Results for

Industrial installations - Manufacturer Producer - Germany

1,374 Companies

354 Products

HERBERHOLZ GMBH

Germany

For over 60 years, we have been producing and supplying shut-off valves, choke valves and regulating valves made of a variety of materials and nominal widths, primarily for industrial applications but also for building technology and the automotive sector. In doing so, we use components which are in stock and which can be installed and equipped with the required drive systems in no time at all. We are committed to carrying out your system tasks.

All the products for "industrial installations"

AK/DVGW-SSK

HRD / HRA welded body

FRK

FDK / FAK

LDKF

Website See all products
FRIEDRICH SCHULTZE GMBH

Germany

Schultze RiRo is a reliable partner in nearly all imaginable applications – we stand out thanks to the extraordinary stability and simple connection of their products. Our finned tube heaters protect your delicate systems against frost. Dirt, moisture or water jets and temporary flooding are not a problem for Schultze RiRos because these trade and industrial heaters fulfil all the criteria of protection class IP 66/67.

All the products for "industrial installations"

InduStrip EZ2 infrared ceiling heater

InduStrip IHS Industrial Infrared heater

Infrared heater HA

Infrared heater HWP2

Screw-in heater G2

Website See all products
BORSIG GMBH

Germany

The BORSIG Group's head office is BORSIG GmbH, based in Berlin. Strategic management focuses on three areas: Group development, product and market strategies, production structures, target formulation and pursuit, financial management and controlling, personnel management. BORSIG is synonymous with quality, reliability and innovation from Germany. Our highly qualified engineers and technicians face the challenge of developing only the best systems and machines, manufacturing them and assembling them at their destination. This means that our products are efficient and reliable even under the most difficult conditions and are an investment in the future. Each of our production sites in Berlin, Gladbeck and Meerane has its own outstanding qualities. What they all have in common is that they are equipped with state-of-the-art technologies, innovative manufacturing processes and quality testing and control that is independent of production and product lines.

All the products for "industrial installations"

BORSIG Synthesis gas waste heat boiler

BORSIG Steam superheater

BORSIG Reformed gas waste heat boiler

Website See all products
IMM MASCHINENBAU GMBH

Germany

IMM is synonymous with belt grinding machines, polishing machines, bridge saws and expertise proudly Made in Germany. IMM has been leading the field of professional surface processing for more than 60 years. Our products range from manual machines for grinding and polishing right through to automatic systems. We offer comprehensive solutions for customers in the aerospace, automotive, energy and medical technology sectors. At our location in Riederich, we develop and build our systems and drive innovation for the benefit of our customers worldwide. Our machines are made for continuous industrial operation. The heavy and robust design guarantees low-vibration processing. Sales in Germany are predominantly processed in-house. Our customers across the world are supported by more than 25 distributors. IMM Maschinenbau - the solution for your success!

All the products for "industrial installations"

Double sided belt grinder and polishing machine type 72730

B200/150 Flat platen belt grinding machine

72711 Single sided belt grinding and polishing machine

DS 7722 double ended sander

Website See all products
RÖMHELD GMBH FRIEDRICHSHÜTTE

Germany

Together with the clamping technology specialists HILMA and STARK, ROEMHELD forms a group of companies offering a comprehensive product range in the field of clamping technology for production technology. The product range is supplemented by numerous hydraulic elements for general industrial use as well as assembly and drive technology components and systems. Thanks to the diversity of its products and long-standing experience, the ROEMHELD group is able to develop and supply customer-specific solutions across the entire company. The ROEMHELD Group has around 560 employees in total and an annual turnover of more than € 100 million. With a focus on global presence Export business is becoming increasingly important in addition to its domestic customers who receive comprehensive support from 17 sales offices and sales partners in Germany. Roemheld already has an export share of around 50% today, which increases to over 65% due to indirect exports. Subsidiaries in Great Britain, France, China, USA, Japan and South Korea as well as numerous sales partners ensure that Roemheld customers receive extensive advice, effective sales and distribution and comprehensive service worldwide.

