housing of one sensor can contain one or two receivers (or transmitters). Like this we decrease the number of devices on the territory and mounting works. Several frequency letters of the sensors allow for the sensors to operate near each other. It is possible to produce upon request the sensors FORTEZA-FONAR with a radio channel for wireless transmission of an alarm signal to a centralized monitoring console.

FORTEZA-1000 is a quickly deployable intrusion detection system intended for temporary protection of sites, small perimeters and perimeter sectors. The system can be used for protection of VIP aircrafts, critical cargo, precious machines, night parkings, military and medical camps, building facilities as well as for Border Service to detect the movement of criminal groups. Operational frequency 2,45 GHz NO DEAD ZONES NO MUTUAL INTERFERENCE OF ADJACENT SETS

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects.

The vibration sensors VIBRO-MG are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-MG are intended for detection of destruction of physical fences. The vibration sensor VIBRO-MG used for the protection of sewers, storm drains and other fences temporary flooded. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. VIBRO-MG keeps its specifications under water jets or during temporary flood.