Air blowers - Import export

Features Pressure loss is minimal to enable high spray impact performance. Long thin slit with tapered nose is suitable for installation in a narrow space such as between support rolls. Drastic energy saving is achieved by switching from compressor-using type. Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment

Features Large spray coverage. Air spray volume can be adjusted by changing nozzle tips. Capable of steam spraying. Applications Cleaning, Dust suppression, Drying, Air curtain Humidification, Temperature control, Moisture control

Features Air booster nozzles producing powerful air blow with small air consumption. Taking in surrounding air, EJA series provides ten times more* blown air than the volume supplied. Graduated scale markings on the nozzle allow for accurate adjustment of blown air volume and intake air volume. Made of stainless steel with high durability. *1/4F EJA 300 Applications Blowing off dust/paint dust, Rejection of inferior products, Blowing off drying Blowing extraneous liquids or powders off of items passing by on the conveyor belt

Features High impact solid stream of air flown from eight holes. Compact design, lightweight. Quiet operation with noise level reduced by more than 10 dB (A) compared to conventional one-hole air nozzle. Max. allowable temperature: [Plastic] 60℃ (140 °F), [Stainless steel] 400℃ (750 °F). Applications Blow-off drying: Blow-off drying for engine block Blowing off: Rejection of inferior products Cooling: Pinpoint cooling for molded plastic

Features Long flat air nozzle with 100 mm–1,400 mm in spray width. 13 spray width types are available. Max. allowable temperature: 400℃ (750 °F) Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block Blowing off dust/paint dust/debris, Blowing off inferior products (rejection of inferior products) Cooling: Pinpoint cooling for molded plastic Others: Detachment, Cleaning, etc.

Features 42-mm wide air nozzle. Taking in surrounding air and boosts multiplied air flow. Uniform distribution resulting from the unique flat design. Max. allowable temperature: [Plastic] 120℃ (245°F), [Stainless steel] 400℃ (750 °F) Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block Blowing off dust/paint dust, Rejection of inferior products, Blowing off dust for steel plate Cooling: Pinpoint cooling for molded plastic

Pneuflex air blow guns (air dust guns, pneumatic blow guns, metal air blow guns, air blower), including metal air blow guns and metal air blow guns, which are often used to clean the dust , water and crumb.

we are a manufacturer of all types of commercial and industrial fans we're exporting our products to more than 37 countries.

Material Specially rolled 6063 aluminum profile. It is used as a suction or blowing grille in the ventilation system. Surface Coating Standard coating is natural aluminum anodized. Optionally, electrostatic powder paint can be made.

Golta Air blowers are widely used to water plants for water treatment.

Hot air blower with ergonomic handle and adjustable temperature. Suitable for shrinking, drying, heating, activating, welding and bending plastic materials for various applications indoors or out. The temperature is electronically adjustable from 20 to 650°C. CE certified. Equipped with a metal carrying case.

Solar energy is the energy source of the future and solar farms are indispensable to capture this valuable resource. However, dirty or dusty panels can negatively affect solar energy production. At this point, Millie company comes into play with special air cleaning and rinsing attachments called "Blower Air Force".

Totally independent Aerator and Mixer. Air Provided by Blower with Variable Frequency Drive which can regulate oxygen supply from zero to maximum capacity; whilst retaining full mixing and oxygen dispersion capability therefore the units are ideal for SBR ASP & MBR applications.

Correct ventilation is not only an important prerequisite for a pleasant working environment, work protection provisions and regulatory directives make it mandatory in many areas.Proper room ventilation conducts harmful fumes and substances out of the room. The high pressure centrifugal fan TFV 100 is well-equipped for tasks such as transport of up to 4,000 m³/h air, even over longer distances and with back pressure.Owing to its extreme robustness, it is able to handle harsh working environments efficiently.The TFV 100 is available as standard model and additionally as a hire model. Benefits in practice: Extremely robust models with a high flow rate Splash proof type A (IP55) Deployment also possible in very dusty rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Stable characteristic curves and constantly high pressure

max. size 65 x 88 cm age 2005 jogger air table with blower air table metallized flap right and left Ref: KN230094A Please ask for price. We ship and install worldwide!

