Change design - Import export

Wear warm and comfortable berets every day , discovering incredible comfort and their fashionable appearance. So far, you haven't had the opportunity to buy unique winter berets ? Now that may change. We designed and sewed the Karen model especially for you. This beret is made in Poland from high-quality yarn. The smooth surface without any decorations looks very elegant and delicate. The only decorative element is a shiny plaque with a logo, permanently sewn into the material. Women's berets – what clothes do they match? Are you not sure if your wardrobe has the right clothes that will allow you to wear a beret with them ? For decades, women's berets were worn more willingly than women's hats. They look best with elegant outerwear, such as coats and jackets. Winter berets do not have to be color-matched, they just need to complement each other.

Aside from the tried-and-tested uses of the E6, the new generation offers additional advantages which significantly simplify operation. In addition, design changes have improved accessibility to the interior, reduced weight and made assembly easier. - Option without camber (NC) simply by turning the inner link - Extremely quiet due to the small pitch and "brake" in the stop-dog system - (E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479) - Extremly low vibration - Low-abrasion connector system (no bolts and holes necessary) - Virtually no polygon effect, thereby "smooth rolling" operation - Smooth interior design for a long lifetime for cables and hoses - E61.29 series: cross bars on both sides can be snapped open and removed along the inner and outer radii - Weight savings approx. 30% compared to the E6 system - Cost-effective

Because of the complexity of controlling both parameters, every project is designed according to dimensions, material of the case, target values as well as ambient extremes in temperature and humidity. Although we do not have standard, off shelf units we are offering: Maxi T – Large units to control temperature and humidity inside the medium size cases (5-10 cubic meters) where main generator is located inside the machine room or other technical area some distance from the display case. See below. Mini T – small, compressor based unit for installation under or behind the display case. This unit can work with venting type or cooling/heating panels system. Will work with our Mini One or sometimes PMCG units. Special, thermoelectric device for very small cases. Will work with our PMCG unit. Please note that controlling temperature and humidity requires some changes to display case design and its very hard if not impossible

The IKO Linear Bushing is a highprecision linear motion rolling guide that performs endless linear motion in the axial direction while making rolling contact with the shaft. Cage, steel balls, and the like are built compactly in the external cylinder. Models are available in abundant sizes and can be selected according to the application. Since the steel balls are accurately guided by the cage, stable linear motion can be obtained with small frictional resistance. Simple Replacement for Rolling Guide With the shaft used as the raceway, guiding parts using conventional bushings can be changed to rolling guides without major design changes. Wide Variation For each dimensional series, standard, adjustable clearance, and open types are available with and without seals, which can be selected according to the application. Stainless Steel Stainless steel types are also available, with excellent corrosion resistance and ideal for use in clean rooms, such as in medical equipment

Cute baby socks with regularly changing designs. Comfy and warm by full-terry-quality and with anti-slip print under the sole. All models Ökotex certified (class I) and absolutely free of any harmful substances. With high proportion of skin-friendly cotton and a little polyamide for a longer durability.

System for bundling coin rolls of 5 or 10 pieces and shrinking in PE film. Elements of serial production: - Robust steel frame, painted grey in RAL 9006 - Welding frame with Teflon-coated heating rods with constant temperature controlled by temperature controllers with digital display - Motorised unwinding of the coil - Control generated by a programmable logic controller - Touch screen display - Storage of programmes - Automatic change of designations - Detection of the end of the spool - Translucent housing - Material according to current EC standards Foils that can be used: Polyethylene

We offer a wide range of high quality spring contacts or battery charging contacts. In our online catalog you will find over 300 standard spring contacts and connectors, which you can request directly from us with just a few clicks. https://katalog.nh-technology.de/ Completely custom designs or changes to specific specifications can also be made by us, including current rating, spring force, and plating. Our experienced team of engineers will help them design custom solutions that are perfectly tailored to your requirements. In doing so, we offer a variety of options, including different materials, surface coatings and connector configurations.

The latest development in lifting platform technology is based on mechanical drive technology using belts. Hydraulic oil is not required. Due to a patented catch system, BELT-LINE meets the safety requirements laid down in DIN EN 1570. The combination of exemplary positioning accuracy, smooth running and long service life is the reason the BELT-LINE is an economical precision solution, and not only for sensitive areas. Exemplary smooth running BELT-LINE convinces with a low noise and harmonious movement sequence, paired with maximum lifting speed and positioning precision. Minimum maintenance time and costs without hydraulic oil In particular in sensitive areas, the robust BELT-LINE technology with its long operating life is the best possible solution. The low-wear components can be quickly replaced due to the modular design. Excellent load change behaviour In the design phase, particular emphasis was placed on developing an excellent load change behaviour. The resilient suspension behaviour is only surpassed by LAWECO push-chain lift platforms.

SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.

Introducing our CF/PEEK filament, a game-changing material designed specifically for 3D printing. This cutting-edge filament combines the exceptional mechanical properties of carbon fiber (CF) reinforcement with the outstanding performance of Polyetheretherketone (PEEK) polymer. The result is a high-performance composite material that revolutionizes the capabilities of 3D printing technology. Our CF/PEEK filament offers a unique combination of strength, stiffness, and heat resistance, making it ideal for demanding applications across a wide range of industries. The incorporation of carbon fiber reinforcement significantly enhances the mechanical properties of the printed parts, providing exceptional strength-to-weight ratio and rigidity. This allows for the creation of lightweight yet structurally robust components.

The 22DT series has been specially developed for use in bivalent vehicles (volume flow measurement when running on natural gas) and is homologated for the automotive industry. However, it also has other industrial applications. The NTC or PT temperature sensor located directly beneath the steel diaphragm reacts more quickly to temperature changes thanks to its special design. The pressure transmitters are protected against electromagnetic fields up to 200 V/m and output the measured values as a ratiometric 0,5...4,5V analog signal. The connections of the temperature sensor are fed out directly.

Power and data requirements which increase rapidly in all types of factories, worksites and living areas are revealed in new building designs. Consequently, flexible, modular and modern infrastructure systems that can be adapted to the rapidly changing requirements in new buildings designs are gaining momentum.

Practical and stable cabinets with a changing table included, designed to ensure comfort in usage and durability. Intended for changing and dressing infants, as well as carrying out caregiving procedures. These are heavily used pieces of furniture, which is why they are constructed from 18mm laminated board. The cabinets come equipped with soft mattresses made from polyurethane foam, covered with easy-to-clean synthetic leather, as well as shelves or drawers. Dimensions: 104 x 75 x 113 cm

Traditional - This is a pillowcase that we have been using in Poland for 100 years, the design has changed and the yarn is more delicate for the skin. It looks elegant, it can be starched and ironed - which increases its durability.

Friction measurement on gear with cam recording with service case In order to reduce the frictional torque in a gearbox from the automotive industry, a measuring device that accompanies the development is required. With the DPFR-027, changes in the design can be measured directly on the product. This means that even the smallest improvements can be determined. The field of application of this test device is extremely diverse and can be easily converted to other applications. Thanks to the mobile design, tests can be carried out under different temperatures and climatic conditions. hand-held drive unit compact slim design constant load-independent test speed selectable direction of rotation and speed additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphic recording of the test sequence Storage of the test results in Excel

Mobile Mobile friction measurement for gear optimization 5 Nm or 30 U/min With the DPFR-036, changes in the design can be measured directly on the product. Even the smallest improvements can be identified. The area of application of this test facility is extremely diverse and can be easily implemented for other applications. The mobile design enables tests to be carried out under different temperatures and climatic conditions. Special features constant test speed independent of load selectable direction of rotation and speed Additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphical recording of the test procedure Simultaneous viewing of up to 20 variable test sequences from the database in color Option OK and NOK signal lights

The OBC-25SC grain cleaner cleans any grain using 8 sieves and an aspiration system with a built-in cyclone. The installation of a cyclone at OBC-25SC made it possible to solve the problem of cleaning the air emitted by the OBC-25SC fan from dust and light impurities (small parts of leaves, grains, insects, sand, etc.). Previously, this was solved by installing a separate cyclone near the OBC-25S, conducting an air duct from the OBC-25S fan to it, and installing a clean air exhaust system from the cyclone. This led to significant additional costs and required a large free space. Now OBC-25SC with an integrated cyclone that successfully copes with cleaning a heap of grain, saves space and money. Additional advantages of the grain cleaning machine OBC-25SC: - high productivity with small sizes; - simple, durable design; - quick sieve change; - automatic cleaning of sieves with built-in brushes; - can be equipped with lifts, cyclone pipe and wheels.

Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.

Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.

The Panel Track counter is one of our largest promotional counters, providing generous storage and as such is an ideal choice for most display or retail environments. Your counter panel will be shipped flat-packed and folded in one piece. To assemble your display, you will have to unroll the panel while fitting it onto the base. Then just fix the worktop on the structure and it will be ready to use. Once the counter is assembled, an open space is left at the back for you to store some personal belongings. This template allows your advertising to be changed easily, making it perfect for those who need to change their designs regularly. Where can the Panel Track counter be displayed? Due to its ease of assembly, this promotional counter can be displayed anywhere. Here are some examples of places where you can place yours: Fairs and events; Accessories and clothing stores;

The promotional counter is a marketing tool widely used by companies when they want to advertise their products or services in different places. Due to their ease of transport and assembly, these counters can be used several times in different places. Advantages of promotional counters: Bring companies closer to customers; Promote the brand and its services; Great tool for answering and clarifying doubts of new customers; Structure easy to transport and assemble. Are promotional counters a good investment? Of course! In addition to the advantages mentioned above, promotional counters are timeless, resistant and easy to move. These can also have their design changed several times, as their advertising is pasted on the counter and not engraved.