All the products for "industrial installations"

Threaded-body clamping module

Bearing press

Threaded-body clamping module

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

KENDRION KUHNKE AUTOMATION GMBH

Germany

Kendrion Kuhnke Automation is your specialist for magnet, fluid and control technology and offers safe, precise and innovative components and assemblies for a wide range of applications. Kendrion Kuhnke Automation is part of the industrial division of Kendrion N.V. und trades under the Industrial Actuators and Controls (IAC) business unit. When it comes to developing and manufacturing electromagnets and actuators, IAC benefits from over 100 years of experience and offers a wide range of products. In addition, IAC is a fluid technology manufacturer specialising in the development of custom valves, valve blocks and pressure regulators. In the field of control technology, IAC uses the internationally recognised industry standards in order to enable integration into a wide variety of infrastructures, as well as inductive heating systems that enable emission-free heating in industrial processes. Our products are primarily used in medical equipment, such as dialysis machines, anaesthesia machines, respirators, dental units, treatment equipment and therapy equipment. They are also used in automation and robotics, such as for FTS, material handling systems and cobots. Furthermore, they are used for mechanical engineering in the food and drink industry, in printing and paper processing and in the textile industry. Further applications include fire protection and access controls in building technology and emergency oxygen supply and in-cabin applications in aviation. Find out more about Kendrion at www.kendrion.com

All the products for "industrial installations"

Vico MT 1527 CODESYS PLC WV

Vico MT 1527 CODESYS HMI

Vico MT 727 CODESYS HMI

Vico MT 1027 CODESYS HMI

Website See all products
STL STEUERUNGS-TECHNIK-LEUTHE GMBH

Germany

Your international automation specialist. PLC PROGRAMMING – Simatic TIA Portal – Simatic Step 7 – 840D – Beckhoff – Allen Bradley. ROBOT PROGRAMMING – Kuka – ABB – Fanuc – Yaskawa – Comau – UR/Universal Robot. DIAGRAM CREATION – EPLAN P8 – WSCAD – parts list creation – component lists – customer-specific. SWITCH CABINET CONSTRUCTION – customer-specific – in line with applicable standards – CE marking – electrical testing. PROJECT MANAGEMENT – multilingual – customer trainings – documentation. COMMISSIONING – worldwide – programmers – special machine construction – flexible. Robot programming | Diagram creation | Switch cabinet construction | Switch cabinets | Switch cabinet assemblies | Switch cabinet planning | PLC programming | Control system construction | Automation technology | Automation technology for machine tools | Automation of industrial machines and industrial constructions | Automation of special machines | Industrial control systems | Installation of switchgears | Switch cabinet electronics | Software for automation systems | Software for automation technology | Mechanical engineering | PLC (programmable logic controller) components | Control systems, electronic, for mechanical and plant engineering | Control systems for production facilities and production machines | Control technology | Cell construction | UR | Universal Robot | MRK | Cobot | Lightweight robot. Office in Bobingen | Near Munich | Neu-Ulm | Günzburg | Heidenheim Brenz | Aalen | Mindelheim | Landsberg Lech | Nördlingen | Donauwörth | Dilliningen | Krumbach

Website
ENA ENERGIETECHNIK UND ANLAGENBAU GMBH

Germany

At ENA Energietechnik und Anlagenbau GmbH, we provide global solutions for plant operators. Our company manufactures both its own products, such as flaps, gate valves and compensators in the field of plant and control technology, as well as providing contract manufacturing services for steel structures. Our products.: Steel chimneys, louvre flaps for ventilation technology, pipework, flaps, eccentric flaps, double flap valves, toggle lever flaps, control flaps, flue gas flaps, quick-action flaps for explosion protection. Our products are installed in industrial plants in a wide range of sectors across more than 30 countries.

Website
A.B.S. SILO- UND FÖRDERANLAGEN GMBH

Germany

Since 1984, A.B.S. has been manufacturing a wide range of silo variations, offering its customers endless options for storing their bulk materials. The founders had an innovative idea: to use textiles instead of metal to build their silos – just as stable and hard-wearing, but more sustainable and flexible. This design has proven its advantages: A.B.S. is now a global watchword for high quality, flexible silos which last for decades, with around 100, 000 successful installations for industrial and agricultural applications, and for storing wood pellets. With individual solutions precisely tailored to your requirements, you are guaranteed the perfect product. We specialise in tailor-made solutions for all aspects of bulk materials handling, from storage to conveying, dosing and discharge. For this, we employ our technical expertise in 3D design and employ lasers for cutting so there is no limit on size. Take advantage of our forty years of experience as a manufacturer and designer, ensuring we are a reliable production partner to our customers. Do not hesitate to contact us if you have any questions or queries! We look forward to hearing from you and drawing up your individually tailored offer!

