Detector - Import export

Les extracteurs de particules métalliques Pulsotronic se présentent sous la forme d'un coffret de 450x450 mm. L’extracteur s’intègre directement sur le système d’alimentation par aspiration (air pulsé). Sa conception le rend indépendant des variations de vitesse, de débit, de densité et de taille du matériau. L'étanchéité de l´ensemble est conservée durant l'évacuation du matériau pollué par du métal. Diamètre de passage: de 38 à 70 mm Sensibilité: à partir de 0.3 mm en Fe Existe en versions: MESEP, DIGITAL+, M-PULSE Débit maximum: 3300 l/h Autres systèmes de détection de particules métalliques: Détecteurs plats pour installation sous ou au dessus des bandes transporteuses Tunnels de détection sur convoyeurs Détecteurs annulaires Séparateurs Réalisations spéciales Pulsotronic fabrique: Capteurs inductifs et capacitifs Appareils et lignes pour la détection et la séparation de métaux Systèmes de traitement d´images Capteurs magnétorésistifs Capteurs optoélectroniques et systèmes...

Connectique haute tension aux normes américaines Hubbellet accessoires de câblage et de sécurité. La technologie HubbellH-MOSS d’adaptation des capteurs d’occupation "auto-ajust" aux sensibilités et à la minuterie, fonctionne comme le suivi d’analyse environnemental et ce, de manière continue. Les capteurs enregistrent réellement la population, les modes de vie de votre lieu de travail et l’éclairage pour minimiser les gaspillage. Ils commencent à enregistrer au moment même de leurs installations. Puis, les capteurs deviennent "intelligents" de jour en jour et de semaine en semaine, et vous économisez de l’énergie ! Les capteurs s'installent: dans des bureaux, les toilettes, dans les salles de conférence et les aires de stockage. Vous changé vos habitudes ? Pas de problème, les capteurs H-MOSS détectent automatiquement les changements et gardent le rythme. Les capteurs H-MOSS fonctionnent également grâce à la photosynthèse. Caractéristiques des capteurs H-MOSS d’Hubbell   Capteur...

Pulsotronic propose une large gamme de détecteurs plats pour la détection de particules métalliques. Placés sous ou au-dessus d´une bande transporteuse ces appareils détectent les particules métalliques contenues dans les produits transportés. La sensibilité varie en fonction de l´épaisseur du matériau. L'équipement se compose d´un détecteur plat et de son unité de contrôle électronique. Certains appareils sont divisés en plusieurs zones. Largeur : jusqu´à 2 m. Sensibilité : à partir de 1.1 mm en Fe Sortie : TOR, unique ou par segment Séries : AR, SP, FS, FL, RE Autres systèmes de détection de particules métalliques Détecteurs plats pour installation sous ou au dessus des bandes transporteuses Tunnels de détection sur convoyeurs Détecteurs annulaires Séparateurs réalisations spéciales Pulsotronic fabrique: Capteurs inductifs et capacitifs Appareils et lignes pour la détection et la séparation de métaux Systèmes de traitement d´images Capteurs magnétorésistifs Capteurs...

Détecteurs pour l’automatisation et le secteur automobile. Pulsotronic fabrique Capteurs inductifs et capacitifs Appareils et lignes pour la détection et la séparation de métaux Systèmes de traitement d’images Capteurs magnétorésistifs Capteurs optoélectroniques et systèmes de mesure laser Systèmes de détection de couleurs Capteurs à ultrasons et capteurs acoustiques Capteurs pour inclinaison et accélération Développement de capteur spécifiques Les capteurs capacitifs détectent des objets conducteurs et non-conducteurs, solides ou liquides. Notre gamme comprend des capteurs cylindriques de M8 à M30, des capteurs rectangulaires de 25x50x10mm à 40x40x120mm et des références client-spécifiques. Les capteurs capacitifs sont utilisés pour le contrôle de niveau de remplissage et pour la détection, le positionnement, la surveillance et le comptage des objets. Ils sont surtout utilisés dans l’industrie du bois, l’industrie alimentaire, celle du plastique ou l’industrie chimique.

