chemical product Germany

...We mix your products according to your specifications and formulations! We homogenize your products using various mixing techniques based on your guidelines and recipes, which are, of course, treated with the utmost confidentiality. After mixing, we package the product in various containers such as bags, big bags, buckets, and more. We are happy to use your own packaging or provide options from our portfolio.

... Z8E, Flottweg always has the right model of machinery available, whether it is a two-phase or three-phase separation process. Common uses of the Flottweg Z8E - Mining and metal recovery. - Chemical and biotechnology. - Food and beverage industry. - Vegetable oils, animal fats, and renewable fuels. - Wastewater and sludge. Decanter drum: Tailored solutions Screw conveyor: Tailored solutions Wear...

...Show product variants Item number: 2-0601-0250-50 Description: Bottles Width: 61.00 mm Weight: 20 g Height: 104.00 mm Material: HDPE Pallet unit: 10800 UN approval: without UN approval Packaging unit: 450 Volume: 250 ml Opening: 50 mm...

...are used in the machinery industry, metal industry, paper industry, chemical industry, electrical industry, electronics industry, automotive industry, food industry, military goods DESI PAK®: - available in sizes from 1/6 to 32 dry units - highly active desiccants in bags with casing materials such as fiber fleeces, composite materials, paper, or Tyvek® - meet all quality and performance...

...Additives for the Paint and Coatings Industry Chemical additives for the quality optimization of paints, coatings, and similar systems to enhance product properties such as gloss, flow, wettability, surface texture, or storage stability. Wetters and dispersing additives, defoamers, degassing agents, corrosion protection additives, multifunctional additives, anti-skinning additives, slip additives, flow additives, substrate wetting additives, rheological additives, matting agents...

...Vita RDP® is a spray-dried, free-flowing powder that redistributes into an emulsion when mixed with water. It forms a flexible and adhesive polymer film upon drying, offering good storage stability and flowability. The powder can be pre-mixed with cement, fillers, and additives, simplifying on-site preparation and enhancing efficiency and quality in construction. Product Composition - Polymer...

... considered typical weak points in thermal insulation at the base of the wall above the basement ceiling. Our product solution addresses the issue of the thermal bridge at the wall base, closes the gap in the interrupted insulation, and thus minimizes heat loss through the building's base.

...Displacement pump hermetically sealed, without mechanical seal. Dry self-priming even in ATEX areas. Ring piston pumps without mechanical seal. ATEX certification, capable of dry running even in EX areas. Self-priming, CIP-capable, can draw from vacuum or pump into vacuum. Product recovery. Hermetically sealed: without mechanical seal dry self-priming: less product loss...

...Eco-Friendly Degreaser This cleaner combines high performance with effective environmental protection and safety for personnel, making it the ideal choice for degreasing in ongoing processes. Product Features Applications Available container sizes: 20 l, 208 l, 1,000 l...

...P3 cleaners are an integral part of our product range. They are primarily needed in the context of hygiene solutions, cleaning processes, and disinfections. Whether in gastronomy, healthcare, or the food and beverage industry – P3 cleaners are extremely effective aids, available in aqueous, alkaline, acidic, and neutral forms. CG Chemicals has been working in trusted collaboration with Ecolab...

...-quality mass flow meters, volumetric counters, or scales, dosing valves in single or double-stage designs, and dosing pumps in various configurations are selected. The automation and visualization of the dosing systems provide extensive comfort for operational handling and quality assurance. Recipe controls and trend recordings can be implemented, offering a high level of product safety.

...Combination product (corrosion protection for ferrous metals & non-ferrous metals, also for aluminum and dispersant) for semi-open or closed cooling circuits...

...Aluminum-Magnesium powder is produced as an alloy powder and is available in various grain sizes ranging from 0 to 0.5 mm, as well as in passivated or unpassivated forms. Further details such as product and safety data sheets are available upon request.

... raw materials industry. With additional installations, thermal (cooling/heating) or process engineering (drying) product treatment can be achieved. Bulk materials can be transported both upwards and downwards. Advantages and Benefits • Material-friendly, energy-efficient, and space-saving vertical transport • Low-maintenance continuous operation • Easy to clean and hygienic design • Natural...

...) Product applications: for food products, for quality control, for finished products Applications: for industrial use, for the agri-food industry, pharmaceutical, chemical Other features: with conveyor belt, dynamic Product handling: transported products, packaged products transported Protection rating: IP 54 (standard), IP 65 (optional) Structure: Stainless steel...

...Rollers made of EPDM: EPDM is a rubber that has similar properties to NBR, but with lower wear and break resistance. Additionally, EPDM has a higher chemical resistance. In the roller sector, EPDM is used when the following issues arise: heat, chemicals, hot water, steam, and weathering. Rollers made of NBR (Perbunan): Nitrile rubber is a copolymer product made from acrylonitrile and butadiene. It is stable against oils, fats, and gasoline. Therefore, it is particularly used in mechanical engineering.