Website See all products
MAYSUN SOLAR

Germany

Latest information: Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock! ! ! Don't hesitate to contact us to enquire and join the pre-order and purchase queue! ! ! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com We welcome PV industry distributors and installers to work with us, and private customers are also welcome to contact us. Maysun Solar is headquartered in Hangzhou, China and is part of Zhejiang and Shanghai New Energy Technology Co. Maysun Solar specialises in distributed PV modules and has 14 years of research experience. It has two production sites in Dubai and China. It has nine global sales offices in Spain, Germany, the Netherlands, Italy, Poland, Hungary, Saudi Arabia, Indonesia and the United Arab Emirates. Products are sold in 80 regions worldwide. I. Why choose Maysun: Overseas warehouse storage, fast delivery 2. Customisable: Solar panel sizes can be customised to meet customer needs flexibly 3. Quality assurance: 15-year product warranty and 25-year performance guarantee 4. Overseas offices: overseas offices are available and can be visited at any time 5. 14 years experience: the company was established in 2008, experienced 6. 2 production bases: 1GW annual production capacity, continuous supply capability

See all products

ZS-HANDLING TECHNOLOGIES GMBH

Germany

ZS-Handling GmbH is an independent company that develops systems and installations for industrial handling technology based on ultrasonic air bearing technology. We offer products for gripping, conveying, loading and unloading, inspecting, sorting and isolating workpieces. Our areas of application include battery/fuel cells, films, glass, lenses, medical technology, packaging, wafers and chips. We operate internationally and sell our products all over the world. Our range is developed and produced at the Regensburg site in Bavaria. 2006: Founding of ZS-Handling GmbH in Regensburg by Dr.-Ing. Michael Schilp and Dr.-Ing. Josef Zimmermann with our patented ultrasonic bearing technology. 2008: Certification according to ISO 9001 – 2008 international quality management system certification. 2011: Market launch in China and Taiwan. 2013: Market launch in Korea. 2014: Production of first series systems. 2019: Entry into medical technology, especially ultrasonic grippers for intraocular lenses.

See all products
GRONEMEYER MASCHINENFABRIK GMBH & CO.

Germany

Planning, implementation, project management, service - from joint planning through commissioning and beyond we provide you with the experience of our engineering and installation teams. Our conveyor systems are used for the intra-company flow of materials of general cargo, as well as for linking production machines. We deliver complete conveyor systems for, among others, the food, beverage, glass and chemical industries. Installation & Commissioning by our experienced specialist installers worldwide Highly specialized installers available at any time Production support, line optimization, spare parts inventory, conversions - a well-stocked warehouse and our metal-cutting production ensure a reliable supply of spare parts.

See all products

Product recommendations

France

Germany

France

Germany

See more products

PURELINK GMBH

Germany

PureLink GmbH develops, produces and sells products for professional presentation and media technology. Since 2006, we have been the industry leader in digital connection solutions like HDMI cables, adapters, wireless HD and optical fibre products. We are a partner to specialist shops, industry and installers alike. Our portfolio offers both high-quality standard products and individually tailored solutions. Companies need investment security when designing their digital architecture. The main requirements for AV products are compatibility, multifunctionality and unbeatable signal transmission quality in the long term. As a German manufacturer and distributor, we provide future-oriented AV solutions to this end. OneAV expands our range of services with a new online purchasing concept for retail and professional trades. The B2B online store offers innovative, time-saving guidance to our users and over 2000 professional products from PureLink and other selected, leading brands.
SCHRACK TECHNIK DEUTSCHLAND GMBH

Germany

For decades, SCHRACK TECHNIK has distinguished itself as an expert partner for its customers in low-voltage applications. This includes energy technology, industrial and switchboard construction, building installation technology, safety lighting, systems engineering, data network technology, lighting technology, photovoltaics and e-mobility. We are committed to being the best and most reliable partner for our customers in our sales area and in our product ranges. We want to use our innovative products, full product range, optimum product availability, personal support and excellent logistics to show our customers that we are by far the best provider for handling their projects effectively, safely and quickly. You can find comprehensive information about our products anywhere and at any time, for instance in catalogues (available in both paper and electronic formats), during consultations, on the online shop, at our consultation centres and with our extensive e-commerce tools.
RM REGALBAU- UND BETRIEBSMONTAGEN GMBH

