flow rate measurement

... temperature circuit connection 3/4" IG 1 x main connection 1" IG Available in three temperature variants: Operating temperatures up to 100°C, up to 160°C, and up to 180°C Max. flow rate per circuit: 25 l/min or 50 l/min...

..."flowtherm Ex" is a multifunctional handheld device with a data logger for accurately measuring flow, flow velocity, temperature, pressure, and other parameters in the Ex area of Zone 1. Measurement Parameters: - Flow velocity - Volumetric flow rate - Standard volumetric flow rate - Mass flow rate - Temperature - Other freely definable physical quantities, as long as they can be measured or...

...The SIKA oval gear flow meters are designed for measuring the volume and flow rate of liquids. They are used in applications such as lubricant monitoring.

...Electromagnetic Process pressure: 1 bar Process temperature: Up to +120°C Installation: Built-in flange Type of conveying: Free fall, also for descending pipes Flow rate: Up to 300 t/h Pipe diameter: Up to 200 mm Output: 4 to 20 mA, ModBus, ProfiBus...

...The SFS01 is particularly suitable for low flow velocities up to 3.5 m/s (in gases). It shows very fast measurement results of the flow rate as well as the flow direction. The Silicon Flow Sensor SFS01 offers three main characteristics: — Very fast response time <5 ms — Very low energy consumption — Easy system integration including temperature compensation Well-adapted channel...

... is possible to measure residual oil vapor content, residual humidity, flow rate, and pressure accurately and with excellent precision. Our monitoring and data logging make it accessible to you and your employees at a glance, ensuring process safety and the quality of your products.

...The first flow meter with a touchscreen display and backlighting impresses with its simple, user-friendly display and operation, the multilingual interface, and its compact design. Thanks to the rotating eccentric disc and a magnet, it enables accurate measurement of the volumetric flow rate, measuring thin to medium-viscosity media such as water and mineral oils precisely, quickly, and above all...

...The LM OG TA lubricant oil meter is used as a flow meter in lubrication systems for engine workshops and combined heat and power plants. The maximum flow rate can be up to 35 l/min.

... and control between 0.5-40T / S. Motor controlled feeding and integrated measurement system, dosing, flow rate control in percentage or kg / h, precise flow measurement and control with Loadcell, There is no pneumatic control in Akar scale. The system has no air dependency. The desired product mixture is made according to the values ​​entered from the flow scales placed under the wheat silos from the computer or the operator panel on the scale.

... measurement range. 0 - 25% O2. 0 - 10,000 ppm O2. 0 - 20,000 ppm CO2. 0 - 12 Mg O2 / liter. A color touchscreen interface allows for the visualization of values and traceability of measurements in XLS format. A pump with a flow rate of 0.5 L/min enables measurements within a range of ± 10% of atmospheric pressure. An additional dissolved oxygen probe can be connected to this unit. The built-in battery allows for measurements with an autonomy of 8 hours.

...Variable volume flow controllers are used to maintain air flows under changing pressure conditions. A complete shut-off is possible through an integrated sealing shut-off valve. The effective pressure measurement is carried out by an integrated Venturi nozzle. The volume flow can range from 50 to 4500 m³/h. Measuring nozzles are available in nominal diameters of 110-400 mm connection diameter. Standard materials available are PP and PVC. Special materials are available upon request. For more information, please visit our website or contact us directly.

...Without any doubt, the smallest high-performance flow tester on the market (240 parts/min). Specially adapted for automatic and semi-automatic test machine, the D26 Speed has a full range of specifications at a very competitive price. Valves, lighter, pneumatic and hydraulic fitting Continuous flow measurement Flow rate 500 l/h – 2 bar (other range possible) Wide range of measurement 8 programs...

... equipped with a needle valve for precise flow value adjustment. The DK37 M8 is supplied with vertical or horizontal process connections for NPT or G threads, flange adapters, and numerous other connection options. To provide a constant flow rate even with variations in inlet or outlet pressure, the VA flow meter is also available with flow regulators. It has approvals for use in hazardous areas...

...The differential pressure transmitter DPT 100 has been especially designed for fast test processes in leakage and flow measurement, where a fast response time and high sampling rate are necessary. The compact design of the DPT 100 facilitates the use in standardised applications, e. g., and the installation in 19“ Rack. The DPT 100 with optionally RS485 interface uses the communication...

...The Trotec PC200 Particle Counter features 6 measuring channels (0.3, 0.5, 1.0, 2.5, 5.0 and 10.0 μm) with three counting modes (concentration, cumulative and differential) and counting efficiency of 50% at 0.3 μm and 100% for particles beyond 0.45 μm. The internal pump allows flow rate of 2.83 l/min (0.1 ft³/min) and the zero count is < 1 particles / 5 min with a coincidence loss of 5%, 2...

... critical nozzles can be combined, depending on customer requirements. EP offers different designs for the register: Drum Design, Block Design & Register Design. Another variant is a mobile system: The EP SMF® - Mobile Flow Calibrator - a compact measuring system for flow calibration. EP Ehrler Prüftechnik manufactures single nozzles in the flow rate range from 0.005 to 2000 m³/h. In addition to our standard range, we also manufacture customer-specific nozzles that are perfectly designed for your application in compliance with DIN EN ISO 9300*. ...

