Coats - Import export

Aquawood Ligno+ is a highly transparent coating for coating windows and doors made of softwood used outdoors. Thanks to the application of the HighRes® technology, a 5-year guarantee can be agreed for the first time. Based on the generation3 properties, by integrating the HighRes® technology it has been possible to create a coating system with outstanding resistances. In the areas of lignin stabilisation and UV protection, new standards are set by using special raw materials.

ADLER PUR-based coatings are modern solvent-based systems that meet the most demanding standards in furniture and interior decoration. The best resistance, both for chemical and mechanical stresses and strains, as well as ease of application and use are the special features of this type of coating system. ADLER offers the best choice of PUR-based coatings for the most diverse types of wood as well as the most varied design concepts. Premium quality and efficient use are always ensured in the process. In this manner, you can meet almost any need or requirement for the surface as desired by your customers.

ADLER water-based varnishes and paints may be referred to as milestones in this respect. It is taken for granted by ADLER today that all types of paints have excellent resistance to creams and grease. Even transparency and good grain accentuation come very close in appearance to that provided by customary solvent-based coatings. However, in doing so, it should not be overlooked that the modern water-based coating systems are superior to the solvent-based ones in several aspects, e.g. filling power, recycling capability and elasticity. Nonetheless, the most important is that ADLER water-based paints protect your furniture in an eco-friendly manner, and yet, reliably. In this way, we make considerable contribution to the maintenance of our living environment.

The front door not only acts as an important architectural design element, however, but is also expected to offer protection against the wind and weather. Heat, cold, damp and UV radiation from the sun, as well as wood-destroying fungi, are constant sources of stress for front doors. Under these aspects, ADLER has developed a highly technological and particularly resistant painting system. The new all-round improved Aquawood Protor System has allowed new standards to be set in the front door coating sector. The new generation boasts extraordinary scratch resistance, even greater hardness, excellent economy and more efficient drying. With Aquawood Protor, ADLER provides an innovative system, which meets the highest quality demands, whilst being easier to process and reducing material costs – ALL IN ONE. In the case of this system too, ADLER naturally builds on decades of experience in the research and development of water-thinnable surface coatings.

For 40 years, ADLER has been a pioneer in the field of water-thinnable window coatings. Today, ADLER offers its customers perfectly coordinated, water-based coating systems: a unique product package of paints and glazes, which achieve maximum stability, resistance and longterm durability through the use of the latest technologies. ADLER relies on the well-proven 3-coat structure. Thanks to sophisticated technology, it is more than equal to conventional 4-coat paint finishes, but unbeatable in terms of quality and cost-effectiveness. Window coatings from ADLER thus guarantee the highest quality and efficient processing.

Molybdenum sputtering targets are used for the manufacture of thin-film transistors used in TFT-LCD screens. Targets from Plansee are maximum dense, highly pure and show a homegenous microstructure. Therefore higher sputtering speeds, minimized particle formation during the process and homogenous layers are guaranteed. Available molybdenum alloys: MoTa, MoNb, MoNa, MoW You can choose between our single and multi-piece planar targets. Planar targets are available for all commonly used systems as well as to specific customer needs. Rotary targets are available too.

Tungsten layers are components of the thin-film transistors used in TFT-LCD screens. They are used wherever large screen formats, particularly high image definition and optimized contrasts are needed. But tungsten is also used as a diffusion barrier and a conductive connector in the microelectronics industry. Using the world's largest hot rolling mill for refractory metals, Plansee is able to produce the largest tungsten sputtering target on earth. The benefit to you of large formats: The coating process is more stable and the deposited layers are of higher quality. Thanks to the special forming processes Plansee's tungsten sputtering targets have a density of almost 100 %. As a result, your process benefits from a particularly high level of conductivity and time savings due to the excellent sputtering speeds.

Our ceramic coatings can also be applied to complex geometries with a very low heat input. The coating type CD1 is very insulating and can be used constructive also.

Multifiber coating and curing system for up to 12 optical fibers for inline operation Inline color coating and UV curing Coloring and UV curing up to 300 m / min Simultaneous coating of up to 12 fibersSuited for use in multifiber production lines operating at a maximum production speed of 300 m / minute and above. Coating unit with fiber entry guides, dust blower, and coating heads. Curing unit with one irradiator type M550, control electronics, cooling fan, and nitrogen flooding system including a nitrogen supply unit. FEATURES Simultaneous coating of up to 12 optical fibers. UV curing unit with one M&S designed irradiator. Suitable for production speeds of up to 300 m / min and above. Electrical heating system for coating heads. Pressure system for ink tanks.

Special high speed adapted ink jet printer with finely adjustable printhead support for marking bandmarks from one side on the fiber at speeds up to 1150 m/min. The usual arrangement allows bandmarking in line with the ink coating process, providing irradiator units after the ink jet printhead and the ink applicator. In case that no additio­nal UV lamp unit and only the UV lamp of the UV curing unit CCD1-K unit is available, bandmarking has to be done in a separate process (either bandmarking or ink coating). The microprogram of the ink jet printer is specially adapted for ultra high speed bandmarking with automatic control of a constant bandwidth over the full speed range. Band­mark pitch and interband distance for multiple bandmarks (double, triple, etc.) are easily programmable on the computer screen. LD - INK LEVEL SENSOR AND INDICATOR SYSTEM FOR INK TANKS Triggers a warning signal as the ink level drops below minimum.

Creative plaster is a natural marble plaster for modern and individual interior design. available in many different colours for a variety of techniques.