chemical pumps Germany

... obtain a pumping solution for your entire distillation process with just one pump. More than 600 pumps of this type are reliably operating across a wide range of cannabis applications for many of our US customers. This robust and reliable pump series is used worldwide in demanding processes within the chemical and pharmaceutical industries. Actuation: with electric motor Self-priming: yes Technology: external gear Application area: for the chemical and pharmaceutical industry Other features: for pharmaceutical applications...

...The HiScroll series consists of three oil-free and hermetically sealed scroll pumps with a nominal suction capacity of 6 – 20 m³/h. The pumps are particularly distinguished by their high performance when evacuating against atmospheric pressure. Their very compact design, as well as their extremely quiet and low-vibration operation, further set these pumps apart. Therefore, they are ideally suited for use in quiet working environments, such as in mass spectrometers, research institutes, or leak detection systems.

...We offer you, among other things, pumps with single- or double-acting mechanical seals. The chemical pumps type N1/N2 with mechanical seal (GLRD) complete the product range of GEKO-Pumpen GmbH.

Since its founding in 1954 by Karl Lutz and the establishment of nearly ideal production facilities in Wertheim, it has been possible in recent years to develop this brand into a synonym for complete systems related to the filling and packaging of liquids. Today, the Lutz corporate group includes powerful medium-sized companies from various industries with locations both domestically and internat...

... PERIPRO® hose pump, you can efficiently transport and dose corrosive chemicals such as hydrochloric acid, sulfuric acid, or iron chloride under strict safety regulations. The dosing accuracy of the hose pumps is less than one percent deviation, making them particularly precise.

... this field, but the most common one is the two-rotor pump. Leistritz screw pumps are used to pump clean or slightly abrasive, low and high viscosity fluids with lubricity from poor to good, such as: additives, bitumen, resins, crude oil, greases, benzenes, adhesives, silicates, isocyanates, tar, polyols, asphalt, paints/varnishes, paraffin, polymers, and various other chemical products.

...To avoid chemical reactions such as curing or crystallization during the dosing process, any contact with metal in the material-contact area of the dispenser has been eliminated. The materials used have been carefully selected: on one hand, with regard to chemical resistance to adhesives and other fluids, and on the other hand, for maximum resistance to physical wear from abrasive media. Highly...

... F 570 eccentric screw pump in 1000 or 1200 mm, collector motor F 458-1, chemical and food-grade hose, discharge elbow, joint clamp with seal, and barrel screw connection PP. Flow rate: max. 30 l/min Lifting height: max. 50 mWs Viscosity: min. 1 mPas - max. 25000 mPas Outer pipe diameter: 53 mm Immersion depth: 1,000 mm, 1,200 mm Material outer pipe: stainless steel Container: 1000 liter IBC, 200 liter barrels...

... variety of types including centrifugal pumps, centrifugal pumps, metering pumps, screw pumps and more. These pumps are suitable for a wide range of applications, be it in the chemical industry, mining, food processing, water treatment or other industries. High-quality construction and materials: Our industrial pumps are made from robust materials and manufactured to the highest quality standards. They feature a durable construction that ensures reliable performance even under demanding operating conditions.

...Replacement injectors for jet pumps in the chemical industry...

...With operating pressures of up to 1,000 bar, the Yseries pumps are ideally suited to a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. Due to the small size and low weight, they can be easily installed in unit with very small base frames. Medium:Water Operation:Without engine...

...Displacement pump hermetically sealed, without mechanical seal. Dry self-priming even in ATEX areas. Ring piston pumps without mechanical seal. ATEX certification, capable of dry running even in EX areas. Self-priming, CIP-capable, can draw from vacuum or pump into vacuum. Product recovery. Hermetically sealed: without mechanical seal dry self-priming: less product loss...

Bürkle develops, produces, and distributes manual sampling systems, filling devices for aggressive liquids, as well as laboratory equipment and laboratory supplies made of plastic. Over 2,000 products are sold worldwide through trading partners. The main sales tools are an attractive shipping catalog printed in 5 languages and the online shop. Bürkle's customers are primarily active in the indust...

...Air-operated diaphragm pumps made of plastic, stainless steel, aluminum, for oil, water, chemicals, FDA, ATEX for various applications. Air-operated diaphragm pumps for the food industry Air-operated diaphragm pumps for the chemical industry Air-operated diaphragm pumps for plant engineering Air-operated diaphragm pumps in stainless steel Air-operated diaphragm pumps in PVDF Air-operated...

...Stainless steel pumps for the food industry, chemical industry...

