Automatic doors - Import export

schuifdeur, schuifraam, upvc ramen. pvc deuren. aluminium rolbesturing. Met 17 jaar ervaring in deze branche bedient Fettahoglu Pvc de beste pvc-ramen en -deuren voor onze nationale en internationale klanten. Met CNC-machine en deskundige werknemers staan ​​we klaar om u en uw klant van dienst te zijn.

Door Closer is a product that facilitates the quiet and safe closing of door. Used for various doors world wide such as medical facilities, offices, transportation equipment. Automatic door closing using the spring and hydraulic operation. Doing away with an arm provides a refined touch of door.

If automatic doors do not open against a wall or screen then a barrier should be installed to protect the side approach. We have options to suit most needs including stainless steel posts that suit our proximity sensors too.

All edges; are framed by special designed aluminium. 8mm tempered glasses or laminated glasses. Number of panels; 1 + 1, 1 +2;1 +3 ,tor 26 mm thickness 1+ 1, 1+2 ; panels tempered or laminated, secured engine drive , and thanks to the gear chain , it has been transported jambs without imposing any burden to the glazing units, within wide angled coupling corded staple characteristic , it provides insulation and wind resistance and operating vertical. Mechanism is stabilized by double- row gear and double- row chain ; the safe bearing capacity tor load ; the maximum panel weight is; (170 kg)x 20 times (Min) BECKER Motors Ltd. (Made in Germany) 153,9 mm X 140 mm (Width X Lenght), inbuilt multipurpose insulated and lock concealed screw. Switch controlled or remote control . Eager tor bonding and fast curing, not including extra solvent; lmplemented on neat surface. Sound lsolation: along horizontal scale, to the interior and exterior side of upper box; 20 mm thickness, 150 DNS

1.Loadbearing lower case profile within base surface of width is ; 54,5 mm, aforesaid other loadbearing profile; within upper case is 46,4 mm. Existence of these profiles inside; there are two channels operating separately from each other performing the duty of carrier. 2.Through vertical height of lower carrier; cubicle waterspout is implemented. The height of initial cubicle is 11 mm and is inclined. 3.By courtesy of trio cubicle profiles; the exterior is out of sight and air ingression is prevented directly. 4.Under favour of lenghtwise hair cord channel at case profile , hair cord might be implemented continuously. 5.Within moving wing profile; thanks to centering channel ; axial run outs are prevented. Additionally; carrier profile ; preserving any excess sealant within joint of glass and aluminium. 6.Aluminium caps shutting down the wing profile outrightly moreover plastic cap is not used within wings. 7.

We manufacture all kinds of metal doors in different models.

Graphix is an all-in-one station for marking small to medium-sized parts. It uses fibre laser technology. It provides maximum safety for your operators. Its marking possibilities are multiple: alphanumeric characters, logos or Datamatrix. Its advantage? An intelligent software with a material database to make markings in only 2 clicks! Simply select the material of the part and the desired marking effect. This makes it possible to do away with the complicated settings required to carry out laser marking, and thus to make it accessible to everyone. But that's not all! Technomark has also developed a marking head with an on-board camera that allows the rendering and positioning of the marking on the screen. You no longer need to move the part to ensure that the marking is correctly positioned, it adapts to your part because everything can be controlled from the screen. Accessories are also available to meet all your needs: automatic door, rotating axis, side openings...

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

Pallet based automated car parking system RESPACE Pallet based technology The pallet based automated car parking system RESPACE is an interesting solution for creating up to 50 parking spaces. Drivers park their car on a pallet in a cabin. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The door of the cabin closes and the car is transported downwards by lift. From there the car standing on the pallet is brought to a free parking space via roller conveyors. The pallet based parking system RESPACE is characterized by a very compact design. From the lift the pallets with the vehicles are moved directly to adjacent parking spaces. Car parking and removal follows according the puzzle principle. The car park has 60 parking spaces and is used as a hotel car parking, but also available to the public.

45 mm coplanar door system for commercial premises and buildings. Available in 2 versions: Millenium 2000 door: with face fix hinges and 2 or 3 high resistance pins capable of supporting up to 180 kg. per sash. Millenium 2000 automatic door: Allows doors to be made for automatic opening sliders. This new solution that optimises the stay spaces, has been specifically designed to resolve entrances with high transit (offices, shopping centres, hospitals…) as it guarantees good pedestrian circulation as well as security in emergency situations. Possibility of 1 or 2 sashes, with or without fixed lights, presenting the double option of a motor in order to generate the opening: one at 12 cm. high and another being minimalist at only 7 cm high.

This new fire resistant door system that has a fire resistance classification of EI260, resolves the security requirements in case of fire, allowing for the compartimentalization in fire sectors in the building and the evacuation of the users. Comprising of 80 mm section straight line coplanar profiles, 2.2 mm thick and a 35 mm thermal breaking zone, it offers a 60 minute fire resistance time thanks to the utilisation of retardant insulation materials that do not combust in the profile chambers as well as intumescentant gaskets that dilate and bio-soluble paper in the glass area. With a frame transmission value from 1.4 W/m²K, it reaches unbeatable thermal features and with its large glazing capacity having a free space of 56 mm, it guarantees a maximum accoustic insulation. Possibility of joining with fixed lights, incorporation of opening gearing with anti-panic function, automatic door closers and handles/hinges officially approved in the sectoring of fires.

