Results for

Cable test equipment - Germany

89 Companies

8 Products

SCHÜTZ GMBH MESSTECHNIK

Germany

Schütz Messtechnik is an experienced and qualified company that has been operating as a service provider and an equipment manufacturer for energy companies since 1968. In the amenities industry, Schütz checks the public gas pipeline networks in accordance with the regulations G 465, G 466/I and G 466/II of the German association for gas and water (DVGW), carries out leak and pipeline detection and exchanges meters. In addition, it holds technical seminars and training sessions for employees from utility companies. Schütz GmbH has been certified by the DVGW as a company specialising in checking gas pipelines. Energy companies using a geographic information system (GIS) can check their pipeline network with Schütz's digital technology. Among Schütz GmbH's client base today are more than 100 municipal utility companies, with whom the company maintains long-standing, close and trusting business relations.

All the products for "cable test equipment"

Car Support with Charging Cable for Gas Pens

Extraction Valve

Test Gas Set for Gas Pens

Test Gases

Test Station PS 403-US

Website See all products
FLEXTEC GMBH

Germany

flextec GmbH is a medium-sized company that was founded in 2005 by today's shareholder and director Alexander Fritz. It was a logical further development that emerged from the success of Fritz Elektronik e.K., which had already existed since 1996. In the field of electrical engineering and electronic equipment, we have specialised in the development and manufacture of customer-specific products as custom production/prototypes or small batches, complemented by the associated services. Specifically, the flextec range currently includes: Customer-specific manufacture of cables and cable harnesses, laying out and fitting printed circuit boards (SMD, classic), development of hardware and software for electrical and electronic test equipment, construction and manufacture of mechanical devices incl. housing, manufacture of customer-specific electrical measuring equipment.

Website
WEINLICH GMBH & CO. KG

Germany

Our company emerged from a service contract between Schnellpressenfabrik Heidelberg AG (now Heidelberger Druckmaschinen AG) and Leopold Weinlich, tasking him with the development of a numerical control with which he set up his own business in 1963. Today, we primarily produce modular equipment for testing engines, which can be operated easily and safely – thanks in no small part to the control devices. Our products: - Engine test benches (braking dynamometers), - control and measuring technology for transportable engine test benches, - reusable engine supports for operating engines on test benches or at no load, - set-up and preparation of engines for testing, - modernisation of dynamometers, - basis for torque testing, - bullet velocity meters for safe measurement of exit speeds on firearms, special designs for material testing, - methods for winding up cables.

All the products for "cable test equipment"

Control and measuring technology for engine test beds

Thermal Balance

Fuel consumption metering device

VM velocity meter for flying objects / Bullet velocity meter

Engine Test Beds in Containers

See all products
WALTHER TROWAL GMBH&CO.KG

Germany

Since 1931 Walther Trowal has been developing and producing systems for the refinement of surfaces. Initially focusing exclusively on mass finishing – the term “Trowalizing” originated from the company’s cable address “Trommel Walther” – Walther Trowal has continuously expanded its product portfolio. Over time the company has developed a broad range of machinery and systems for mass finishing, shot blasting and coating of mass produced small components. With the invention of new systems like, for example, drag finishing and the development of special finishing methods for 3D printed components, the company has proven its innovative capabilities again and again. Trowal develops and implements complete surface treatment solutions that can be seamlessly integrated into linked production systems existing at the customers. This includes the entire process technology, perfectly adapted to the specific surface finishing requirements of the work pieces: Equipment and the respective consumables always complement each other in a perfect manner. Each individual work piece and each manufacturing process must meet special technical requirements. That is why the experienced process engineers in our test lab, in close cooperation with the customers, develop the optimal process technology for the finishing task at hand. The result: Work piece surfaces that meet exactly the required specification with short processing times and a high degree of consistent, repeatable results.

See all products
ASMUS GMBH

Germany

Asmus GmbH is a medium-sized company that concerns itself with the development, hire, sale and servicing of cable-guided lifting equipment and work platforms. Rotor blade service platforms and special designs for the scaffold-free installation of lift systems are additional areas that we specialise in. Asmus access systems can be supplied all over the world and can be rented out for full use by our customers within the EU without any issues. Hire of equipment outside of the EU is considered on a case-by-case basis and is dependent on the applicable customs regulations as well as the import and export regulations of the respective non-EU country. Asmus access systems are type-tested or TÜV-inspected in accordance with EN1808 and can be made to be highly flexible by means of special construction and individual manufacturing. Our certified trainers offer applicable product training sessions and instruction in how to handle the platforms, which can be provided at our head office or at our customers' locations around the world. We uphold the "Made in Germany" quality seal with pride!