Assemtech Europe a développé une gamme d’interrupteurs et de détecteurs, soit standard, soit crée selon les besoins des clients. L’entreprise est agrée ISO 9000. La réputation d’ Assemtech Europe attire chaque jour l’attention de nouveaux clients en Europe et ailleurs. Assemtech Europepropose également plusieurs niveaux de commutation si nécessaire. Les produits Assemtech Europe sont tous entièrement personnalisables selon vos besoin. Nous sommes également en mesure d’offrir des trousses de flotteur en acier inoxydable. Ces kits DIY-Floats ont été conçus pour faciliter la construction d’un prototype ou de petite quantité d’assemblages et peut être vendu avec des boîtiers en acier inoxydable ou en tubes.

Détecteurs pour l’automatisation et le secteur automobile. Pulsotronic fabrique: Capteurs inductifs et capacitifs Appareils et lignes pour la détection et la séparation de métaux Systèmes de traitement d’images Capteurs magnétorésistifs Capteurs optoélectroniques et systèmes de mesure laser Systèmes de détection de couleurs Capteurs à ultrasons et capteurs acoustiques Capteurs pour inclinaison et accélération Développement de capteur spécifiques Caractéristiques du détecteurs inductif : Noyables ou non noyables dans le métal Haute température Boîtiers inox, métal ou plastique Portée augmentée Sortie câble ou connecteur Électronique déportée Pulsotronic propose une gamme étendue de détecteurs de proximité inductifs. Ceux-ci sont utilisés surtout pour des applications demandant une haute fiabilité, de hautes fréquences de commutation et une grande longévité. Notre gamme comprend des capteurs cylindriques de G3 à M40et des capteurs de forme quadrangulaire de dimensions 5x5mm à...

Assemtech Europe a développé une gamme d’interrupteurs et de détecteurs, soit standard, soit crée selon les besoins des clients. Les détecteurs de mouvement Assemtech sont très similaires dans leur conception aux matériels de détection d’angle. Le capteur est utilisé dans les applications suivantes : dispositifs antivol, coupure d'alimentation électrique, etc... Caractéristiques des détecteurs de mouvements Assemtech  : Conforme aux directives RoHS Tension: 60Vac Max. Switching Current: 0.25A Max. Capacité: 3VA Max. Contact Résistance: 30 ohms Max. Dimensions: Longueur 22.1mm (.870 in) Diamètre: 4.7mm (.185 in)

Détecteurs pour l'automatisation et le secteur automobile. Pulsotronic fabrique: Capteurs inductifs et capacitifs Appareils et lignes pour la détection et la séparation de métaux Systèmes pour traitement d’images Capteurs magnétorésistifs Capteurs optoélectroniques et systèmes de mesure laser Systèmes de détection de couleurs Capteurs ultrasonsoniques et capteurs acoustique Capteurs pour inclinaison et accélération Technologies de capteurs personnalisées Depuis plus de quarante ans, Pulsotronic est le spécialiste de la détection de particules métalliques. En plus des applications traditionnelles, Pulsotronic a développé des applications spécifiques. La gamme couvre tous les besoins de l’industrie. Pulsotronic est présent dans les industries agroalimentaires, la plasturgie, les mines et les carrières, la pharmacie, la chimie fine, l’automobile et les industries du bois. La gamme Pulsotronic comprend  Séparateurs Extracteurs Détecteurs plats Détecteurs annulaires Tunnels Matériels...

Wide range of ring metal detection sensors offering very accurated detection of magnetic and amagnetic metal particules ,we can detect down to 0,15mm small particules. Diameters of the ring sensors from 6 mm up to 300mm standart sensitevity and Hight sensitevities. Different parameters are to be defined together to choice the right product to reach the user wanted target. Don't hesitate to contact our specialists.