EGE metal detector system 3000 reliably detects metal parts in conveyed materials on conveyor belts. System 3000 consists of an analysis device and one or several compact detector coils. The MDS coils are mechanically extremely robust, resistant to climate change, water-tight and designed for outdoor use - for example on mobile equipment. EGE metal detectors reliably protect stone crushers, waste compactors, mills and other processing plant which could be damaged by larger metal parts.

WATTSAN 1530 TABLECHANGE is a high precision fiber laser cutting machine. It is equipped with an automatic change table. This design allows you to quickly change sheet metal while another workpiece is being cut. Such a system saves time and money for its owners. Such a machine has long been used in aircraft construction, mechanical engineering, light industry and medical equipment. The machine is equipped with a laser solid-state emitter to choose from: Max / Raycus / IPG. All three have proven themselves: Max is standard, Raycus is more expensive and better, and IPG is considered a premium series. All three types of emitters have a resource of about 100,000 hours. The automatic change table has a size of 1500×3000 mm for metal. The bed is made with a margin of safety, and the heavy weight dampens vibrations. Vibration mounts can be installed for added stability.

EFFECTS AND ADVANTAGES Prevents hip injuries from a high risk of falls. It is used as underwear or even as shorts. Due to its functional design allows changes in diapers more comfortably. COMPOSITION Fabric 65% polyester, 35% cotton. Polyurethane foam cushioning. MEASUREMENTS See data sheet. MAINTENANCE Remove the side pads before washing the fabric. Hand or machine wash cold. Low temperature griddle admits. Iron at low temperature. The use of bleaching agents and bleach is not permitted.

Injection simulation In order to limit unnecessary expenses and optimize the time of our customers we have introduced the injection simulations. It is a tool that simulates the plastic injection molding process. This software is a real plastic injection machine in itself, since it allows us to test different types of injection and thus, correct CAD models and make design changes before beginning

Flexible for small lot sizes Fast jaw change with quick change design and high repeatability – that is what makes the B-Top jaw chuck product line so flexible. Particularly for small lot sizes. Thus in most cases machining the chuck jaw to size is unnecessary. Conveniently adapted to your requirement Also the insert bushing system is configured for small lot sizes and maximum flexibility. It enables clamping devices to be conveniently adapted to your requirement: Closed with ejector, spray nozzles, or with variable end-stop. Just the way you need it. And the innovative lubricating system ensures improved clamping force behavior of the wedge bar principle.

We design market-changing products for startups who go on to become successful brands. Innovation and user-experience combined with knowing how to get products to production is where our expertise lies. Our expertise is working with startups and companies who want to work like startups. We’ve created a fast-paced innovative process that favours partnerships with clients where we can act as your in-house creative team and support the product development from strategy to manufacture. How is design for start-ups different from other design processes? - Our team is small but experienced, meaning you don't pay for a 4-person team of consultants when much less is needed. - We're ready to help you with low-volume production, even if you only want to make only 10 pieces as a start. - We work in close collaboration with you, with multiple approval steps, so you're always in the loop. - Design for unit price or for budget is no problem.

The ice chisel is suitable for conveniently chopping holes in the ice. The ice chisel comes with three pieces. It can be assembled with all three or only two parts, so the length of the chisel can be easily changed. Thanks to the original design of the stepblade, it is easy to effortlessly make clean holes. This ice chisel provides quick and accurate determining thickness and hardness of the ice. Thereby, it serves as a probe when moving on the ice surface, providing protection from falling through the ice. The chisel has a loop, which protects it from losing in the water. The ice chisel is light and foldable. It comes with a bag, which is why it is easy to carry. Technical Details Length in working position 1380 mm Length in transport position 520 mm Handle diameter 35 mm Weight 2.8 kg

Our Collet Chucks are available in a variety of different styles: Standard Cap Collet Chucks for Spring and Varibore collets. Available in short size to maximize your lathe work envelope. Quick Change Collet Chucks for Spring and Varibore collets, for when a quick change design is neccessary. Fixed Length Collet Chucks are high accuracy, and ideal for second operation. Pull Back Collet Chucks for Pull Back collets offer a compact design for improved tool access.