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

KANALKABEL.DE

Germany

B2B online shop for fast, cost-effective and high-quality cable replacement for all popular CCTV camera, drain robotic and renovation systems. We are glad to offer our Hradil replacement cables (sewer camera cables, push cables and robot cables) to very attractive prices. All Hradil replacement cables are available from stock - either in standard lengths or alternatively in required length - and on request be supplied complete with connector. Hradil replacement cables are independently tested and CE compliant. They meet the legal requirements on equipment and product safety and the working and operational protection.
SKYMEAR INDUSTRIAL LIMITED

Germany

We, Skymear Industrial Limited, have been engaged in the manufacturing and trading of aluminum truss, stage, tents and cable protectors for 10 years. Now we have been one of the leading suppliers of event solutions in China, with operations in 135 countries around the world, setting standards in quality, technology, handling, design and service. Our business have two parts, domestic sales and exporting. Our products have been exporting to around 135 countries , mainly in foreign markets, like North America, Australia, Europe, Mid-east, etc. For your safety, all our products are produced according to the strictest international standards, like TUV, SGS, CE. Our factory introduces advanced extrusion machine, drilling punching, forming and other equipment, the use of Taiwanese manufacturing process, establish a strict management system management, while the introduction of a number of advanced product testing equipment, the use of composite materials in the field of R & D and production tops the domestic industry leading products in the international market has been widely praised, the company with a number of world-renowned brand manufacturers and processing, the products are sold to Europe, North America, South America, Southeast Asia and other markets.
KURTH ELECTRONIC

Germany

KURTH ELECTRONIC is a leading manufacturer and provider of TEST and MEASUREMENT products for IT, TELECOMMUNICATIONS and ELECTRICAL INSTALLATIONS. Our customers are telecom service providers, carriers, distributors and technicians around the world. Our products are known for their high quality, reliability and affordability - each product is designed to allow the telecom technicians to do their jobs more quickly, with confidence and in safety. Simply said "MADE IN GERMANY".Our wide range of test and measurement equipments support applications like Copper Cable Testing, POTS and ISDN, ADSL, SHDSL, VDSL2 including vectoring and bonding, Ethernet and WLAN, GPON and Fiber Optics with outstanding feature sets.
QINHUANGDAO YUANCHEN HARDWARE CO.,LTD.

Germany

Yuanchen supply nonstandard metal stamping, sheet metal working, sheet metal fabrication, laser cutting service, safety glass testing equipment, metal bracket, sheet metal bending, sheet metal forming etc. Customized OEM service and Free Sample Confirmed. Qinhuangdao Yuanchen Hardware Co., Ltd. is special in metal processing and nonstandard metal parts. Products are widely used in: Auto Parts Indurtry Parts Electronic parts Machinery Parts Cosplay metal parts Construction Fittings Photovoltaic hardware Sports equipment parts Medical device metal parts Cosplay metal parts Glass inspection equipment OEM/ODM Sheet metal fabrication/Nonstandard parts Metal laser cutting/Stamping/Bending/Welding/Punching/Blanking/Forming Various of safety glass impact test equipment and parts Brackets/Gasket/Cable hanger/Connector/Clip/Clamp/Iron fittings/Hinge
ASSEM ELECTRONICS GMBH

Germany

Assem Electronic Gmbh was established in 2007, specializing in the production of electronic wiring harness, switches and sockets, electrical outlets and so on. In order to meet the needs of development, we established our trading company on the basis of this. We currently provide more widely commodities includes medical materials, electronic components, electronic cables and more. Our products covered body care fitness equipment and also some new concept goods. Adhering to Safety Standards As a good wire harness supplier, we implement ISO 9001: 2008 and ISO 14001: 2004 BSI safety guidelines , and meet the CE, BS , SASO, GCC certification. Providing Exceptional Fit and Outstanding Customer Service We promise reliable quality, reasonable price: We value customers' demand and requirement more than anyone else. Sell products that are suitable for most national markets. Ensure all products are fully tested and subject to pre-shipment quality control inspections. Promote ethical and transparent business practices.