E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Other information Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0 E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E2 micro E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors. E2 micro For restricted spaces One and two-piece E-Chains®, from 5 mm inner height High torsion resistance Smallest inner heights and bending radii Mounting brackets with strain relief optional Small pitch for silent operation Cable-friendly interior Low weight Large pins for a long service life Favorable internal/external dimensions ratio B07/B09 in two parts - Can be folded out in outer radius due to integral hinges Typical industrial sectors and applications General construction machinery Models (micro E-Chain®), Automatic doors Vehicles Measuring machines Electronics Handling systems Pick and place robot iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0

are an excellent option that GENIUS offers to the sector. It is suitable for very intensive use . The highest quality materials are used in the production. The Engine Unloading Mechanism is located externally on the body. The Control Unit is housed under the top cover; Thanks to its rotating mechanism, it provides great convenience and safety in assembly. It has an anti-crushing system. Healthy operation is ensured with deceleration options suitable for arm length. The concept of classic Flasher is avoided with the Lighting placed in the existing channels on both sides of the body. In the original Arm option, Lighting on the Arm is optionally available. The Articulating Arm Apparatus works perfectly; It creates an ideal solution for busy indoor parking lots. It also works in case of power cuts with optional dry type batteries.

Today, automatic sliding doors have the design and technology suitable for you to use the fast and safe passage opportunity in the most economical way. It offers wide entrances without loss of space in tight spaces. Automatic sliding doors are the doors compatible with today's technology, which are the most widely preferred in business centers, public buildings, industrial facilities, schools, hotels, hospitals, factories, shopping centers and even residential areas and provide comfortable passages for the use of millions of people every day. There are different opening forms to best meet the needs in the buildings where it is used, and it offers flexible alternatives for use in accordance with the project.

Multi-purpose ceiling opening pallet doors are made of steel material. Parking entrances, Garage Entrances and Service entrances etc. It is an ideal system for motorized and manual use. The 510 mm panels that make up the door are connected to each other with Galvanized steel, panel color electrostatic painted steel or stainless steel (Optional) hinges. Panels with a thickness of 40-42 mm and a thermal coefficient of 0.78 W/m2K are composed of two steel, aluminum or stainless steel plates filled with polyurethane foam of 40 kg/m3 density. There is a polyurethane filling inside the panel, which increases the wind resistance and heat insulation. Thanks to EPDM gaskets, high insulation is provided on the sides, bottom and top, against rain and wind. The doors, which are balanced with the spring system, can be easily opened and closed manually without the need for a motor. The doors have a safety system (optional) against spring breaks (Optional) and rope throws.

Spiral Doors are door systems in which Extrusion, Sandwich Panel or metal framed canvas partitions are collected in a specially designed spiral snail slot without contacting each other and move up and down in a channel at a speed of 2,5 m/s. It is used to ensure safe and fast traffic flow inside or outside the facility . In this way, it provides savings by reducing time and energy loss in enterprises. Paw Turbo Spiral Doors, which give a monolithic appearance with aluminum extrusion or polyurethane filled sandwich panels and aluminum struts, are not only used for industrial facilities, but also as garage doors for prestige buildings with very heavy vehicle traffic with their aesthetic and modern appearance . Turbo Spiral Automatic Doors, which allow the door to operate in harsh weather conditions with its partitioned structure and strong upright system

Thanks to its high usage performance compatible with all kinds of industrial environments, it is used in production facilities, aircraft hangars, shipyards and recycling facilities. Thanks to Paw-Maxi's special extruded aluminum rails, it not only guides the door body up and down, but also minimizes air currents from entering the usage area. The door opens automatically and closes with button control. According to the door system dimensions, the opening and closing speed is 0.15 m – 0.3 m/sec. Paw-Maxi Hangar doors consist of double-walled canvas and provide a high level of wind resistance with its reinforced body structure. The control panel is fully compliant with IP 65 standards. The most distinctive features of the door system require the least space loss in the installation areas of the door, and maximum use of your door passage area arises.

Hangar Doors are used in production facilities, aircraft hangars, shipyards and recycling facilities thanks to its high usage performance compatible with all kinds of industrial environments. Thanks to Paw-Maxi's special extruded aluminum rails, it not only guides the door body up and down, but also minimizes air currents from entering the usage area. The door opens automatically and closes with button control. According to the dimensions of the Hangar Door system, the opening and closing speed is 0.15 m – 0.3 m/s. Paw-Maxi Hangar doors consist of double-walled canvas and provide a high level of wind resistance with its reinforced body structure. The control panel is fully compliant with IP 65 standards.

