THERMOTEC PRODUKTIONSGESELLSCHAFT MBH

Germany

Factory icon Manufacturer/ Producer

THERMOTEC PRODUKTIONSGESELLSCHAFT MBH
Web icon

Germany

Verified by Europages

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape K    An absolute classic

Request for a quote

Germany

Verified by Europages

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape L    This plate heat exc

Request for a quote

Germany

Verified by Europages

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat no costs involved Shape U    This structural shape is especially qualified for small plate heat exchangers. This structural shape is although qualified for plate heat exchangers which should streamed vertically.

Request for a quote

Germany

Verified by Europages

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.     Shape LU  This structural s

Request for a quote

Thermotec GmbH is a company specialising in equipment and machine manufacturing. We are involved in the heat recovery sector in particular. We focus our development and manufacturing on plate heat exchangers for heat exchange between two gas flows. The production of three-way process air valves is another of our focal points. In addition to these main fields, we also develop, design and manufacture a whole series of other products. The production process uses virtually exclusively stainless steel, preferably in the materials 1.4301, 1.4306, 1.4541, 1.4571, but also in other stainless steel qualities. With our currently available production area of 1740 m², partially equipped with machines with CNC control, PC workstations, CAD drawing stations and quality assurance implemented in accordance with ISO 9001, we are always one step ahead of the competition.

Documents

Domain icon Manufacturer/ Producer

THERMOTEC PRODUKTIONSGESELLSCHAFT MBH

Westring 9C

27793 Wildeshausen - Germany

Contact

Company info

Key figures

  • Company headcount
    11 – 50

Organisation

  • Year established
    1987
  • Main activity
    Manufacturer/ Producer

Business info

Trading areas

  • Check Circle Outline icon International

Activities of THERMOTEC PRODUKTIONSGESELLSCHAFT MBH

  • Gas and oil - exploitation
  • Water - production and distribution
  • Industrial piping
  • Finishing work
  • Public works contractors
  • Energy and raw materials - services to industry
  • Pipeline construction
  • vaned-pipe heat exchangers
  • heat exchangers
  • Stainless steel exchanger