SHENZHEN PROMOSTAR HARDWARE CO.,LTD

Germany

ShenZhen PromoStar Hardware Co., Ltd is a company who specialize in Metal CNC machining parts, CNC turning parts, CNC milling parts, stamping parts, sheet metal parts, welding products for all kinds of industry. The materials we used to worked were stainless steel, aluminium, titanium, brass, copper, carbon steel, POM, PEEK and so on. The headquater of Promostar located at ShenZhen, China with a 2000² meter workplant.Since 2016, Promostar has an office in Meerbusch, Germany. Since 2021 lunched a 3000² meter workplant in Jiangxi China. We can meet all industry demands, such as : Austronautic, Optik, Sensor, Electronic, Automotive, LED lighting, furniture, machinery & equipments, medicial equipments, plastic & moulds lines and so on. We can reach the tolerance within +/-0.002mm. The material we are using can be reached the standard cetifications from ROHS, REACH. Promostar invested a lot on the machines and worker technologies and we have a strong human resources department. All our team have more than 8 years relationship. We work on team. PromoStar is getting a good credit around the world. Please do not hesitate to contact us for more information !

All the products for "cable test equipment"

Stainless steel screw.

CNC Turning smart ring.

CNC aluminum turning rings.

Stainless steel bar

Website See all products
BAREISS PRÜFGERÄTEBAU GMBH

Germany

As a manufacturer of innovative and certified hardness test equipment and hardness test systems and services, it is our duty to guarantee quality. Our strengths are our focus on the essential and our drive to consistently meet all of our customers' requirements. As a manufacturer and family-run business we consider our responsibility to be not only to our products, but also to our employees. We serve customers in the following industries: rubber and plastics processing, automotive, medical technology, laboratories | institutes, aerospace engineering, and the food, optical, chemical, pharmaceutical, and cosmetic industries, among others.

Website

ZEMO VERTRIEBS GMBH

Germany

Our highly experienced torque specialists focus on controlled screw tightening as an area of expertise. Besides high-quality screw systems for industrial manufacturing, we also supply reliable pneumatic tools for maintenance and repair work (within the automotive segment). We can also create individual special purpose tools according to design for particular screw tightening situations. In addition, we can provide on-site training for your operators. Last but not least, we can service, calibrate and (if needed) repair torque equipment and pneumatic tools in our in-house workshop.

All the products for "cable test equipment"

Digital Torque Tester TDT3-G

Torque Wrench Calibration Device Mechanical Loader 'ML'

Rotary Torque Transducer CheckStar UTA

Digital Torque Tester DTT System 8

Static Torque Transducer TT-QC

Website See all products
SIVGIN KABELVERLEGUNG

Germany

With us, you have a reliable partner in all matters concerning cable laying and installation. SIVGIN is your interregional specialist when it comes to industrial and commercial cable laying and cable installation. Our range of services comprises all operations around the laying and the installation of cables. We are the competence leader in cable laying: We lay power cables, control and communication cables above ground as well as underground, in open cable installations and in difficult terrain. We lay cables provided on-site of any kind (e.g. low- to medium-voltage cables 1–110 kV, high-voltage cables, OWG cables, sheathed and control cables in all sections as well as communications cables and fire-alarm cables, etc.) in a wide variety of installation situations (platforms, runs, risers, trenches, tubes, etc.). We lay cables both inside buildings and in exterior settings.

Website
APT ANGEWANDTE PROZESSORTECHNIK GMBH

Germany

APT Angewandte Prozessortechnik GmbH from Hürth near Cologne, Germany, is one of the experts in leak testing all over Germany. The company specialises in the production of high-quality measuring instruments, including, for example, a leakage tester. In addition to various further systems and facilities for leak testing, the range of services includes development through to production for vacuum or overpressure processes including individual consulting. Testing devices in our PMD02 series are developed for professional leak testing – with high flexibility, robustness and ease of use. The test equipment is suitable for differential pressure method as well as for the mass flow methods, or a combination of both measurement methods. The PMF01 flow testing device can be used for various control tasks, such as for oil drilling control or an injection system test. For more than 20 years, we have been providing our customers with reliable test facilities for leak and differential pressure measurement as well as similar areas. We are happy to answer your questions about our products or test methods

Website See all products
ROVER-TECHNIK FREUND & FOIDL GMBH

Germany

Founded in 1987 by businessman Reimund Freund and technician Raimund Foidl, Rover Technik Freund und Foidl GmbH is now an established company with its registered office in Lennestadt, South-Westphalia, with its core business in manufacturing, sales and consultancy relating to underground pipe laying. It focuses on both horizontal and vertical drilling and driving engineering. Reliability combined with speed and flexibility. With this philosophy, unlike the large corporations, we offer our customers all the benefits of a company with short official channels and rapid decision-making processes. Over a period of 20 years, Rover Technik has been able to implement and support numerous demanding projects in the area of underground pipe laying within Germany and abroad. Our continuously successful results are an indication of the efficient use of our equipment and the quality of our advice.

