Germany
Manufacturer/ Producer
Germany
Features ■ Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids ■ Stainless steel case in sturdy design, degree of protection IP 65/67 ■ Accuracy 0.1 % ■ High-resolution graphic display with Intuitive 4-button operation and backlight ■ Comprehensive parameterising and simulation and diagnostic functions ■ Nominal range 0.25 bar to 400 bar ■ Turndown up to 100:1 ■ Measuring rate up to 100 Hz ■ Output signal 4…20 mA with HART® protocol ■ Digital communication via PDM, FDT/DTM, 375/475 Field Communicator ■ Output functions: linear, invers, square root, table function ■ Media temperature -40…100 °C ■ Wetted parts stainless steel ■ Case design: process connection bottom or back ■ Process connections: various screw-in thread with internal diaphragm ■ Approved according to NAMUR 95 Options ■ Explosion protection; SIL2; material certificate and calibration certificate per EN 10204 ■ Degree of protection IP 69K
Request for a quoteGermany
Features ■ Differential pressure transmitter with metallic diaphragm ■ Function modules: Multifunctional display; Switching module with 2 floating channels; HART® module ■ Function module replacement on site without recalibration, „plug and measure“ ■ Nominal ranges 0.4 up to 40 bar ■ Turndown 5:1 ■ Accuracy ≤ 0,15 % ■ Output signal: 4…20 mA; alternative with PROFIBUS PA ■ Output functions: linear, invers, table function ■ Stainless steel case in sturdy design, degree of protection IP 69K ■ Media temperature -40...100 °C ■ Wetted parts stainless steel ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate and calibration certificate as per EN 10204-3.1 - Classification per SIL2
Request for a quoteGermany
Temperature measuring transmitter for hygienic surface temperature measurement using clamp-on technology, for pipes with a diameter of 4 ... 300 mm and for tanks. For non-invasive temperature measurement High-resolution graphic display with intuitive user interface and background lighting Accuracy of 0.1% of the set measuring range Quick set-up function Measuring resistance Pt100 Process connection bottom or back According to 3A requirements Various clamping elements for process connection Temperature range -40 … 150 °C
Request for a quoteGermany
MiniTherm GV4730 temperature transmitter hygienic design ◼Compact stainless steel case ◼Temperature measuring transmitter for installation in a separate thermowell in hygienic design ◼Temperature range -50 … 200 °C ◼Measuring insert, spring loaded ◼Compact, small design ◼High-resolution graphic display with intuitive user interface and background lighting ◼Accuracy of 0.1% of the set measuring range ◼Quick set-up function ◼Measuring resistance Pt100 ◼Process connection bottom or back ◼According to 3A requirements
Request for a quoteGermany
Features ■ Pressure transmitter with on-site indication for relative pressure measurements ■ Safety pattern gauge S3 per EN 837-1, NS 100 and 160 alternative high quality case with bajonet ring per EN 837-1 S1 ■ Nominal range 0…0.6 bar up to 1000 bar ■ Output signal: 4…20 mA (20…4 mA) 2-wire technology ■ Integrated angle-of-rotation sensor, not subject to wear ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Calibration certificate - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate as per EN 10204-3.1 ■ The electrical zero can be corrected by holding a ferromagnetic object to a marked location on the case ■ Additional switch function ■ Diaphragm seals see product group D5 ■ Output signal 0...20 mA and 0...10 V in 3-wire technology (for devices without Ex-protection and without zero point setting)
Request for a quoteGermany
The resistance thermometer is suited for operation on tanks and pipings especially in hygienic applications. All standard types of process connections are available. Because of its robust design it is suitable for use in a great number of technological processes. The change in resistance, dependant on the measurement temperature, can be detected by a transmitter and converted into a standardized signal. A variety of transmitters for head mounting is available for different applications. For In-process calibration the integration of a special measuriung insert with additional test pipe is possible (data sheet T4-025-45,Type GA3100, reference sensor: data sheet T4-025-46, Type GA3110).
Request for a quoteGermany
Differential pressure and level transmitter PASCAL Ci4 Delta P, highly overload protected Features - Differential pressure transmitter with diaphragm seal - Simultaneous display of differential pressure and static pressure - Reference accuracy 0.07 % - Long-term stability 0,1 % within 5 years - Nominal ranges 100 mbar to 16 bar - Turndown up to 100:1 - Stainless steel case in sturdy design, degree of protection IP 65/67 - High-resolution display with intuitive 4-button operation and backlight - Comprehensive parameterising functions - Comprehensive simulation and diagnostic functions - Quick access to device data - Development according to SIL2 - Maximum working pressure 160 bar - Measuring rate up to 50 Hz - Output signal 4…20 mA with HART® protocol - Media temperature -90…400 °C - Configuration memory - Digital communication via PDM, FDT/DTM, 375/475 Field Communicator - Output functions: linear, invers, square root, table function - Wetted parts stainless steel
Request for a quoteGermany
The resistance thermometer with weld-in thermowell is suited for operation on tanks and pipes. Weld-in thermowells per DIN 43772 model 4 or custom-made versions are available. Because of its robust design it is suitable for use in a great number of technological processes. The resistance thermometer can be supplied with a built in transmitter. A variety of transmitters for head mounting is available for different applications.
Request for a quoteGermany
Modulare differential pressure transmitter with metallic diaphragm; with function modules replacement on site without recalibration, „plug and measure“. Features: Nominal ranges 0.4 up to 40 bar Turndown 5:1 Accuracy ≤ 0,15 % Output signal: – 4…20 mA – alternative with PROFIBUS PA Output functions: linear, invers, table function with up to 31 support points Stainless steel case in sturdy design, degree of protec-tion IP 69K Media temperature -40…100 °C Wetted parts stainless steel EAC declaration (upon request) Approvals/Certificates - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate as per EN 10204-3.1 - Calibration certificate as per EN 10204-3.1 - Classification per SIL2
Request for a quoteGermany
The temperature switch GP2610 in clamp-on technology is intended for measuring the surface temperature of pipes especially in food/pharmaceutical/biotechnology applications. The output signal is connected to a digital PLC I/O port. ■ Various clamping elements for process connection ■ Hygienic temperature measurement for pipe diameters of 4…300 mm ■ Measuring system patented ■ High accuracy, fast response ■ Easy installation ■ No welding, no process interruption ■ No additional isolation required ■ Measuring insert can be recalibrated ■ Temperature switch with output signal 4 or 33 mA, 2-wire technology ■ Switch point setting by using a magnet; range from -40 to +150 °C ■ Switching point accuracy ± 0,5 K ■ Switching delay: 0 sec ■ Hysteresis 0.1 K ■ Switch state indicator with 2 LEDs (green light) ■ Electrical connection M12
Request for a quoteManufacturer/ Producer
Im Gewerbepark 13
27798 Hude - Germany
France
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.).
Request for a quoteGermany
The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection
Request for a quoteFrance
The Cairsens© H₂S / CH₄S sensor allows specific pollutant measurement comparable to reference methods.
Request for a quoteFrance
CLD based gas monitor offering superior performances for the measurement of NO, NO2 and NOx criteria pollutants in the range 0-1 ppm or 0-10 ppm. Optional NH3 monitoring.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.