Metal separators Pulsotronic have various equipments to offer depending the raw materials wherein metal particules have to be eliminated in order to preserve the production equipment and avoid costly damages to them. Non obstand avoiding costly damages to the production equipment,the separators avoid long stops in the production process as lost of raw materials. The metal separators of Pulsotronic detect and eliminated magnetic and amagnetic particules of very small size in the raw materials before perturbing the production machinery.A very small part of the contaminate raw materials is eliminated beforhand filling the production machine and without stopping the production process . . Detection sensitivity is depending from different parameters and the choice of the equipment as to be defined togheter with the user who as made the choice to spare inexpected costs in his production. Our specialists are working closely with the producer who wish to built in a separator in his...

Assemtech europe offers you a wide range of sensors like detecting acceleration, level, angle, inclination, ... These products are free of mercury and respond to the RHOS directives. Assemtech offers customised products.

Reducing your energy costs is a difficult challenge faced by many industries in today’s economy. But, it doesn’t have to be. Undetected air or steam leaks, bearing failures and electrical panel faults cost you real money. There’s a way to cut these extra expenses from your energy bill. Preserve the health of your assets with the SDT200 ultrasound detector. Hear air leaks, trend and monitor the condition of your bearings, safely inspect electrical panels and schedule repairs on your own terms, long before they shut you down – all with ultrasound technology.

Downtime is a constant threat to your assets It’s a fact: All machines can fail. You need a solution that helps predict those failures early. Schedule your maintenance tasks on your terms. Let SDT help you take back control of your assets. Whether it’s in the form of equipment failures, unplanned production downtime or costly, last-minute repairs, you need a device that helps you maximize uptime, minimize costs and maintain control of your assets. The SDT270 ultrasound detector provides greater insight into the health of your assets. It helps you control energy costs, predict failures, improve product quality and increase overall production uptime. With your SDT ultrasound solution, you have the ability to predict and prevent failures before they occur. Stop relying on the reactive, fire-fighting maintenance measures of the past and start a proactive approach.

The FPDigit 22-100 is high dynamic range x-ray detector. With its 16 inch, more than 16 millions pixels and 100 µm pixel pitch, this flat panel will offer a dynamic range over 84dB with a frame rates up to 15 frames per second. The acqusition of image will be made by optical data communication. Improved reliability in inspections, costs reductions and environment cares are today the major factors driving the selection of Radiographic techniques. Due to the progression of silicon technologies and the level of current electronics, signals processing and transfer are becoming efficient and affordably priced to be used in NDT Industries. Flat panels are a combination of electronic and Silicon technologies which gives a direct conversion media for displaying Radiographic Images instead of using films. Flat panels are basically a two dimension array of detectors which sensitivity is 10 to 100 times greater than conventional films. This helps in reducing exposure time but also gives an...

The Mobi-X is a portable flat panel detector. Thanks to its battery and Wi-Fi interface, a digital inspection can now be done anywhere. Moreover the Mobi-X is very light, robust and ergonomic which makes it easy to be used in harsh environment and conditions. Equipped with an internal memory, the Mobi-X can to store images in order to allow the operator to unload them later. The Mobi-X is an X-ray detector with a 16-bit conversion for 100 μm² available in 3 different sizes. The acquisition software of the Inspection Suite comes with the equipment providing a user-friendly interface for the acquisition of images. The optional Image Processing Software (IPS012) makes it a complete solution. Flat panels are a combination of electronics and silicon, providing direct conversion support to display radiographic images instead of using the traditional film technique. This helps to reduce the exposure time but also gives an extended range of thicknesses using the same energy range.