...Piston metering pumps with positive displacement for dosing chemical products with high yield and accuracy. The piston metering pumps are made from materials that are compatible with most processes where a product needs to be dosed into a hydraulic network or storage, such as in the food, textile, and chemical industries, as well as in water treatment, agriculture, etc.

...Verderair Pure compressed air diaphragm pumps - self-priming industrial pumps for pumping chemical and abrasive liquids in the industry.

...The Lagoa series is designed for the dosing of various products in the chemical, environmental, food, and pharmaceutical industries.

...Features: - capacities up to 6000 GPM - heads up to 700' TDH - External impeller adjustment - Renewable shaft sleeve - Heavy duty shaft and bearings - Available in stainless steel - Cast iron bases available Applications: - Paint systems - Filtration systems - Paper pulp - Municipal systems - E-coat systems - Wastewater - Oils - Chemical processes...

...Plastic submersible pumps from the KTF and KTB series are suitable for a wide range of water transfer issues. Furthermore, these pumps can handle a variety of chemical liquids. The pumps operate without seals. Impellers: semi-open Media: industrial water; warm, cold, with and without chemical additives, distilled, deionized Flow rate: up to 400 l/min Head: up to 42 m Medium: Industrial water Actuation: electric Start: submersible Technology: centrifugal Application area: for the beverage industry, for the printing industry Other features: compact, multi-stage, for cooling systems, plastic...

...Speck-Triplex offers system solutions for a wide range of applications. According to customer specifications, complete high-pressure units and pumping systems are manufactured with Speck high-pressure plunger pumps for various applications involving liquid media. Versions in brass, spheroidal graphite, bronze, NiALBz (marine-grade), 1.4301 (AISI 304), or 1.4571 (AISI 316) for aggressive liquids are available. The sealing materials are tailored to the specific application. All components are high-quality branded products.

... milestone is set as a forward-looking, efficient, and reliable pumping system. It withstands everything. Chemical Standard Pump made of Plastic Extreme Durability Maximum Safety Long-lasting and Robust Significantly Improved Service Life...

...Piping of pumps in the chemical industry. The pipe material used is PE100 butt-welded in dimensions DN65 (D75) to DN200 (D225).

...The standard pump made of stainless steel 316 in monoblock design pumps water in a temperature range up to +120°C. The Lowara e-SH standard pump transports water, even with slight chemical contamination, in a temperature range from -30°C to +120°C. The corrosion-resistant design ensures long service life in industrial processes.

... single and double-acting mechanical seals » highest chemical resistance, even at high temperatures up to +150°C » robust, thick-walled construction, solid stainless steel casting (no thin-walled deep-drawn sheet metal) » low maintenance due to optimal adaptation to the pumped medium » durable and wear-resistant, various designs for almost all operating conditions » open impellers (i.e., solids up to 3...

...KAMAT High-Pressure and Process Pumps: Versatile Solutions for Industrial High-Pressure Applications. Whether for industrial cleaning, mining, process engineering, or hydraulics – we offer flexible customization, reliability, and top performance. Our pumps adapt to changing requirements and can be operated both horizontally and vertically. With tailored solutions and global distribution, we are your partner for peak performance. Contact us for customized high-pressure solutions that meet the highest standards. Trust KAMAT for your smooth operation.

...-quality mass flow meters, volumetric counters, or scales, dosing valves in single or double-stage designs, and dosing pumps in various configurations are selected. The automation and visualization of the dosing systems provide extensive comfort for operational handling and quality assurance. Recipe controls and trend recordings can be implemented, offering a high level of product safety.

...into canisters. The liquids are fed from storage tanks by gravity or pumps. ■ calibratable filling, both above and below level ■ quick cleaning of the valves (the area in contact with the product consists of 3 parts) ■ Quick changeover to other container dimensions and changing products ■ Simple operation by one person ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin...

... life - Wear- and corrosion-resistant materials - Low pulsation delivery, low shear stress - Rotary micro annular gear technology Applications - Chemical processing - Industrial and plant engineering - Packaging - Dispensing... Flow rate: 0.048 - 28.8 ml/min Smallest dosage volume: 30µl Displacement volume: 48µl Differential pressure range: 0 - 0 - 5 bar (73 psi), max. 40 bar * (max. 580 psi...

... applied in the chemical and pharmaceutical industries as well as for conveying granulates in plastics processing and the food industry. The pneumatic conveyance process is carried out by suction and compressed air, i.e. by vacuum or positive pressure, and is mainly used when sensitive substances are transported. Heavy substances such as cement, sand or gravel are mainly transported by positive pressure.