Thanks to its high usage performance compatible with all kinds of industrial environments, it is used in production facilities, aircraft hangars, shipyards and recycling facilities. Thanks to Paw-Maxi's special extruded aluminum rails, it not only guides the door body up and down, but also minimizes air currents from entering the usage area. The door opens automatically and closes with button control. According to the door system dimensions, the opening and closing speed is 0.15 m – 0.3 m/sec. Paw-Power XL Hangar Doors consist of double-walled canvas and provide a high level of wind resistance with its reinforced body structure. The control panel is fully compliant with IP 65 standards. The most distinctive features of the door system require the least space loss in the installation areas of the door, and maximum use of your door passage area arises.

<Product Features> Precision processing using various materials Ceramic quartz sapphire zirconia etc. <Product Specifications> We process and supply a variety of materials according to customer needs. <Product Use> machine chemistry optics <Remark> Purchase Price and Terms are negotiable. <Company Information> GEO Co., Ltd Founded as GEO Trading in 1996, we continuously developed and ungraded ourselves to become GEO Corporation. Based on the experience of importing and exporting Fine ceramics and optical products, we are now dealing with sapphire, semiconductor, and optical quartz in domestic market. GEO Corp. will endlessly strive to pioneer the overseas markets of fine ceramics and automatic door sensors. Website : www.geocorp.co.kr Tel : +82 32-323-6650

The industrial system Ti3000 will get more than 1.5% more yield as compared to other systems at the tried and tested FESSMANN quality! Completely made of stainless steel and built steamtight out of panels, the Ti3000 is universally usable according to your specific needs. The central unit technology also convinces with its flexibility and best circulation air outputs at short process times.Panel construction and central unit technology for best air and process outputs Higher flexibility in implementation of customerspecific product requirements by smooth fan speeds Higher system capacities by faster process times = higher yield Use of all known supply trolleys for industrial use possible Use of "overlength" supply trolleys and transport frames Automatic door opener serially included Automatic CIP cleaning system serially included

Our client wanted to integrate function and modern design to create an impressive 40 m2 office and meeting space in their plant facility. The customer worked with Prefabex to design and build a cost-effective custom In-plant modular office. Prefabex specified modular structure system to provide flexible, high-quality office space and reduce overall cost of the project. We finished a full solution, including internal and external finishes, automatic aluminum door, windows, and floor mounted protection barriers according to customer requirements. Prefabex designs and manufactures prefabricated modular offices for any application including sales office, in-plant office complexes and temporary jobsite/ construction offices. We are able to offer innovative modular office solutions that meet strict international quality standards. Prefabex modular offices supply facility owners’ absolute flexibility to interact swiftly and economically to the ever-changing needs of their businesses.

Our client wanted to integrate function and modern design to create an impressive 40 m2 office and meeting space in their plant facility. The customer worked with Prefabex to design and build a cost-effective custom In-plant modular office. Prefabex specified modular structure system to provide flexible, high-quality office space and reduce overall cost of the project. We finished a full solution, including internal and external finishes, automatic aluminum door, windows, and floor mounted protection barriers according to customer requirements. Prefabex designs and manufactures prefabricated modular offices for any application including sales office, in-plant office complexes and temporary jobsite/ construction offices. We are able to offer innovative modular office solutions that meet strict international quality standards. Prefabex modular offices supply facility owners’ absolute flexibility to interact swiftly and economically to the ever-changing needs of their businesses.

TOUCH SCREEN Just press the touch screen and the LW2 takes care of the rest! The door closes automatically, the laser is positioned at the right focus height, the marking is done in a few seconds and the door opens. This laser station does not require training. Just prepare your marking jobs and load them into your industrial marking solution via the USB port. COMPLETE SAFETY This laser marking system is certified as class 1 laser products, allowing use in unrestricted environments: integrated fail-safe relay, protective glass, door closure security, emergency stop, door fitted with sensors and anti-pinch system, integrated extraction and filtration solution to protect users from dust and smoke. Mechanic and electronics are fully protected in a sealed box. Integrated alarms and controls. FLEXIBILITY Large marking area with 3 sided door, marking of a wide variety of parts, from small to big parts, from simple to complex shapes. The LW2 is compatible with most of our laser sources.

When the photocell detects a signal, this mechanism detects a person or an object at the middle of the door and provides a complete security by keeping the door open. In case when anything is stuck in, it opens the door immediately. If a person or an object stucks in during the process of closing or opening the door, the security section provides security by reversing the process. Protection System The electronic system device provides an automatic protection against high voltages (except from the ones higher than 280 volt and sudden rises). The door is opened or closed automatically according to the signals from inside or outside of the sensor.

60 mm Insulation Thickness Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 65 Cm (GN 2/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Control Panel Automatic Water Evaporation System Electrical Automatic Defrost Stainless Steel Legs Adjustable For Height Automatic Lighting Inside When Door is Open Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC & % 65 Humidity

Inside Body PVC Coated Black Steel Outside Body PVC Coated Gray Steel 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Energy Saving LED Lighting Fan Cooling Digital Thermometer & Thermostat Automatic Defrost Locks on Each Door Legs Adjustable For Height Special Door and Hinges System Removable and Easy Cleaning Magnetic Gaskets Plastic Coated Steel Shelf Cooling Gas CFC Free : R 134 A / R 404 A Ambient Temperature: + 32oC SS Inside / Outside 430 Stainless Stee