Luxembourg
Manufacturer/ Producer
Luxembourg
SISTO-SK-i LED Features ● Mounted onto linear actuator up to valve travel of 46 mm ● Continuous valve travel recording via microcontroller ● On-site initialising via magnet or remote initialisation via process control system ● Can be combined with mechanical travel stop ● Remote initialisation possible ● Optical status indication via high-visibility LED ● Electrical connection using 24V M12 plug(s), 8 pin ● Pneumatically connection: M5 internal thread ● Electronic position feedback open/closed ● Error output Variants ● Stainless steel housing ● Plastic housing ● With intergrated solenoid valve; 24V, Low: 0-3V, High: 14 – 24V ● AS-Interface field bus connection
Request for a quoteLuxembourg
SISTO-C ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN 6 – DN 200 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free
Request for a quoteLuxembourg
SISTO-C Pneumatically operated Valves Features ● Piston actuator ● Valve bonnet in compact design, actuator housing and valve bonnet manufactured out of one part ● Stainless steel stem ● Clear visual position indication by red plastic indicator – well visible all around ● Stainless steel compressor ● Floating nut ● Spring chamber venting by operation hole ● Spring to close – air to open ● Stainless steel spiral spring support for MD 65 and larger Variants ● Spring to open – air to close ● Air to open – air to close ● Two-stage-actuator ● High temperature design with FKM/FPM seal (Recommendation: >= 80 °C measured at actuator housing) Optionen / Options ● Limit switches ● Positioner ● Adjustable travel stop
Request for a quoteLuxembourg
SISTO-CBAV ● tank valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank, multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN150 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design
Request for a quoteLuxembourg
SISTO-C Manually operated Valves Diaphragm size 30 Features ● Plastic handwheel PA6GF30 ● Handwheel with recessed grip ● Integrated travel stop in close direction ● Stainless steel position indicator ● Rising handwheel ● Electropolished stainless steel bonnet ● Stainless steel compressor ● stainless steel stem ● Autoclavable ● Floating nut Options ● Stainless steel handwheel ● Limit switches ● Stem extension
Request for a quoteLuxembourg
SISTO-C Elastomer diaphragms bonded with TFM Manufactured in a specially developed process, these compo-site diaphragms are made of an FDA compatible EPDM rubber which is firmly bonded to a TFM film featuring improved mechanical properties and lower permeability compared with conventional PTFE. This material quality also complies with FDA specifications and the EU1935. The TFM’s excellent chemical and thermal properties make this diaphragm type the first choice for applications with chemically aggressive media and high temperatures. This diaphragm type is also recommended for use in media which need to be protected against rubber abrasion and fluids containing oils and greases. As the rubber is fully covered by the TFM sheet, even mechanical damage to the sheet does not result in cavity formation and therefore to undefined spaces which cannot be cleaned. This composite diaphragm is vacuum-resistant.
Request for a quoteLuxembourg
SISTO-CM210 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design
Request for a quoteLuxembourg
SISTO-C Elastomer diaphragms SISTO soft elastomers are made from an EPDM rubber which has been designed to withstand an operating temperature of up to 140°C. The diaphragm material corresponds to FDA requirements, EU1935 and has been tested and certified in accordance with USP guidelines. The diaphragms are well suited for use in “cold applications” such as in WFI systems, and thanks to their high ozone resistance they have proven extremely successful in CIP applications with all types of standard cleaning media. These EPDM diaphragms are also ideal for sterile steam applications. A piece of fabric integrated into the EPDM rubber enables the diaphragm to be used under vacuum. The diaphragms can easily handle solids-loaden fluids and have a long service life.
Request for a quoteLuxembourg
SISTO-CM409 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, therefore two components in contact with the fluid handled only: body and diaphragm ● Butt weld ends or clamped connection ● Body materials: forged stainless steel and other alloy materials ● Diaphragm materials: EPDM, TFM/EPDM bonded, TFM/EPDM 2-piece ● Available nominal diameters: DN6–DN100 ● Operating temperature: – 20°C to + 160°C ● Permissible operating pressure: vacuum up to 16 barg/ optional 20 barg Benefits: ● Suitable for applications up to a line pressure of 16 barg ● Increased operating reliability ● Self-draining ● No dead volume ● No contamination of fluid handled ● Suitable for CIP/SIP ● Maintenance-free ●Compact, space-saving design
Request for a quoteLuxembourg
SISTO-C Bonnets with piston actuator MD 168-202 Features ● Piston actuator ● Stainless steel actuator housing ● Stainless steel bonnet ● Stainless steel stem ● Clear visual position indication by red plastic indicator – well visible all around ● Stainless steel compressor ● Floating nut ● Spring chamber venting by operation hole ● Spring to close – air to open ● Stainless steel spiral spring support Variants ● Spring to open – air to Close ● Air to open – air to Close ● Aluminium hard anodised actuator housing ● High temperature design with FKM/FPM seal (Recommendation: >= 80 °C measured at actuator housing) Options ● Limit switches ● Positioner ● Adjustable travel stop
Request for a quoteManufacturer/ Producer
rue Martin Maas 18
6468 Echternach - Luxembourg
Germany
The flowmeter with touchscreen display and backlighting convinces with its demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Media examples: Paints, lacquers, mineral oils, acids, alkalis, mineral oils, solvents * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2
Request for a quoteGermany
The first flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Media examples: Paints, lacquers, mineral oils, acids, alkalis, mineral oils, solvents * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2
Request for a quoteFrance
The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission measurement. • continuous, precise and reliable dust quantity measurement (mg/m³) • dust measurement possible in large channel diameters • output of dust concentration as absolute value • ATEXcertified • measurement of dust concentration at high temperatures or harsh environments • trend signal or absolute value
Request for a quoteGermany
Easy to operate, compact and quick to install on all Drum and container pumps: The new Lutz Flow Meter TR3 in PP or PVDF. A handy meter you can "count" on in any situation. The symmetrical measuring chamber allows the meter to be used for all flow directions and measures thin-bodied, non-flammable media precisely, quickly and above all efficiently. * PP for neutral and aggressive media * Examples of media: Glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc. * Two 1.5 V batteries (AAA) replaceable Features & Advantages * Measurement according to the turbine wheel principle * Displaying the partial and total quantity * Variable display orientation * Mobile on a Drum pump or with a nozzle connection * Measuring range from 5 l/min - 120 l/min * Simple battery change
Request for a quoteCreate one request and get multiple quotes form verified suppliers.