The Mobi-X is a portable flat panel detector. Thanks to its battery and Wi-Fi interface, a digital inspection can now be done anywhere. Moreover the Mobi-X is very light, robust and ergonomic which makes it easy to be used in harsh environment and conditions. Equipped with an internal memory, the Mobi-X can to store images in order to allow the operator to unload them later. The Mobi-X is an X-ray detector with a 16-bit conversion for 75 μm² available in 3 different sizes. The acquisition software of the Inspection Suite comes with the equipment providing a user-friendly interface for the acquisition of images. The optional Image Processing Software (IPS012) makes it a complete solution. Flat panels are a combination of electronics and silicon, providing direct conversion support to display radiographic images instead of using the traditional film technique. This helps to reduce the exposure time but also gives an extended range of thicknesses using the same energy range.

With their large active areas, shock-absorbing hard protective sleeves, and light-weight form factor, the new GO-SCAN digital panels have been designed to meet NDT technicians’ requirements in terms of ease-of-use, ruggedness, and image quality.

With a resolution of 49.5 µm for an active area of 230×290 mm (9×11.4 in), the Go-Scan 2329 is the only detector on the market with such a high resolution to image size ratio. The image quality reaches class B (ISO 17636-2) for almost all your applications. High definition, user-friendly, light-weight, real-time feedback, shock absorbing! Featuring Teledyne DALSA’s high-resolution CMOS detector, and the lightest x-ray generator on the market, Teledyne ICM’s CP SERIES, the Go-Scan solution is without a doubt the all-around NDT solution when it comes to image quality, ease of use, handiness, and reliability.

For the first time ever, Teledyne ICM and Teledyne DALSA, two of the most advanced x-ray solution providers in the world, unite forces and reveal the first Integrated Digital Portable X-Ray Solution for Non-Destructive Testing… ever! High definition, User-friendly, Light-weight, Real-time feedback, Shock absorbing! By focusing on the end-user as the starting point of this incredible collaboration, we created a high-tech digital x-ray solution entirely designed around you! Featuring Teledyne DALSA’s high-resolution CMOS detector, and the lightest x-ray generator on the market, Teledyne ICM’s CPSERIES, the Go-Scan solution is without a doubt the all-around NDT solution when it comes to image quality, ease of use, handiness, and reliability.

For the first time ever, Teledyne ICM and Teledyne DALSA, two of the most advanced x-ray solution providers in the world, unite forces and reveal the first Integrated Digital Portable X-Ray Solution for Non-Destructive Testing… ever! High definition, User-friendly, Light-weight, Real-time feedback, Shock absorbing! By focusing on the end-user as the starting point of this incredible collaboration, we created a high-tech digital x-ray solution entirely designed around you! Featuring Teledyne DALSA’s high-resolution CMOS detector, and the lightest x-ray generator on the market, Teledyne ICM’s CPSERIES, the Go-Scan solution is without a doubt the all-around NDT solution when it comes to image quality, ease of use, handiness, and reliability.

SDT ULTRAChecker is an ultrasound solution designed to use the full range of both airborne and structure-borne 2nd generation ultrasound sensors. Versatile The SDT ULTRAChecker covers all airborne and structure-borne ultrasound applications. Connect any SDT 2nd generation ultrasound sensor. ULTRAChecker delivers end-to-end reliability through the 8 application pillars of ultrasound. Simple ULTRAChecker is the easiest to use detector we’ve ever created. Every push on its simple, 4-button keypad is displayed on its clear, colour display. Increase or decrease signal amplification while maintaining safe listening levels through volume-controlled headphones. Affordable Air leaks, over-greased bearings, failed steam traps, electrical faults, passing valves, the ULTRAChecker finds them all. Built with SDT quality, it’s offered at a price that will leave you speechless.

