compressed air gun

...Innovative concept from PREVOST, the prevoS1 blowgun allows for optimal compressed air distribution. STRENGTHS: Ease and comfort of use, energy savings, performance, and long lifespan. Complementary to the prevoS1 compressed air fittings, the prevoS1 blowguns provide users with the ideal blowing tool for numerous applications. The prevoS1 blowguns come in various models of nozzles: metal, OSHA...

...Blow guns, blow-off valves, spray guns, professional cleaning guns, and special compressed air and liquid guns are all part of the RIEGLER product range, as well as hand tire inflators, hose clamps, sealing materials, and various supply units. With RIEGLER industrial adhesives, sprays, and sticks, you are always on the safe side.

...{"Capacity":"Installation of crimp nuts from M3 to M10 in all materials","Features":["Patented rational screwing and unscrewing system for threaded chuck – time-saving","The compressed air used for the installation operation is then utilized for the automatic unscrewing of the threaded chuck – cost-effective","Simple stroke adjustment – safe and complete installation of crimp nuts","Crimping...

...Operates on water pressure Works without electricity or compressed air • Connects to a tap and automatically dilutes a cleaning or disinfecting product with water. • Ideal for spraying cleaning products on cars, trucks, and other vehicles. • Comes with a stainless steel spray lance. Equipped with a flat jet nozzle. • The exact dilution is defined by the 14 calibrated color nozzles provided. You...

...BETAPRESS PL-3360 The BETAPRESS PL-3360 is a pneumatic dispensing gun for standard cartridges (Single 105 - 310 ml) and pouch bags up to 400 ml. This application device operates with a piston, which mechanically extrudes the material. This design prevents compressed air from entering the cartridge or pouch bag. Scope of delivery: • Gun • Compressed air connection for EAN: 4260534181026 pcs: 1...

...for shooting through capacitor tubes with outer diameters from 15.9 mm to 31.8 mm With the QS-300 model, compressed air pipe cleaning is faster and safer. This gun is equipped with state-of-the-art technology and represents the pinnacle of compressed air pipe cleaning technology. When the touch-sensitive trigger is activated, the pipe scraper or cleaning tool is shot through the capacitor tube...

... Features: • Pneumatic • Mixing ratio 1:1 • Accurate dosing of the adhesive mixture possible • Adjustable pressure during application (regulation from 1 to 6 bar possible) • No material run-off due to a specially designed quick-release system at the back of the gun • A forward-facing quick-release protects the user from excess compressed air • The special indicator rod shows the remaining amount of product in the cartridge...

...DKS 310 Air Pressure Gun...

...For widespread application For stubborn contaminants Very efficient CO2 snow particle generation Gentle dosing into the compressed air For manual blasting work Adaptable to all robots No ice formation due to thermal insulation With CO2 quantity regulator...

...Cartridge press, compressed air, 310 or 400 ml cartridges or bags, from 1 piece - Professional quality with anodized aluminum tube - Optimal center of gravity - Minimal air consumption - Working pressure 6-10 bar - Quick pressure release valve - For cartridges and bags up to 400 ml...

...MS80 - MANUAL GLUE GUN WITH GRANULAR HOT MELTS The MS 80 glue gun works with granular hot melts without compressed air. Simply connect them to the socket – ready. Use the thermostatic controls to set the requested temperature between 20°C and 200°C and you always work with the optimum glue temperature. Pull the trigger to apply the melted granulate. The MS 80 has proven successful in practice...

...Spray Coating In spray coating, high-quality industrial paints are atomized using a spray gun and compressed air (2 to 6 bar) as they exit a nozzle. This method is used for small and flat parts. However, it has the disadvantage that paint loss (overspray) is relatively high. This method remains the most common technique for workpiece coating and offers not only good corrosion protection but also...

... through the use of giglers, utilizing an external supply of compressed air to generate quality foam in a simple and intuitive manner. In addition to foam application, this equipment also allows for the rinsing of the venturi, thus preventing clogs from occurring. Code: CT.VTD15E Adjustable Dosage: 0.85 to 9.2% Flow Rate Lt/Hr: 330 Water Temperature: 5 to 40º C Working Pressure: 2 to 4 bar Hose Length: 20 meters Type of Gun: LESAU001...

...The Bickers Exakt MS-250 is a professional high-performance industrial glue gun with a tank for granules and pillows. The Bickers Exakt MS-250 is a professional high-performance industrial glue gun with a tank for granules and pillows, featuring 600 watts of heating power and a temperature setting ranging from 20 °C to 200 °C. A unique aspect of this gun is that it does not require compressed...

... around the equipment from contamination while ensuring that all compressed air is directed into the channel, thus guaranteeing stronger pressure for better performance. Available in Small (5.8 mm – 30.2 mm) – Large (14 mm – 46 mm). Any type of industry where pipes need to be maintained under high pressure.

...Cleaning complex bending geometries is also possible. The chrome-plated gun made of high-strength aluminum is a durable tool, even in a harsh working environment. It can be conveniently hung up with a balancer for easy access. With its ergonomically shaped handle and a swivel air connection, the ptcsystem® gun is also suitable for cleaning small series.