Germany

We have been your expert partner in shelving construction and installation for over 20 years. We always provide a reliable and timely service. We install shelves, shelving systems and factory equipment quickly and flexibly in almost any location in Europe. Our products: Steel platforms, industrial shelves, industrial installations, shelving installations, shelving, high-rack warehouse installations
KLÖPPER-THERM GMBH & CO. KG

Germany

With over 90 years of experience, Klöpper-Therm from Germany has specialised in development, planning, manufacture and installation of electric heating systems for industrial applications to suit a wide range of requirements. Alongside individual customer requests, all international standards required are taken into consideration during planning and construction. The heating systems can be supplied as explosion-proof for use in explosion hazardous areas (zones 1 and 2) on request. Reliable functioning, the highest quality and great economic benefits of our products form the basis or our reputation as a specialist in electric heating systems. Klöpper-Therm puts this motto into practice for our customers with motivation and the latest technologies. Klöpper-Therm electric heating systems embody the highest quality right from the start.

Website See all products
OHMEX INDUSTRIELLE ELEKTROWÄRME GMBH

Germany

OhmEx Industrielle Elektrowärme GmbH designs, and supplies customer-specific electric process heaters and electric switchboards for use in safe areas and explosion-protected zones according to ATEX and IECEx. These process heaters carry the CE marking in compliance with current CENELEC standards and comply with the applicable IEC standards. Our main areas of expertise and services are as follows: Consultation (feasibility study/economic viability study/quotation), planning (design planning/3D model/thermodynamic calculations/design testing), production (mechanical production/welding/electrical work/pressure tanks/acceptance, e.g. TÜV/final inspection), commissioning (documentation/personnel training). Together with our external production partner, Mainsite Technologies GmbH, we create the preconditions required for efficient, innovative and inexpensive product solutions. Top quality is our standard.

Website See all products
MOOG GAT GMBH

Germany

Moog GAT GmbH is your reliable partner for rotary unions, slip rings, air bearings and torsion motors for high-performance applications.

Website See all products
SCHÜTZ GMBH MESSTECHNIK

Germany

Schütz Messtechnik is an experienced and qualified company that has been operating as a service provider and an equipment manufacturer for energy companies since 1968. In the amenities industry, Schütz checks the public gas pipeline networks in accordance with the regulations G 465, G 466/I and G 466/II of the German association for gas and water (DVGW), carries out leak and pipeline detection and exchanges meters. In addition, it holds technical seminars and training sessions for employees from utility companies. Schütz GmbH has been certified by the DVGW as a company specialising in checking gas pipelines. Energy companies using a geographic information system (GIS) can check their pipeline network with Schütz's digital technology. Among Schütz GmbH's client base today are more than 100 municipal utility companies, with whom the company maintains long-standing, close and trusting business relations.

All the products for "industrial installations"

LMG 05

Website See all products
EMBRO GMBH

Germany

EMBRO GmbH is a manufacturer of electrical heating elements and surface heating elements, silicone heating mats, heating fabrics as well as flexible heating foils and heating systems, textile sensors/RFID antennas/composite applications – carbon preforms/textile electrodes and innovative textiles. We are specialised in developing and producing technical textiles with the help of plaiting/embroidery machines. During this process, conductive threads, strands, wires or heating conductors are laid on substrate material by means of computer-controlled machines. They are then fixed in place with diverse sewing and embroidering techniques and offer a durable, highly flexible incorporation. Modern CAD workstations and corresponding capacities enable us to always react quickly and most flexibly. In addition to this, there is the consistent further development of materials and production technologies, as well as close cooperation with a wide range of external partners such as research institutes.

All the products for "industrial installations"

Functional integration on glass mesh fabric

Aramid Fiber Heating Mats

Website See all products

FRIEDRICH WÜRTH PRODUKTIONS GMBH

Germany

Benefit from more than 65 years of experience. The company was founded in 1950 by Friedrich Würth with the corporate objective of producing and repairing heating elements for household devices, industrial applications as well as medical and laboratory technology. His successors have remained true to the original company objectives to this day. Today, his grandson Steffen Wolf runs the company in the tradition of its founder’s philosophy. You can benefit from the advantages of our location. The company headquarters of Friedrich Würth Produktions GmbH are located in Empfingen. The production site of Würth products is in the Czech Republic. The WoTech company belongs to the Würth company group. We would be happy to show you our product range on the following pages, which includes, in addition to electrical heating elements for various applications and ceramic heating plates, complete device and system component manufacturing.