The HATCHecker is an ultrasound solution designed to test the integrity of vessels for weathertightness. Use HATCHecker to pinpoint the exact location of leaks in hatch covers. Focused Hatch cover leakage and wetting damage to cargo are a persistent problem in the marine industry. Confirm that hatch covers are weathertight and compliant with ruling regulations by using the new HATCHecker which includes cutting edge technology that makes both the T9 transmitter and handheld receiver light, compact, robust and suitable for use in the harsh marine environment. Simple The ergonomic and revolutionary design, vibrant colour display and limited number of keys make the HATCHecker easy to use, handy for travellers and allows for reliable leak detection with pinpoint accuracy on board ships. Affordable SDT’s quality and engineering, together with pioneering design and competitive price setting make the HATCHecker the most suitable and affordable solution for dealing with leaky hatch covers

TIGHTChecker is an ultrasound solution designed to verify the tightness of closed volumes. Focused Tightness integrity is an issue that plagues every industry. TIGHTChecker is an ultrasound solution focused on pinpointing leaks in any volume. Cars, trains, airplanes, buildings, cleanrooms… TIGHTChecker checks them all. Simple TIGHTChecker is so easy to use. Simply open the box, position the T-SONIC1, seal the volume and listen for leaks. TIGHTChecker’s crystal-clear sound and vibrant colour display pinpoints even the smallest leaks. Affordable With so many things to test, TIGHTChecker is in high demand. It’s low entry cost, versatility, and SDT quality make it the most affordable solution for testing everything that leaks. And everything leaks. Use the TIGHTChecker to pinpoint the exact location of leaks in vehicles, buildings, tanks, and ships. Designed for use with SDT’s ergonomic Flexible sensor and compact T-Sonic1 transmitter.

LEAKChecker is an ultrasound solution designed to find compressed air and vacuum leaks in noisy environments. Focused Compressed air leaks are a senseless waste of energy. Find and fix them fast with SDT LEAKChecker; an ultrasound solution focused on reducing waste and saving you money. Simple LEAKChecker is so easy to use. Simply open the box, switch it on, and start finding leaks. Enjoy crystal-clear sound in the headset and a vibrant colour display. LEAKChecker makes leak surveying fun again. Affordable Air leaks are an expensive problem… and LEAKChecker is the affordable solution. Built with SDT quality, it’s offered at a price that will leave you speechless. LEAKChecker, in combination with LEAKReporter, SDT provides clients with a platform to detect, log, and generate reports that show how their initiatives contribute to a more sustainable environment.

Peace of mind and reassurance for the operator Tightness Testing on Underground Storage Tanks and other Air Tight Compartments The ability to test for tightness with an ultrasound detector is extremely powerful and versatile. It is the only way to ensure that underground storage tanks are air tight. But that isn’t all that ultrasonic tightness testing can be used on. There are many things that need to be air tight. Like the engine or cabin of a car, large shipping containers or the bearing housing in a paper production plant. When somethings tightness integrity deteriorates one or two things can happen. Things can leak out, or things can get in. And whenever possible, it is advantageous to avoid either of these from happening. Fuel Leaking From Underground Storage Tanks Damage the Environment and Waste Valuable Resources Overtime the tightness integrity of underground storage tanks or other air tight compartments can deteriorate.

The Dylight X-ray inspection system is a true 'Plug and Play' solution, combining all functions in one compact unit. It is perfectly suited for the inspection of small products such as snacks, energy bars and sweets. - Hygienic design, following EHEDG principles featuring sloped surfaces and curved edges allowing easy inspection and cleaning, resulting in considerable time and cost savings; - Covering belt widths from 200 mm up to 800 mm; - A wide range of standard possibilities for ensuring product integrity and quality including checking completeness, determining product mass and determining compartment mass; - 15" color touchscreen display; - Combining high detection sensitivity with low power consumption

The freefall metal detection system Vistus ensures the reliable inspection and removal of metallic foreign bodies from any kind of food products in powder or granule form that is transported with the use of gravity through a pipe, e.g. milk powder, wheat, nuts or cornflakes. - Minimum installation height for easy integration into any application - Cost effective control of up to four search coils via one terminal - True In-Process Validation. This functionality guarantees correct performance testing