... leaving any residue upon later removal. Touch surfaces are effectively protected from scratches and mechanical damage. Surface hardness: 9H Shatter and break resistant: YES Flexible and bendable: YES Chemical resistance: very high (report available!) Temperature resistance: -35 °C to +130 °C Custom sizes available: YES Material thickness: 0.22 mm Protection effectiveness for display or touchscreen: very high...

...into canisters. The liquids are fed from storage tanks by gravity or pumps. ■ calibratable filling, both above and below level ■ quick cleaning of the valves (the area in contact with the product consists of 3 parts) ■ Quick changeover to other container dimensions and changing products ■ Simple operation by one person ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin...

... & backfill materials - Liquid soils or ZFSV (temporarily flowable self-compacting backfill materials) - Earth-moist concrete products - Extruded mortar systems - Construction chemical products In all areas, the thixotropic properties of Concresol® are utilized. As a rheological additive, the product has a controlled influence on the yield point, viscosity, and sediment stability of the mentioned...

... high pressure cleaners and temperature up to 120°C. These properties are, for example, in demand when used in the steel industry. Because our sensors are always flushed with rolling emulsion during operation, the chemical resistance of the materials used and a high IP class are also essential. They are also ideal for outdoor applications.

... behaviour, high load capacity, shock resistant, chemically resistant against acids and bases (ph-value 0-14), corrosion resistant. For technical details, please visit the product page on our website! Support material/Carrier material:1.4301 (1.4401 on request) Intermediate layer:Sintered bronze Sliding layer:PTFE Static load:≤ 250 [N/mm2] Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2.0 [m/s] Friction value:0,02 to 0,18 Temperature strain:–200 to +280°C Max. PV-value:1,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7...

...Electrodes are subjected to high chemical stresses and must exhibit excellent electrical conductivity as part of a galvanic system. For these applications, platinum and its alloys are also exceptionally suitable. If your application requires a modification of dimensions or alloy, we are happy to assist you in developing the right product as a custom solution. Standard materials: Pt/Ir 90/10...

... solutions with different functional and decorative requirements for the electronic, domestic appliances and chemical industries*. Our delivery program offers a wide product range, including a variety of colours and standard coating thicknesses. Standards are available in 1 ton lots on a short delivery time. *Please note: Due to the hardness of the anodic film, crazing can occur during extreme bending or forming. To minimise the effect more information is available on request.

... thickness will be coordinated with you. Essentially, one should decide whether a disposable product is needed or if the protective curtain will be reused. Properties: - temperature resistant - chemical resistance - non-flammable - UV resistant Table: Standard spark protection fabrics - PU-coated - Mica-coated - Silicone-coated *Roll goods from 10 m, individual cuts available for an additional charge...

... has no cavities, gaps or external threads but has a smooth surface (roughness Ra < 0.8 μm) and rounded surfaces in contact with the wrench. PFLITSCH uses high-grade stainless steel 1.4404/AISI 316L to manufacture this product. All seals are made from plastics that comply with FDA 21 CFR §177.2600 and are suitable for being in contact with food.

... principle * Application examples: For pumping and circulating chemicals and solutions in surface treatment, chemical industry, and water treatment, etc. * Optional in stainless steel or polypropylene version Features & Benefits * Versatile applications * No leakage risk at the bottom outlet due to secure product extraction * Low wear * Stationary installation via flange possible * Also suitable for small container openings...

...-quality PTFE inner hose, which, due to its temperature resistance of up to +250°C, covers a wide range of applications. With the appropriate wire sheathing, these inner pressure hoses are particularly used when high demands are placed on chemical resistance and pressure load capacity.

... surface protection during stacking for parts cleaning. Special inserts and intermediate grids for parts cleaning, e.g., in grid baskets. - Easy to clean - Reusable multiple times - Resistant to many fats, oils, acids, solvents, and moisture - Precisely cuttable - Shock-absorbing - Pressure-distributing - Product and position remain visible through the mesh - Air circulation - Recyclable or residue-free incineration - Special grids for high temperatures - Special grids for chemical cleaning solutions Color: black or white Material: Polypropylene (PP), Polyamide (PA) Temperature resistance: up to 130 °C...

... up to 12 mm Dimensions: width: 500 – 2200 mm thickness: 1.0 to 12 mm roll length: 20 / 50m Standard blanks for customers available Available: standard goods available in 20m rolls in stock special materials and dimensions on request Use: Gates, Industry, Separation of production and storage areas, Cold stores, Blinds, Soundproofing, Splash guard, Seals, Vibration protection, Bullet-trapping plates, Underlay for equipment, Lining of collection containers, Chemical industry, etc. Characteristics: good mechanical properties broad chemical compatibility low wear high transparency cold...

... industries and various applications, including: • Machinery and plant engineering • Automotive industry • Construction • Solar technology • Aerospace industry • Screen printing • Food industry • Chemical and pharmaceutical industry • Oil industry • Electronics • Architecture • Art...