...Thanks to the effective single-hose system, a very powerful jet can be generated, capable of removing even the most stubborn dirt. With the new series, you can choose the right device for an air volume range of 1 m³ – 20 m³ and an air pressure of 3 to a maximum of 20 bar. Control and regulation at the device: - Compressed air remote control at the blasting gun - Automatic ice feed at compressed air...

... ions) occurs until the charges on the surface of the material are neutralized. The use of compressed air allows the ionic field emitted by the tips to be conveyed over a greater distance and to dust off the treated surface. 3 ionization tips are embedded in a Teflon block installed in an anodized aluminum profile. A quick connector with a diameter of 8 mm ensures the pneumatic supply of the...

...Water-based, optionally opaque or translucent pigmented wood coating. The product is characterized by excellent weather resistance, good block resistance, and very good workability. It is optimized for application with airless or compressed air spray equipment. Lignovit Spray-Ready NG W10 Base for Tinting Special Properties The coating is protected against blue stain and mold infestation by a...

... in quality assurance. Scope of delivery: Eltex ionization power supply Ionization blow gun with compact nozzle Filter regulator for up to 6 bar Compressed air hose to connect the filter regulator and the blow gun Carrying frame with rubber feet...

... been around for over 100 years and has unparalleled experience in developing nailers. A pneumatic nailer, as the name suggests, operates on compressed air. We also refer to it as a pneumatic stapler. We primarily supply nailers for professionals, and they are most commonly used in various woodworking and wood processing industries. - For more information, visit: https://contimeta.com/nl...

...Minimum pressure 6.0 BAR / MAXIMUM 8.0 BAR. Technical sheet provided with each delivered device. INSTRUCTION MANUAL FOR DPDA Connect the neutral gas (or filtered compressed air) hose to the drain gun fitting. Constant operating pressure MINIMUM 6 BAR / MAXIMUM 8 BAR. Bottles to be drained must be in a rack or other packaging placed on the ground. Never drain an UNPACKAGED bottle in a rack or...

...The Short 110 model is one of the most well-known devices among users. It consists of a special pressure-fed spray painting device that operates using the compressor it is equipped with, which pressurizes (max 3 Bar) the tank from which the product is drawn. As the material reaches the airbrush, it mixes with the compressed air, also supplied by the compressor, at the nozzle to optimally atomize...

...The compressed air grease gun 1162 is designed for lubrication with grease up to NLGI class 2. Model 1162 – Flexible lubrication attachment • Self-regulating pneumatic drive • Metal construction press. • Chrome-plated container. • Hydraulic nozzle with check valve. (3-jaw coupling for cone grease nipples) • 3 filling options with 400g cartridge, filling pump, or loose grease Length: 460 mm...

...Our latest tool for use during the maintenance of hydraulic and other industrial equipment. Small (5.8mm - 30.2mm) Large (14mm - 46mm) Resistance to most oils and chemicals Temperature range from -25°C up to 90°C Does not shrink, leak or discolor Resistant to sunlight for greater shelf life Does not split/crack or deteriorate Easy to use. Insert, squeeze, press home and apply air-gun The compressed rubber ensures a tight fit...

... apply air-gun The compressed rubber ensures a tight fit By using the plugtite rubber nozzle adaptor in conjunction with an air gun it prevents splash-back of any oils, chemicals, liquids, or other debris from the channel /tube/pipe whilst cleaning under high pressure, thereby protecting both the user and the environment in and around the equipment from contamination, and, at the same time ensures that all the air pressure is directed into the channel ensuring a stronger pressure for improved performance.

...The AG-01 antistatic gun, shockproof, is a compressed air gun equipped with an ion emitter nozzle. This means that the airflow generated when the trigger is pressed becomes ionized, allowing it to eliminate charges present on the surfaces it is directed at. With this type of design, the AG-01 gun is much more effective compared to guns with internal ionization, as well as being very handy and ergonomic. The AG-01 gun comes with a high-voltage cable available in various lengths, which must be connected to a power supply.

...Manufactured under license from Michelin. Operating pressure: from 0.7 to 12 bars maximum Compatible with nitrogen inflation Delivered with a calibration certificate To be supplied with filtered and non-lubricated compressed air 1.5m hose for standard valves. 1/4" threaded inlet To check the accuracy of the guns in use in the workshop, compare their inflation pressure against a new "reference" gun that will only be used for this purpose. The date to consider for metrological tracking is the date of commissioning and not the date of manufacture.

...-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 450 mm Rapid traverse XY Z axis 60,000mm/min 2 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm Spindle distance 450mm Chip conveyor Knoll (scratch belt conveyor in positioning variant across the machine) High-quality Knoll KSS system with fine filtration Flush gun Complete enclosure Tool storage (2 x 50 tools) Operating voltage 400V 3N ~ Control voltage 24V DC Connection value machine approx. 72 KVA Compressed air connection 6 bar...

...Reference: 1BVP2200 Applications THE SUCTION BLOWER: directly connected to the compressed air network, the guns blow or suck. No moving parts, no electricity, no breakdowns, minimal maintenance.