Website
INFICON GMBH

Germany

INFICON is a leading provider of innovative measuring equipment, sensor technologies for critical processes and advanced process control software that enhance productivity and quality in sophisticated industrial vacuum processes in highly specialised sectors. These products are essential for gas leak detection in air conditioning/refrigeration technology and automotive manufacturing. They are also vital to original equipment manufacturers (OEMs) and end-users in the complex fabrication of semiconductor chips and thin film coatings (e.g. for flat panel displays, solar cells, magnetic and optical storage media, visual and decorative coatings and architectural glass). Other application areas for our vacuum technologies include the life sciences, research, aerospace engineering, food packaging, heat treatment, sterilisation and laser cutting. INFICON also uses its expertise to provide unique products for the analysis of toxic chemicals.

Website See all products
TESTEM GESELLSCHAFT FÜR MESS UND DATENTECHNIK MBH

Germany

TESTEM GmbH is a reliable supplier of measurement data recording systems and devices. Our many years of experience, comprehensive expertise and goal-oriented approach to solutions have allowed us to manufacture high-quality devices and systems for recording and transmitting measurement data as well as for determining physical parameters in the sensor segment. Thus, we provide systems for fuel quantity measurement and closing force measurement as well as powerful telemetry systems, fuel injection monitoring systems and high-quality HF amplifiers. With our extensive knowledge, we have come to focus on areas such as contactless (radio) data transmission. For example, in the area of radio data transmission, we produce diversity receivers, wideband receivers and wideband transmitters that function as data transmitters. Additionally, we offer powerful measurement recording devices such as data loggers and single-stroke engines that are used to simulate different motor operating states.

Website
DÜRR NDT GMBH & CO. KG

Germany

DÜRR NDT offers comprehensive digitisation solutions for the nondestructive testing (NDT) industry: Networked, digital radiography systems combined with innovative software. These include high-resolution image plate scanners (CR) and flat panel detectors (DDAs), software for image capture and analysis, standards-compliant digital archiving tools and the integrated NDT workflow management and reporting platform DRIVE NDT. The innovative systems from DÜRR NDT are always at the cutting edge of technology and continue to set new standards in terms of resolution, user-friendliness and durability. We are still the only CR manufacturer with a BAM-certified 30 μm basic local resolution worldwide! In almost 20 years, DÜRR NDT's X-ray inspection systems have established themselves in a variety of industrial applications, both mobile and stationary, and are used in more than 80 countries.

All the products for "cable test equipment"

HD-CR 35 NDT

DRC 3643 NDT

DRC 1024 NDT

Website See all products
MERECS ENGINEERING GMBH

Germany

Merecs Engineering GmbH specialises in the areas of test automation, software development and test equipment construction. Our range of services include defining requirements, design and implementation, training and commissioning domestically and abroad, plus comprehensive support and maintenance of test systems. Examples include: - End-of-line test benches, durability test benches, development test benches, climate and temperature test benches, leakage test benches (gas/hydrogen), test benches for tilt sensors/multi-axis movement simulation, test benches for power electronics and E-charging points. Working with our customers, we can connect these test systems to their IT infrastructure (databases/ERP systems). Using Python and Microsoft PowerBI, we produce automated analyses of test and production data on request. For this purpose, we create well-structured dashboards (available online on the company network at any time) showing important key figures such as First Pass Yield (FPY), process capability, statistics, etc. As a National Instruments Alliance Partner, we use NI TestStand as a test management tool and NI LabVIEW for software development. Our certified and experienced software architects and developers have an extensive library of software modules that are used in the field of test automation and beyond. In addition, we use C/C++ in embedded systems where microcontrollers are used

All the products for "cable test equipment"

Press-off stand / Press-off of fittings / Pressure test

LabVIEW-RT / LabVIEW-FPGA / PXI / cRIO

Tilt Sensor Test Bench, Tilt Table, Rate Table

Test management with NI TestStand

Test stands for heat pumps, fluid systems, gas- / hydrogen

Website See all products

ERTEMES GMBH

Germany

ErTeMes GmbH offers efficient and proven expertise in the testing and measuring of technical systems that can be used in any technical sector. Our mission is to provide user-orientated and method-supported solutions for your measurement task that are tailored and pragmatic. Our customers benefit from our many decades of experience in testing and metrology, and our tried-and-tested methodology. We provide you with expert support to help you plan and carry out your test campaigns and analyse your measurement data. We develop proposals for determining measurement uncertainty and optimising your measurements. ErTeMes GmbH is proud to represent the HGL Dynamics Group in Central Europe. We not only provide you with innovative measurement hardware and powerful software solutions, but also highly qualified technical support. We can also offer you a tailored range of training courses and workshops on testing and measurement and other related areas.

