Side-Grip Rinser

NP-WF Linear type Bottle Rinser by water is widely used for rinsing the new glass bottle and jars before filling. The rinsing can choose pure hot water or normal temperature purified water. The water after cleaning the bottles and recycling into the water tank for purify and heating again to reduce the water comsuption.The ultronic device is for option to meet the high requirement, Servo system bottle rinser Servo motor driven the bottle clamper to turn up 180 degree, the turning speed is frequency converter control. The rinse spary head are specially designed for different types of containers, ensure 100% rinsing the inside of the bottles. Rinsing head will insert into the container for cleaning. The machine is frequency speed control, change bottles no need additional changeover parts. A high pressure water pump and a water recyling pump ensure the rinse pressure and recyling water in time

DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.

The SC-10 rinser, consisting of a rotating table with intermittent movement at 10 positions, allows for the prevention of biological contamination in bottles and jars caused by the presence of dust, leaves, small insects, and the risk of serious incidents due to possible glass fragments inside the containers. It is possible to insert and remove bottles from the front position. The spray of rinse water or sanitizing solution occurs only when the bottle is present, thanks to a contact microswitch. For the use of a recirculating solution, a kit with a recovery tank, pump, and connecting pipes is available. The machine is equipped with a filter for the rinse solution with a 0.45-micron microfiltration cartridge. It is also available in a 20-position version and a blow-only mode. Production: 700 pieces per hour.