Germany, Diepholz
... than 150 Pa pressure loss. The heat recovery system provides a total thermal output of 450 kW at a temperature difference of 30°C, while only 16 kW is required for the supply air fans. Supply air filters with automatic filter monitoring ensure clean, insect-free supply air. Through an adiabatic cooling system in the supply air duct, cooling of up to 8°C is achieved with an energy input of only 1.5 kW.
...The heat-resistant duct-mounted fan CFI can be continuously adjusted and is installed both horizontally and vertically in the vertical or horizontal section of the chimney duct system.
Germany, Donauwörth
... Construction: The compact housing is made of aluminum die-casting for high efficiency and maintenance-free operation. The galvanized fan is designed for both suction and blowing of air and is connected to the frame by steel struts. The BDRAS series is characterized by a low-noise design with an additional intake grid and can be installed in any position. Accessories: The optional speed control is possible via a step switch. Key data: Discharge duct box dimensions W / H in mm from 56 x 42 to 93.5 x 90. Airflow from 90 - 600 m3/h. Maximum air temperature 40°C.
... come into play. These extraction systems are tailored to the specific needs, work processes, and local conditions. This particularly applies to the size, shape, and equipment of the respective work area. The extraction system is connected to a fan or a filter unit via a duct. The resulting emissions can be either removed by the fan or filtered out by the filter unit.
Belgium, Temse
...This circular motorised damper is suitable for ducts with 125 mm. The position of the damper blade can be set via Modbus RTU communication or a 0-10 V signal. The enclosure has an airtightness class D according to EN1751. To ensure this classification aluminium tape should be wrapped on the seam between damper/duct. The unit needs 24 VDC supply voltage. We recommend using Sentera 24 VDC power...
Serbia, Belgrade
...Makro Teknik’s flanges are produced for maximum robustness, tightness and easiness of assembling at air ducts applications. Galvanised steel in line with TSE 820 standart is used at production. Non liquid, not frozen butyl mastic for tightness, is injected to suture where duct is placed. At design of 20-25 mm flanges additional measures are taken to seal. At flange diagram, it is shown connection types, air duct and flanges assembling methods at diagram according to DW 144 – EN 1507 standarts.
...Manufacturing of ventilation ducts in various shapes and materials. Constructed and tailored precisely according to the specific project.
...Folded and welded ventilation ducts and fittings for channels made of galvanized steel, aluminum, and stainless steel V2A and V4A. We produce folded and welded air ducts and fittings in Germany from: - galvanized steel - aluminum - stainless steel V2A - stainless steel V4A - suitable for room air technology systems (RLT) - manufactured according to DIN EN 1505...
Switzerland, Oberwil-Lieli
...Plastic-coated Universal Adhesive Tape Gaffer Tape, Duct Tape, Gorilla Tape... The little all-purpose wonder has many names: Our new premium fabric adhesive tape Efficiently usable in climate and ventilation technology as well as for challenging covering tasks on slightly rough surfaces and temporary fixings (films, etc.) ✔ Wide range of applications (construction, repair, and more) ✔ High...
Poland, Żory
... can be connected to building management systems via ModBUS. The UVC-190m lamp features a built-in UV radiation sensor, which informs the user about the lamp's operating parameters, the need for bulb replacement, or any malfunctions. Lamp specifications: Application: air disinfection Power consumption: 220 W Voltage: 230 V, permissible supply voltage 197-265 V AC or 176-277 V DC Lamp lifespan: 9,000 h according to the manufacturer, 14,000 h according to measurements UV-C bulbs: 2 x 95 W Philips Mounting method: ventilation duct Lamp dimensions: 614 x 160 mm Mounting hole: 571 x 114 mm...
... protection against high temperatures is optional. (Terminal box – IP 55) SPEED CONTROL Can be provided with an optional control device. APPLICATION AREAS The BDKF series fans offer excellent solutions in vital, industrial, and commercial areas; in ventilation systems. Vital: Bathrooms, toilets, swimming pools, gyms, warehouses, etc. Commercial: Cafés, bars, restaurants, shopping malls, schools, offices, factories, buildings, warehouses, nightclubs, hotels, workplaces, etc. Industrial: Equipment cooling, workspace and area ventilation, etc.
Türkiye, Bursa
...CAR AIR DUCT HOSE NBR...
Switzerland, Kaiseraugst
...With the fan design, the sound emission in the duct can be estimated for the respective operating point. Based on these values, the required silencers are designed. In general, a distinction is made between - Round silencers with and without a core. Advantage: compact design, pressure stable - Slot silencers Advantage: high insertion loss, low pressure drop, easy to clean...
... delivery. OPTIONS: Long duct housings, built-in inlet nozzles. ACCESSORIES: Counter flanges, support feet, flexible sleeves, protective grids, vibration isolation pads, inlet nozzles, diffusers, circular silencers, check valves.
...Ventilation ducts are used to transfer air (warm or cool). Thermal insulation of ducts is applied to: - Prevent condensation of water vapor: - Provide fire protection - Absorb noise generated by air movement (sound insulation) - Reduce heat loss - Protect against external factors. When addressing issues related to preventing condensation on the surface of ducts, the quality of design and...
