Netherlands
Manufacturer/ Producer
Netherlands
Features Energy-saving industrial humidification systems with pneumatic spray nozzles producing Dry Fog**. With world-leading technology, our AKIMist® “E” produces ultra-fine “non-wetting” Dry Fog, which doesn’t wet the objects it touches. Prevents dryness and static electricity, enabling higher manufactured product quality and lower defect rates. The running cost is one-fifth of a comparable steam humidification system. For spaying chemical solution, chemical-resistant AKIMist® “E” TN is available. *1) Spray volume per one AKIMist® “E” with nozzle type 03C. AKIMist® “E” with nozzle type 03B: 3.3–13.2 ℓ/hr, nozzle type 04E: 3.0–12.0 ℓ/hr *2) Sauter mean droplet diameter of AKIMist® “E” with nozzle type 03C. AKIMist® “E” with nozzle type 03B: 12 μm, nozzle type 04E: 10 μm *3) Air consumption of AKIMist® “E” with nozzle type 03C and 03B. AKIMist® “E” with nozzle type 04E: 36–144 ℓ/min,...
Request for a quoteNetherlands
Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. Applications Cleaning: Automotive, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection, heat protection, dust suppression, deodorization
Request for a quoteNetherlands
Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Quick-detachable design helps to greatly reduce maintenance time. Easy mounting/dismounting with a knurled tab. No falling off of tip or packing when removing the nozzle part. [INVV series (plastic)] Made of high chemical and heat resistant PP (polypropylene). Nozzle tips are color-coded by spray capacity for easy identification. Applications [INVV series (plastic)] Cleaning Etching Stripping For the applications where precise spray alignment and/or periodic maintenance is required
Request for a quoteNetherlands
Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Easy installation just by drilling a hole (φ14.3 mm) on a pipe and inserting a nozzle. Easy assemble and maintenance by quick detachable nozzles. Adaptors, color-coded by size, are available in 1″, 1 “, 1 “, 2”, 25A, and 30A. Spray tips are also color-coded by spray capacity for easy identification. Adjust spray direction within 50 degrees as desired. Applications Pre-treatment for painting: Car, home electric appliances Cleaning: water rinsing after acid treatment of steel plates, water rinsing process in food factory
Request for a quoteNetherlands
Features Flat spray pattern with uniform distribution throughout pattern area. Even spray impact across the entire spray area. Applications Cleaning: Automotive, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection, heat protection, dust suppression, deodorization
Request for a quoteNetherlands
Features Flat spray pattern with uniform distribution throughout pattern area. Small 1/8 pipe connection size for high pressure cleaning. Applications High pressure cleaning: Automotive, containers, tanks, wire and felt parts of paper making machines, wire cylinders, filter presses, other industrial cleaning and degreasing
Request for a quoteNetherlands
Features Flat spray nozzles specially designed for descaling. Produces razor-like thin, sharp stream with even spray distribution and high spray impact. TDSS series, with much higher spray impact, increases erosion depth by 20% compared to the conventional model. Water-saving. Applications Descaling: rolling process in steelmaking
Request for a quoteNetherlands
Features Capable of generating wide-angle flat spray even at low liquid pressure. Clog-resistant Spray direction is 75° to the nozzle axis. Applications Cleaning: Conveyor belts, film, eliminator plates, plate glass, planks Foam breaking: Wastewater treatment, paper manufacturers Cooling: Conveyor belts, roofs, tanks Water screen: Fire protection, heat protection, deodorization
Request for a quoteNetherlands
Features Flat spray nozzles for detergent spraying. Generates large amounts of foam, air suction is driven only by liquid pressure. No compressor is necessary. Cleaning effect is improved due to the long residence time of the foam. *Spray angle of 80° – 100° is for reference only, measured when spraying 100 times diluted commercial dishwasher detergent. Applications Washing outer surface of vehicles Cleaning of conveyors in food industry
Request for a quoteNetherlands
Features Ultra-small capacity hollow cone spray nozzle with the finest atomization among hydraulic nozzles. Capable of generating extremely fine spray. The whirl chamber is formed by a ceramic orifice and closer, which provides excellent wear resistance. Applications Humidifying: Air handling units, green houses Cooling: Gas, thin plates, poultry Spraying: Alcohol, chemicals
Request for a quoteManufacturer/ Producer
Merwedeweg 6
3621 LR Breukelen - Netherlands
Germany
The nozzle consists of two counter-rotating nozzle housings into which the nozzle tubes are inserted with a connection for screw-in round jet nozzles. A special packing sealing system inside the nozzle housings ensures protection during operation and prevents the ingress of contaminants. In front of and behind the nozzle housings are spacers (basket system) to prevent the nozzle tubes from hitting the well wall. In addition, for best cleaning results, the temperature of the medium should be between 3 and 30°C.
Request for a quoteGermany
Optimum surface cleaning with KAMAT high-pressure rotating nozzles In order to ensure a surface treatment with excellent results and within a reasonable time, we have developed special externally driven rotating nozzles suitable for our high pressure pumps: Depending on the customer's requirements, our nozzles can be driven pneumatically, electrically or hydraulically. With traditional, self-powered rotating nozzles, the water jet hits an angle before it exits the nozzle, causing the nozzle to rotate. Driving the rotating nozzle causes the water jet to lose energy and is therefore much less efficient. Our externally driven rotary nozzles concentrate the hydraulic energy entirely on the machining process. KAMAT rotating nozzles provide coherent jets that can be moved precisely and quickly over large areas. In the case of externally driven rotation, the hydraulic energy is used entirely on the surface being sprayed, giving excellent and efficient results on surfaces.
Request for a quoteTurkey
0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)
Request for a quoteTurkey
0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)
Request for a quoteCreate one request and get multiple quotes form verified suppliers.