All the products for "cable test equipment"

Training

measuring and test equipment management

Optimize measuring and test equipment

Build a measuring and test equipment management system

Website See all products
POPPE + POTTHOFF MASCHINENBAU GMBH

Germany

Poppe + Potthoff Maschinenbau GmbH develops and manufactures installations for operation and endurance testing of components in the automotive and shipbuilding sector as well as other industries. The precise and powerful special machines that this specialist for high pressure and testing technology produces, are used in research, development and production processes. This includes installations for bursting pressure and leak tests, pressure cycling testing, autofrettage as well as installations for testing the function of components. Our company, based in Nordhausen (Germany), is a member of the Poppe + Potthoff Group. As a developer of systems, we put our customers' requirements centre stage. Our focus is on technologically complex installation systems of testing and high pressure engineering. As a developer of systems, we offer everything from a single source; from concept development through to design and production (mechanical + electric) all the way to software development.

All the products for "cable test equipment"

Pressure Cycle Test Stand | Impulse Test

Burst Test Stands

Dual Chamber Pressure Pulsation & Burst Test Stand

Autofrettage

Website See all products
MELUTEC METROLOGY GMBH

Germany

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

Website
IIM AG MEASUREMENT + ENGINEERING

Germany

iiM AG measurement + engineering designs, produces and supplies high-quality and high-performance products for industrial image processing.

All the products for "cable test equipment"

Twist Length Detector TLD

Core Removal Punch - CRP

Hot Set Test

Cold Impact Test

Cold Bend Test CBT

See all products
MSCAN MASS SPECTROMETRY CONSULTANTS AND ANALYSTS

Germany

The company MSCAN MASS SPECTROMETRY CONSULTANTS AND ANALYSTS, is a Manufacturer/ Producer, which operates in the Testing equipment industry. It also operates in the Engine testing and regulating equipment - electronic, and Engine testing and regulating equipment - electronic industries. It is based in Unterhaching, Germany.
3-S-PHARMACOLOGICAL CONSULTATION & RESEARCH GMBH

Germany

The company 3-S-PHARMACOLOGICAL CONSULTATION & RESEARCH GMBH, is a Service Provider, which operates in the Engine testing and regulating equipment - electronic industry. It also operates in the Biotechnologies, Pharmaceuticals - basic and auxiliary products, Pharmaceutical products, Testing equipment, Biotechnologies, Pharmaceuticals - basic and auxiliary products, Pharmaceutical products, and Testing equipment industries. It is based in Harpstedt, Germany.
EVES GMBH

Germany

The company EVES GMBH, is a Wholesaler, which operates in the Engine testing and regulating equipment - electronic industry. It also operates in the Testing equipment, Scientific equipment and instruments, Laboratory equipment and instruments, Equipped offices and industrial premises - services, Testing equipment, Scientific equipment and instruments, Laboratory equipment and instruments, and Equipped offices and industrial premises - services industries. It is based in Mommenheim, Germany.
BML ANALYSE-LABORATORIEN

Germany

The company BML ANALYSE-LABORATORIEN, is a Service Provider, which operates in the Engine testing and regulating equipment - electronic industry. It also operates in the Biotechnologies, Pharmaceuticals - basic and auxiliary products, Pharmaceutical products, Testing equipment, Biotechnologies, Pharmaceuticals - basic and auxiliary products, Pharmaceutical products, and Testing equipment industries. It is based in Singen, Germany.
INSTITUT DR. LÖRCHER

Germany

The company INSTITUT DR. LÖRCHER, is a Service Provider, which operates in the Engine testing and regulating equipment - electronic industry. It also operates in the Pharmaceutical products, Testing equipment, Equipped offices and industrial premises - services, Quality control and certification, Pharmaceutical products, Testing equipment, Equipped offices and industrial premises - services, and Quality control and certification industries. It is based in Ludwigsburg, Germany.
GENETIC ID EUROPE AG

Germany

The company GENETIC ID EUROPE AG, is a Manufacturer/ Producer, which operates in the Testing equipment industry. It also operates in the Engine testing and regulating equipment - electronic, and Engine testing and regulating equipment - electronic industries. It is based in Augsburg, Germany.