Germany, Detmold
...Buy duct fan for windowless rooms Good ventilation in private households or in business and workspaces is especially important when air exchange through windows is not possible. Diameter: 100 mm Airflow: 220 m3/h / 185 m3/h Power: 35 W, 32 W -Diameter: 125 mm Airflow: 310 m3/h / 275 m3/h Power: 40 W, 38 W -Diameter: 150 mm Airflow: 530 m3/h, 410 m3/h Power: 69 W, 62 W -Diameter: 200 mm Airflow: 1200 m3/h / 955 m3/h Power: 154 W, 133 W...
France, Villeneuve-Saint-Georges
... insulation solutions from Staff and Promat. BUT THEN, HOW DO WE DEFINE EXACTLY WHAT STAFF DUCT IS? This duct is designed to limit fires that may break out in business premises. However, it also has a very important effect against the toxic fumes that may emanate from it. Indeed, whether in ventilation ducts or other conduits, whether electrical or simply passing through several...
...We supply perforated plates and duct construction panels with various cores and coatings. The primary application is the production of supply and exhaust air ducts in animal husbandry. Our supply air perforated plates have excellent air distribution due to the special design of the holes. The number of holes and their distribution on the plate are based on the specifications of the ventilation...
Germany, Bohmte
...We offer you tested and energy-efficient flat duct systems, ventilation pipes, wall boxes, and everything related to exhaust technology. Proper exhaust management contributes to a healthy indoor climate and is designed to relieve your living space from steam, grease particles, food vapors, and humid air. The contaminated air is expelled outdoors.
Portugal, Leiria
...The girandola is a wind extractor that provides significant assistance in the extraction of fumes, as long as it is not exposed to high temperatures. It is also suitable for use in ventilation and air renewal in warehouses, attics, restrooms, etc. It utilizes wind energy to create a "vacuum" effect in the duct, thereby forcing the airflow.
...Highly flexible multi-layer ventilation duct made of pure aluminum foil (aluminum foil hose) with an embedded steel wire spiral. Length: Standard length 10 m, compressed to approx. 0.6 m (packaged in cardboard) Intermediate sizes: Standard sizes available from NW 65 to NW 610 Temperature range: temperature resistant from -30° C to +140° C, flame retardant Delivery time: partially available from stock or 1-2 days...
Germany, Lauterbach
... always rely on our static calculations. 3D representation, sizing, and construction with inspection openings and accessories are, of course, approved by you before we proceed with welding and finishing. We master all common welding techniques and finishing methods such as coating, hot-dip galvanizing, painting, powder coating, pickling, and grinding. We deliver complete solutions and can also assemble on request – even in connection with pipe and duct systems. Your advantage? Thanks to our in-house production, we can provide your ventilation system practically turn-key and to...
...duct air heaters, pipelines, heat furnaces, exhaust gas purification systems, and filter systems. Options -various standard flanges -insert module for existing ducts -complete solution with control and electronic monitoring -with additional fan -finned tube radiators Ø 8.5 mm with fins Ø 25.0 or 50.0 x 25.0 mm possible...
Germany, Köln
...Our certified ionizers can significantly reduce viruses, germs, and bacteria, as well as eliminate odors. The duct-mounted devices and ionizers from AGU Umwelttechnik are used in the ventilation technology of buildings, rooms, and air handling systems for disinfection, improving air quality, odor neutralization, and the breakdown of pollutants. Ionized air is also applied in the processing of...
Germany, Hannover
...EVAPCO provides steam coils for duct-mounted systems, ventilation units, and industrial process heating systems. Steam coils can be designed for both horizontal and vertical installation, delivered with fans or as a special version, depending on customer requirements. With EVAPCO's CoilCalc selection program, your custom selection begins. CoilCalc allows the designer to input all values and then adjust the unit to the required conditions. Material selection, fin configuration, fin spacing, number of fans, and many other features can be selected.
Germany, Setzingen
... renowned manufacturer of equipment for the ventilation industry, offers a comprehensive range of duct folding machines, flanging machines, folding formers, round machines, and folding pressure machines. Beading and Flanging Machines RAS provides highly innovative solutions for beading and flanging in sheet metal work and ventilation system construction.
Türkiye, Istanbul, Turkey
... 304 Quality Stainless Steel Construction With/out Duct Models WxDxH: 1000x620x770 ( without internal Fan unit ) Perforated Working Area Led Light with Light Intensity Controller Fan with Fan Speed Controller Custom Built Availability...
...The measuring probe is in the form of the lance (KSK-I01a) with a length of 2000 mm and includes a single oxygen sensor at the tip of the lance pushed in compost. The lance tip has a rounded head, so as pushed in, it does not poke through compost components. Oxygen sensor implemented on the basis of ZrO2. The device also available mounted on a ventilation duct compost pile (KSK-I01b with a length of 197 mm) The sensor mounted in this version using the threaded flange M18x1.5.
Luxembourg, Bascharage
... IP55 - Stackable model - Dimensions: L 210 x W 510 x H 510 mm - Weight: 12.5 kg - Noise level (at 3 m): 53 dB(A) Single-layer ventilation duct reinforced with a spring steel spiral, Usable from -20 °C to +100 °C, polyamide structure coated with PVC, external anti-abrasion protection.
France, Chessy
... storage. Construction in double-walled 12/10 steel. Mineral fiber insulation of 20 mm thickness according to NF EN ISO 1182 standard. White epoxy paint RAL 9010. Standardized symbols "harmful", "toxic" or "flammable" (to be specified at the time of order). Adjustable retention shelves on rack systems. Ventilation through lateral internal duct with openings at the top and bottom (Ø 100 mm). Model: Series 3/5 In stock: 2 Products...

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play