Website
TECHNOTHERM INTERNATIONAL - LUCHT LHZ ELEKTROHEIZUNG GMBH & CO. KG

Germany

TECHNOTHERM's history has been shaped by its positive growth in the building technology market. Over the past 30 years, the company has established itself both on the national and international markets thanks to its wide product range in the areas of electric heating, high-quality products and innovative solutions (for special tasks). Over time, we have continually broadened and optimised our product range in the areas of electric storage heating, electric partial storage heating, floor tempering, direct heating, marble heating and infrared heating. Our company's key areas of expertise are in the fields of electric storage heating and electric heating. Our continual optimisation of storage heating technology made it possible for housing depths to be reduced considerably. Today's TECHNOTHERM storage heaters stand out thanks to their smart control and regulating systems, modern, timeless design and reliable quality.

Website
RK ROSE+KRIEGER GMBH

Germany

Founded in 1972, RK Rose+Krieger GmbH is now a subsidiary of internationally operating Phoenix Mecano AG and is a full-service provider offering a range of products that is unique to the market, in the areas of linear technology, profile assembly technology, connection technology and modular technology. The range includes catalogue products, as well as custom solutions, system solutions and special developments. RK Rose+Krieger employs more than 500 members of staff worldwide, around 210 of which are based at headquarters in Minden. Find out more at www.rk-rose-krieger.com. Our product areas include: Linear technology: We can move products up to 3 tons and 12 m accurately, dynamically and reliably. Pipe connecting technology: Reliable clamping of square or round pipes, maximum variety (8-80 mm) on the market. Profile technology: The tried-and-tested BLOCAN® profile system, aluminium profiles in the cross section of 20-360 mm. Modular technology

All the products for "industrial installations"

Support arms / swivel arms for monitor mountings

RK monitor mounting

Website See all products
ACE STOSSDÄMPFER GMBH

Germany

We damp everything except for your expectations. ACE is a globally recognised specialist in the area of industrial damping technology – represented in 45 countries on all continents. ACE has been a highly successful player on the German market since 1978. In this country alone, 25 engineers work day-in-day-out on advancing the product range. ACE customers benefit from sophisticated solutions, valuable innovations and exemplary service in relation to damping technology. Through its close collaboration with leading mechanical engineering companies, the German ACE branch has recently established itself as the pioneer in state-of-the-art technology. The advantages for customers are obvious: Expert technical advice on site and on the phone, customer-specific design, delivery without any minimum quantities from one unit upwards in the shortest possible time, sophisticated installation and functional accessories, realistic prices

Website See all products
MESUTRONIC GMBH

Germany

Innovative technology, cutting edge expertise. MESUTRONIC Gerätebau GmbH has been producing innovative metal detection technology for industrial applications for more than 25 years. From our headquarters in Kirchberg, we supply our customers operating worldwide with advanced metal detectors, metal separators and X-ray inspection systems. Our passion for innovation constantly drives us to achieve the highest levels of performance, meaning that we are rightly considered to be one of the leading firms in the field of metal and foreign object detection technology. We offer a wide range of products for the food, pharmaceutical, hygiene, plastics, textile, wood and mining industries to enable you to protect your production machines and ultimately your customers from unwanted foreign objects. As an owner-operated company, we have been placing our trust in Germany and its workforce for decades. Our high-quality systems are a direct result of their drive and expertise.

Website See all products
RALF LANG MASCHINENBAU GMBH

Germany

As a leading general contractor for automation and robotics, we offer innovative solutions, flexible robot concepts and comprehensive process knowledge. Whether this is for a series or a specialised machine. We specialise in the automotive industry, medical technology, food, electronic equipment and electrical appliances, and our core competences are in measuring, assembling, sorting, combining and packaging. Leading automotive manufacturers, pharmaceutical companies and their suppliers rely on our innovative and high-quality solutions, with more than 300 pieces of plant machinery and measuring machinery supplied all over the world. Our strengths lie in our services and our level of quality, above all in our process competences. Example: Flexible feeding using BinPicking. With this approach, we can cope with high parts variation and the smallest batch sizes. By dispensing with manual part feeding, we increase efficiency, safety and correct handling. Combining (joining, metering, adhesive bonding with various application techniques) of components. Our aim is to design the process to achieve series production of a consistent quality, adapted to your performance requirements. Testing and measurement, visual or tactile, of components. Both using our own testing solutions and using external testing product manufacturers. Whether it's an individual automated machine, rotary transfer system, linear transfer system with just a few cells or a large-scale plant – you're in good hands with us. Come and be impressed by our tailored solutions and our high quality standard.

