Attaché cases - Import export

A special cleaner for throttles in fuel-injection systems and carburettors. When oil encrustations build up, throttles become misaligned. This is caused by the evaporation of oil and fuel, and can cause incorrect exhaust emissions to develop. Cleaning with Blast it! restores the default position of the throttles and gives you optimal exhaust control. Fields of application Suitable for throttles, intake manifolds and exhaust gas recycling ventilators of all petrol and diesel engines. Usage Remove the throttle, insert the extension tube into Blast it!’s spray nozzle and shake the can well. Then spray onto dirty areas. Allow about 5 minutes for it to take effect and then wash the residue out by spraying again. If necessary, wipe over with a cloth, then re-attach the throttle. In the case of 6-cylinder motors, firstly scratch out the incrustation on the intake manifold with a screwdriver, then clean with Blast it!. Batch quantity/Packaging units Batch quantity: 200ml spray...

Our fastening machines can be adapted or constructed to customer requirements. Benefits / Characteristics • (Special shapes for customer products. E.g. oblique section cases, round cases, attaching to solid wood, etc…) • Highly automated solutions • Disability adapted machines • Fastening solutions for fittings of all types e.g. picture frames, jewellery hooklets etc…

The SAP10/3P is a high quality machine for attaching hinges with fastening prongs from the roll. The hinges are attached to your product (cases, caskets…) using this machine. Benefits / Characteristics can be used for various materials (thin walled wood types, cardboard…) precision attachment of angular spring hinges consistent high quality ease of operation meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical data Dimensions: Length 1,000 mm Width 570 mm Height 1,000 mm Weight: ca. 75 kg Noise emission: 65 dB(A) Pneumatic operating pressure: 6±0,5 bar Cylinder compression force: 2 x 4700 N Work space (0720-2977.20): Length (A) 40 – 360 mm Length (B) 10 –infinite Length (C) 25 – infinite Work space (0720-3034.20): Length (A) 50 – 360 mm Length (B) 16 –infinite Length (C) 40 – infinite Work space (0720-2981.20): Length (A) 50 – 360 mm Length (B) 16 –infinite Length (C)...

The VAP5/4-G is a high quality machine for attaching handles with fastening prongs. The handles are attached to your product (cases, caskets…) using this machine. Benefits / Characteristics can be used for various materials (all types of wood, certain tinplates and plastic) precision attachment of handles consistent high quality ease of operation works with all Schmale handle models with fastening prongs meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical data Dimensions: Length 550 mm Width 570 mm Height 1,100 mm Weight: ca. 50 kg Noise emission: 60 dB(A) Pneumatic operating pressure: 6±0,5 bar Cylinder compression force: 7.300 N Handles: All Schmale handles with fastening prongs Work space outside dimensions: Length (A) unlimited Width (B1) unlimited Width (B2) unlimited Depth (C) unlimited Work space inside dimensions: Length (Ai) 50 mm to unlimited Width (B1i) 30...

The SVM1/1P is a high quality machine for attaching hinges and clasps with fastening prongs. The single hinges and single clasps are attached to your product (cases, caskets…) with this machine. Special features Changing the operating mode “Hinge fastening“ and“ Clasp fastening“ is very quick to carry out. Benefits / Characteristics can be used for various materials (all types of wood, certain tinplates and plastic) very low capital cost ideal for short runs precision attachment of the hinges and clasps consistent high quality ease of operation verschiedene Befestigungsarten möglich (Innen- und Außenanschlag, Flach- und Schiebedeckel) works with all Schmale hinge and clasp models with fastening prongs meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical Data Dimensions / Hinge fastening mode: Length 500 mm Width 750 mm Height 1,180 mm Dimensions / Clasp fastening...

Hot Plate for built-in. For flush fitting. Design: CNS 18/10. With loosely attached thermostat, with built-in casing. Continuously adjustable temperature control from 30-100°C. Thickness of plate 2 mm, setback 15 mm all around.

Design: Casing chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 90 °C by loosely attached ther mostat, with casing. 2 x GN 1/1 and 3 x GN 1/1 seperately adjustable.

Design: Chrome nickel steel 18/10. Basin indirectly heated (heater underneath basin bottom). Thermostat loosely attached with built-in casing. Basin rim folded 15 mm down all around. With water supply, drain and overflow for steady connection and automatic water level control.

Basin suitable for GN 1/1-200. Basin indirctly heated, heater underneath basin bottom. Thermostat loosely attached with built-in casing. Basin rim folded all around 15 mm or for flush fitting.

Water supply, drain and overflow for on site mounting.Incl. automatic water level control. Basin suitable for GN1/1-200. Basin completely and indirectly heated, heater underneath basin bottom. Thermostat loosely attached with built-in casing. Basin rim folded all around 15 mm or for flush fitting.

For flush fitting. Design: CNS 18/10. With loosely attached thermostat, with built-in casing. Continuously adjustable digital temperature control from 30-150°C. Thickness of plate 2 mm, setback 15 mm all around.

Heated, for plates and menu plates. Design: Casing and base made of chrome nickel steel, chromium steel plattform. Ther mos tat and on-off switch loosely attached, with built-in casing for mounting into site facing. Thermostatically adjustable from 30 – 90 °C. Capillary tube length 1800 mm. Capacity: approx. 50 plates. E.-Connection: 230 V-0,4 kW. Thermostat-built-in casing 107 x 175 x 80 mm, cut-out measures for built-in casing 87 x 150 mm.

Iceberg Euro is a highquality ice auger with a reliable seamless bit that provides fast and easy drilling. Its handle folding mechanism prevents backlash and makes it easier to get the auger into the working condition. Slipproof “warm” handles provide the best comfort during winter ice drilling. The carry case is attached. The removable head is made of durable composite material that withstands great loads and guarantees a constant cutting angle of the blades. Highquality steel radial blades are suitable for all types of ice and provide easy drilling. The main product features are • Clockwise rotation • Drilling diameter 130±5 mm • Maximum drilling depth 1336 mm • Total length in working position 1632 – 1832 mm • Bit length 853 mm • Transport Length 1172 mm • Wing Screw (Thread Size) M6 • Weight 3,4±0,2 kg

The Gronemeyer overhead conveyor is used for discharging or transferring products. Distribution occurs in cycle operation and across the direction of transport. Depending on the use case, it is attached to existing machines to save space, or is set up in a free-standing housing. Even large distances can be overcome with the machine. Technical data: —Distribution: 2 lanes —Distribution process in cycle operation —Lane distance: up to 3000 mm —Complete machine cover made of Makrolon with maintenance doors Optional equipment: —Independent electrical control system with congestion monitoring —Loading and unloading belts

Device details: ■ 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test ■ Robust and compact set including the device and an equipment case ■ Possibility to attach a thermometer directly near the sample ■ Measurement according to the standards IEC EN 60811-507 (Hot Set Test) and IEC EN 60811-508 (Heat Pressure Test) regarding sample attachment and weight attachment ■ Precise choice of weights due to practical containers ■ Simultaneous measurement of up to 3 samples Optional - Hot Set Test complete ■ Sample rack for heat pressure and heat elongation test ■ Laser gauge ■ Thermal heat oven UN55 Size (WxLxH): 585 x 514 x 784 mm (23 x 20.2 x 30.9“) Weight: 57 kg (125.6 lbs) Volumen: 53 l Air exchange rate: 8-20x ■ Thermal heat oven UN110 Size (WxLxH): 745 x 584 x 864 mm (29 x 23 x 34“) Weight: 74 kg (163 lbs) Volumen: 108 l Air exchange rate: 8-20x