...The URM type float flow meter and switch operates based on the well-known float measurement principle. It is used to measure flow in closed piping systems. The medium flows through a glass measuring tube that expands conically upwards from bottom to top. The float is lifted as a result, indicating the respective flow rate on the scale attached to the measuring cone. To monitor flow limit values...

...Conception Conical orifice at 45° on the upstream side and parallel outlet on the downstream side Type of fluid For very low ReD starting from 25; clean, very viscous fluids and/or low speed; low flow rate. Characteristics Measurement accuracy maintained even at very low ReD Type of measurement Pressure taps 0/0...

... force introduction components are required to ensure that the line of force action aligns as precisely as possible with the geometric axis of the force sensor being tested (concentric loading). It is also very important that no lateral forces or moments are applied to the force sensor. Measurement accuracy: ± 0.001 % of full scale. Measurement rate: 0.1 ... 1200/s (DC); 0.1 ... 2/s (AC) Sensor type...

... in air ducts and air conditioning equipment. Because of the calorimetric mode the media temperature is also monitored. Flow rate measurement In addition to reproducibility, flow-rate measurement demands a defined degree of accuracy. The flow meters continuously and accurately measure a defined volume of a fluid per unit of time and are suitable for applications where qualitatively consistent process results and a steady supply of fluids is essential. We offer flow meters with calorimetric, magnetic-inductive and Vortex measurement principle for various areas of application.

...The emtechnik flow meter was developed especially for measuring air with different flow ranges. All sealing surfaces and threads are produced without seams. On request we are also able to offer flow meters customised to specific customer specifications with special measuring ranges and measurement acquisition (annular proximity switch or reed switch). To do this we need details regarding medium, pressure, temperature, measuring range, viscosity and density. Flow Rate Air:0,2-2,0l/min...

...Inline measurement of viscosity/flow rate with a transmitter version - The straight single-tube design of Promass I provides inline viscosity measurements combined with mass flow, density, and temperature measurements. With its innovative remote transmitter Promass I 500, it maximizes installation flexibility and operational safety in demanding environments. Heartbeat Technology ensures compliance and process safety at all times.

...The Valve-Tronic Plus™ is designed for use in highly demanding industrial applications that require accurate flow control and measurement. It can function as a stand-alone controller for basic applications or become an integral part of a process control system for automatic flow control. FEATURES • Large LCD displays actual flow rate, totalized flow, valve position, alarms, and diagnostic...

...The mobile measuring device RP-30 (Radar Profiler) creates a speed profile of rivers and streams to determine the flow rate in conjunction with cross-section and level data – a very useful measuring instrument, especially for use in flood situations.

...Fully automatic end-of-line tester for checking the functionality of oil pumps under specific operating conditions Measurement principle: Test specimen is integrated into the oil circuit Application of parameters (pressure, temperature, speed) Collection of measurement data (flow rate, speed, torque…) Properties: 100% testing High testing throughput, short cycle time...

... optimize yields and procedures. The BlueVCount consists of a volume measurement unit with a 1mL cylinder, equipped with a special oil and a magnetic piston. Every time 1mL of gas passes through the cylinder, it is counted and relayed to the integrated display or via Modbus RTU to software (e.g., BlueVIS). A minimum flow is not necessary.

...Elcometer 4695 Contrast Cards/Drawdown Cards These cards feature proven diagonal stripe patterns with a strong visual impact that highlight variations in opacity. They are commonly used to determine the hiding power in conjunction with drawdown and coating methods. Flow Rate Cards (Card 8H) have an area of exactly 0.1 square meters (approximately one square foot) and are designed for testing the hiding power of applied coatings with specified flow rates according to ASTM Method D 344. Leneta Card 8B: 194 x 289 mm Leneta Card 8H: 286 x 438 mm...

... pleasing stainless steel enclosure. Versatile production capabilities: from 250 to 4000 liters per hour High quality: high-pressure stainless steel pump User-friendly: PLC microprocessor interface with a 7" touchscreen. Digital flow meter: for precise measurement of production and wastewater Adjustable: adjustable flow rate using a stainless steel needle valve Monitoring system: pressure sensors...

... safe, reliable and low-maintenance recording of flows is required. This includes e.g. all automation and chemical industries in the most varied areas, such as cooling circuit monitoring, monitoring the flow rate of process fluids, monitoring metering processes or also for pump protection.

...IFA Technology considers your individual requirements and builds customised dosing systems for you. Volumetric dosing is carried out on a quantity basis by measuring the flow rate of liquids or bulk materials. Application-dependent measuring systems are used in our volumetric dosing systems. These make it possible to provide the specified quantity of material at a defined point in time in a defined ratio. The continuous inline dosing via flow measurement technology or dosing pumps with linear characteristic curve enables recipe-accurate dosing of liquids and bulk materials in a small space.