Bolts - Import export

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully.

For high demand hoisting and carrying tasks in safety-relevant areas (machine construction, load handling equipment, lifting tackle). The CE mark is impressed into the ring bolt. F2 permissible load under max. 45° per ring bolt. On request: Certificate of conformity.

The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimised geometry and a surface finish of Ra ≤ 0.8 µm. The quick and easy installation due to a pre-installed sealing washer rounds off the overall package.

Combining leading-edge tech. & PUNGKANG Co., Ltd’s unique know-how, an Enterprise that creates the future of Automotive parts industry. PUNGKANG Co., Ltd was established in 1974 as an enterprise which professionally manufactures Nuts for Automotive industry. Together with the continuous development of the Korean automotive industry over the past 48 years, PUNGKANG Co., Ltd has taken root deeply thru. unceasing efforts as an enterprise specializing in automotive parts that produces Nuts & Forged products and supplies to domestic / overseas automotive companies which satisfy high technology and quality level of the automobile industry.

Steel Bolt manufatured by CNC turning, Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Wireway Fastener material: aluminum alloy 6061-T4 thread grade: rolled/cut 3/8-18 NPSM thread x 0.39 +/-0.04 inch size: cap outer diameter 0.995-0.997 inch, height 2.50±0.03 inch cap slot - width 0.062±0.010 inch, depth 0.093±0.010 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

wireway fastener material: brass round cap, groove width 0.062±0.010 inch, depth 0.093±0.010 inch externally threaded, NPSM 1/8 inch, 0.38±0.03 inch diameter: 0.593±0.010 inch, 0.318±0.010 inch through hole diameter 0.218±0.010 inch, for wireway length: 1.31±0.03 inch chamfer 45°±30′ Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Lens Frame Fastener material: stainless steel 303 chamfer - both ends 0.09±0.03 inch thread grade: rolled 3/8-18 NPSM thread x 0.82±0.03 inch size: cap outer diameter 1.00±0.03 inch, height 1.38±0.03 inch cap groove - width 0.062±0.015 inch, depth 0.093±0.015 inch through hole diameter 0.39±0.03 inch, for wireway Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Attacht 4 of these U-Bolts 400mm to your wooden pallet very easily , to secure your load. Very interesting for securing loads of round materials, like pipes. Made of heavy duty 8mm galvanized steel.

Attacht 4 of these U-Bolts 200mm to your wooden pallet very easily , to secure your load. Very interesting for securing loads of round materials, like pipes. Made of heavy duty 8mm galvanized steel.

Barrel locks with return spring can be easily screwed onto doors, hatches and hoods. These locks are available in two different variants: bevelled upward or bevelled downward. The bevelled surface allows the application to be closed or opened without actuating the grip. The integrated return spring always brings the grip back to its original position. Type of operation: When the grip is pushed, the barrel moves into the open position and the door can be opened. When the door is pushed to, it is locked automatically by the bevel.

Parallel keys are used for the implementation of shaft-hub connections. These are positive connections which are used to transmit torque.

The rubber buffers are widely-used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery.

Ball lock pins are used for easy fastening or joining of components or workpieces. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. Release the button to lock the balls and secure the connection. Form A is suitable for applications where high demands and precision are required. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.

Ball lock pins are used for easy fastening or joining of components or workpieces. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. Release the button to lock the balls and secure the connection. If required, the ball lock pins can be fitted with a retaining cable. The hardened, high-tensile stainless steel pin permits extreme loads with low wear. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application.

Industrial shock absorbers are maintenance-free, ready to install hydraulic components. They have an integrated fixed stop. The adjustable version enables precise adjustment to the desired dampening level. After installation, operate and adjust the shock absorber a few times until the desired braking level is achieved. Exceeding the max. energy intake per hour is possible if temporarily disconnected or the shock absorber is cooled with cylinder exhaust air. The installation position is arbitrary.

Individual filled gas springs are excluded from replacement. Gas springs are maintenance-free, self-contained systems that are filled with nitrogen under high pressure. For end-of-travel damping and lubrication, a defined amount of oil is also contained inside. The gas springs contain a nonreturn valve in a threaded pin on the pressurised pipe, which allows the pushing force to be lowered at a later time. Gas pressure springs in the sizes 04/12 and 06/15 must be stored and installed with the piston rod extending downwards. As of size 08/19, storage and installation in any orientation is possible. Keep in mind, however, that end-of-travel damping is effective only when the piston rod extends downwards. As a consequence of the physical properties when filling a gas spring, a tolerance range of ±5 % results for the rated pushing force. Gas springs are filled with nitrogen under high pressure and under no circumstances should they be opened or overloaded.

Suitable for emergency stop and continual use. Energy reduction: 25% to 45%. Dynamic force absorption: 218 N to 3730 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Application: Linear slides and linear guides, pneumatic cylinders, furniture industry, machines and plants.

Suitable for emergency stop and continuous use Energy reduction: 58% to 73% Dynamic force absorption: 870 N to 35190 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Fastening screws: Special cap screws with hex sockets, material 44SMn28 (free-cutting steel SAE 1144) electro zinc-plated: M6x9, M6x10, M8x14, M12x18, M16x26 ISO 4762 cap screws with hex sockets - 8.8 steel, black: M3x6, M4x8**, M5x10** ** With DIN 125 washer, electro zinc-plated steel. Application: Linear slides and linear guides, pneumatic cylinders, handling equipment, machines and plants

Screw on rubber impact buffers can also be used as equipment or machine feet.

Rubber buffers are widely-used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery.

Elastomer buffers are characterised by high load capacity, long service life and high economy due to being entirely maintenance-free. They also provide outstanding protection for persons and machines since the buffers do not rupture when overloaded. They are used to insulate and dampen air and structure-borne sound and offer progressive buffering characteristics with sustained excellent performance. They are also resistant to grease and oils and, in terms of performance and quality fulfil the requirements of the standard ISO 10069-1.

The receiver bush is for quick and safe insertion of ball operated lifting pins. They offer an easy and reliable installation in a variety of lifting materials. Also for use with thin walled materials and blind holes. They are corrosion resistant with low wearing.

Quick and easy lifting device with swing shackle and safety bar against unintended release. The balls are unlocked by pressing the push button. When the push button is released the balls are securely locked. Corrosion and weather resistant. High tensile, hardened pin for extreme loads with the high wear resistance. Temperature range max. 250 °C. CE certified. Values X max, and F1 with 5x safety factor. Accessory: Receiver bushes 07784.

Ball lifting pins are quick and simple lifting devices with swing shackles. The balls are unlocked by pressing the push button. After releasing the push button, the ball is securely locked. Protected against corrosion and weather-resistant High-strength, hardened, extremely durable pin. TÜV-tested. Values X min., F1, F2 and F3 with 5x safety factor.

Shackles and bolts may vary in colour. Paint may cause the thread to be stiff.

Reinforced threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired. This makes it possible to recover scrap and rejects of expensive products. Reinforced threaded inserts are suitable for use in various materials, including light metals and casting. Inserts with internal threads larger than M6 are supplied with four locking pins instead of two. Permissible deviations: The medium tolerance class applies to the threads listed, i.e. 6H for nut threads and 6g for bolt threads. Other dimensions ±0.25 mm. With reinforced threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.