Website See all products
RUF MASCHINENBAU GMBH & CO. KG

Germany

Ruf Maschinenbau GmbH & Co. KG, based in Bavaria/Zaisertshofen, specialised in the design and manufacture of briquetting systems more than 35 years ago. As global leader in the sector of briquetting, over the years RUF has sold more than 5.000 briquetting machines in more than 100 countries. RUF presents solutions for the briquetting of wood, metal, biomass and numerous other materials. In the metal sector, we can offer the right machinery for a wide range of applications, including aluminium, cast iron, grinding sludge and even steel shavings. Profit from Briquetting: • Volume reduction • Reduction in storage and transport costs • Dewatering & oil removal of chips and grinding sludge • Recovery of expensive cooling lubricants (oil or emulsion) • Increased melting yield/increased value of the waste material Based on numerous press tests on a huge range of materials, RUF can provide the right machinery to suit every need. RUF manufactures briquetting machines at its own factory. By manufacturing the components and producing the machines ourselves we are in a position to react quickly and flexibly to our customers' needs. Because of our long-term know-how, we specialised in finding individual customer solutions. The RUF philosophy: As a company with comprehensive project expertise, we are aware that energy resources are continuing to dwindle. Our technical competence make an important contribution to discovering so far unused residual materials.

All the products for "industrial installations"

RUF Periphery: Oscillating conveyor channel

Website See all products
PFLITSCH GMBH & CO. KG

Germany

Quality made in Germany PFLITSCH sets trends worldwide and crosses established frontiers. Passion for the best solution – is the slogan under which PFLITSCH acts successfully on the market and impresses customers worldwide with practical and safe product solutions in the field of industrial cable routeing. The PFLITSCH brand, with its striking hexagon, has an international reputation for "Made in Germany" quality with products that are exclusively manufactured in Germany. A family-owned and managed company, PFLITSCH has more than just products like cable glands and trunking in focus, we also delight our customers with practical accessories, reliable design software, perfectly designed tools and machine tools as well as services ranging from individually packaged cable glands to ready-to-install trunking assemblies. This holistic approach is reflected in our slogan "We cross the established frontiers". We visualised this with the two "Wuppermen": these two larger-than-life-sized stainless steel figures stand on company land, one on each side of the River Wupper, and have become known way beyond the Wupper valley.

All the products for "industrial installations"

Ex-d cable gland LevelEx and LevelEx AC

Website See all products
HAINBUCH GMBH SPANNENDE TECHNIK

Germany

We develop and produce highly precise clamping devices for clamping workpieces when milling, turning and grinding on machine tools.

Website See all products
FLUKE PROCESS INSTRUMENTS GMBH

Germany

Fluke Process Instruments designs, manufactures, and markets a complete line of infrared temperature measurement and profiling solutions for industrial, maintenance, and quality control applications. Distributed worldwide under the Raytek, Ircon, and Datapaq brands, the products reflect the combined experience of over 125 years in manufacturing the world’s finest temperature measurement tools and devices. We are Raytek, Ircon, and Datapaq. Together, we are Fluke Process Instruments, advancing the reputation of the worldwide leader in measurement tools by offering a broad portfolio of industrial temperature measurement solutions. Individually, we have earned the respect of manufacturing’s most valued names. Together, we are the temperature technology leader – pioneers of many industry firsts, market innovations and new technologies, and the brands of choice for the harshest, high-temperature industrial environments in manufacturing. Raytek, Ircon, and Datapaq. The first names in temperature control have become the last word in manufacturing with confidence: Fluke Process Instruments With over a century of combined experience in developing innovative products that improve product quality and reduce waste, our team is committed to achieving new advancements that will benefit our customers.

All the products for "industrial installations"

ThermoView TV40 Thermal Imager

Website See all products