Grease lubrication of plain and rolling bearings in high-temperature range, where a mineral oil based grease cannot be used, e.g. on hot-air blowers and fans, autoclaves, drying ovens or systems in steelworks and foundries Advantages and benefits Drip-free hot bearing grease for a broad temperature range with high oxidations stability and moisture resistance Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum high-performance formula Broad range of uses outside normal grease performance areas

width 115 cm age 1986 computer program digital display air table with blower 1 side table right with air cushion Transomat TR 1 EL - 145-3 Delivery time: immediately from stock Ref: PO210172Y Please ask for price. We ship and install worldwide!

Lubrication of temperature-stressed machine parts, e.g. rolling bearings, friction bearings, slideways, chains, rollers or moving parts in hot forming, heat treatment or drying Dry lubrication, e.g. of kiln and rack-truck bearings, bearings of pouring ladles, converters or hot-air blowers at temperatures over 250°C Lubrication of plastic and rubber at normal temperature when the materials concerned are not resistant to mineral oil Advantages and benefits Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Broad range of applications at temperatures up to 200°C as paste, over 200°C to 450°C as dry lubricant Resistant to water, fuels and lubricants, chemicals and hydraulic fluids For best adhesion, clean the threads and sliding surfaces from dirt and other lubricants. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner.

width 115 cm age 2008 computer control with monitor touch screen colour screen air table with blower 2 side tables with airbed rear table cover Delivery time: immediately Ref: PO210136A Please ask for price. We ship and install worldwide!

Practical benefits: Professional quality "made in Germany" - Original Trotec fabrication Extremely powerful radial blower- max. 1.050 Pa - optimal for ventilation over long hose distance Adjustable air flow up to max. 1.250 m³/h Carrying and stackable construction Light but also sturdy design Foot and transverse rubber feet for vertical or horizontal installation Operating panel guard Dual counter for operating hours and energy consumption Cable box Washable air filter Can be used with the air hoses with diameter 100 mm, 50 mm and 38 mm Technical details: Free exhausting air flow without adaptor plates: 1.250 m³/h Air pressure max.: 1.050 Pa Blower levels: variable Mains connection: 230 V / 50 Hz Power consumption: 170 W Sound level (distance 1,5 m): 73 dB(A) Dimensions (L x W x H): 355 x 430 x 235 mm Weight: 6 kg

WELDING MACHINE FOR PLASTIC + 1kg OF PROFILES A plastic welder is a very useful device for everyone who needs to connect plastic elements in a short time. The welder has a smooth adjustment of the force and temperature of the blown air. It is equipped with an automatic cooling system after the end of work, which has a significant impact on the life of the heater. The temperature and airflow power are adjusted by means of knobs.TECHNICAL DATA: Infinitely variable hot air temperature: 200-480 ° C Air flow max: 120L / min Air blower: compressor - brushless fan Power supply: 220V Tip power: 60W Device power: 700W Length of the stock with the cable: 120cm Dimensions: 138 x 100 x 150 mmThe composition of the set: plastic welder 858 round nozzle 5mm round nozzle 7mm round nozzle 10mm square nozzle 13x13mm 5mm long nozzle, bent at an angle of 45 degrees 20 different binders = 1 kg

Blower turbo-massage (optional for the ELITE system) Once assembled, this optional introduces a supplementary air debit into the air base lines, supplied by a turbo-blower 1Hp. Activating the blower leads to air enrichment of the air-water jets and implicitly, to an energic, sportive hydro-massage. The optional is a standard endowment in the superior systems of ELITE system. Supplementary multi-LED spot (optional fot ELITE and ELITE TURBO system) The supplementary spot is the same type as the one previously described. The second spot has a syncronized functioning with the first one, increasing the intensity of the light show. The optional has a standard endowment in the superior systems of ELITE TURBO system. Optic fibre STARS20 illumination (optional for ELITE, ELITE TURBO and ELITE TURBO PLUS systems) The colored light provided by a multi-LED EFX22 module, installed in a dispersion body in the optic fibre, is transmitted through optic