Construction maintenance - Import export

Food Sector Construction provides building maintenance services throughout the UK. Our capabilities cover the management and delivery of planned and responsive building fabric refurbishment, structural repair and minor civils works.

The all-rounder in the floor treatment! Strong on wood and ideal for sub-floor treatment. Sanding, padding, cleaning, milling - no problem for the SINGLE. It is the reliable single disc sanding machine for both, fine and coarse applications. Thanks to the dust-proof motor and the very robust metal gear, it can withstand even heavy loads. Due to this construction it is almost maintenance-free. The continuously adjustable working angle of the handle allows flexible adaptation to the user and room conditions. In addition, the ergonomically shaped handle allows the SINGLE to be fully controlled in every situation. An integrated adapter permits an external vacuum cleaner to be connected. Applications with the SINGLE: In addition to sanding, padding and dry cleaning of wooden floors, the single-disc sanding machine is also suitable for intensive dry underfloor treatment due to its sophisticated technology and robust construction in combination with the appropriate accessories.

COST EFFECTIVE SYSTEM FOR THE NON PRESSURISED STORAGE OF BIOGAS, LANDFILL GAS AND SEWAGE GAS In biological processes, gas production is not continuous. That is why the utilisation of gas (e.g. in a combined heat and power plant) requires an accumulator in order to compensate for fluctuations during gas production and to bridge downtimes for plant repairs and maintenance. Besides high functional and operating safety, other important criteria for the construction and operation of gas tanks include the economic aspects of investment and maintenance costs. DVGW approval held High functional and operating safety Highly accurate radar measurement enables exact content to be displayed Low investment and maintenance costs Quick construction Low maintenance Long service life Leak tightness can be checked

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat no costs involved Shape U    This structural shape is especially qualified for small plate heat exchangers. This structural shape is although qualified for plate heat exchangers which should streamed vertically.

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape L    This plate heat exc

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape K    An absolute classic

COMFORT DEHUMIDIFIER TTK 26 EWell-rounded drying solution with an appealing design Small in size, impressively high performance Owing to sound technology and excellent performance values the TTK 26 E promises the immediate surroundings dry conditions at all times. The appealing design without corners or sharp edges plays an important role in its high attractiveness and popularity. The both convenient and compact drying solution is perfectly easy to handle: Connect it to the mains and switch it on and the effective TTK 26 E with a dehumidification performance of up to 10 litres begins to operate keeping smaller rooms sized up to 15 m² reliably dry. Special features: Low-maintenance construction Particularly easy handling Convenient cable winder Very compact and light device in its performance class

The SYSTEM-T fully automatic Form-Fill-Seal (FFS) packaging machine combines high quality packaging from a PE tube with high production capacity and is therefore ideal to be used in a wide range of industries including petrochemicals, fertilizers, animal feed, food,... Due to the high flexibility of the FFS packaging machine it can be adapted to different customer requirements. For example, pillow bags and gusset bags can be produced with or without carrying handle and a filling weight between 5kg and 50kg. Additional perforation of the bags is also possible. The SYSTEM-T stands out due to its modern design and a very sturdy and compact construction. Accessibility, generous clearance, long maintenance intervals and low maintenance costs were of major importance in the development of this machine. For example, the large doors offer easy access to all areas and important parts and cable connections are protected from corrosive and aggressive dust by stainless steel housings.

Here, an overview of some practical benefits of the TEH 30 T: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 30 T electric heater - Some technical details: Heat output in kW: 3,3 Heat output in kcal: 2837 Amount of air: 300 m³/h Temperature increase ΔT: 54 °C Power consumption: 13,4 A Power socket: 16 A / Schuko Supply voltage: 230 V / 50 Hz Thermostat: yes Mobility: Portable Sound level: 63 dB (A) Length x width x height: 325 x 260 x 332 mm Weight: 10,6 kg Hose connection: 155 mm

MUNICIPAL AND INDUSTRIAL APPLICATIONS WITH CHAMBER VOLUMES FROM 100 TO 7,000 M3 The LIPP UniCentralmix Digester with its central agitator is designed for industrial and municipal applications. The special feature of this tank, in addition to the central agitator, is the roof construction, with a high quality stainless steel diaphragm cover. The flexible LIPP System ensures each digester can be adapted to each individual application and customer requirements. KEY BENEFITS Energy efficient, central agitator Maximum leak tightness Flexible substrate composition High functional safety Stainless steel diaphragm roof without bolts External heating system available Production on site enables quick construction Low investment costs Low maintenance and durable High quality the world over PRODUCT SPECIFICATIONCENTRAL AGITATOR WITH BOLT LESS STAINLESS STEEL DIAPHRAGM ROOF At the heart of the LIPP UniCentralmix is a stainless steel tank (in Verinox) with a digester chamber

Here, an overview of some practical benefits of the TEH 100: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 100 electric heater - Some technical details: Heat output in kW: 9 - 13.5 - 18 Heat output in kcal: max. 15.400 Amount of air: 1.785 m³/h Temperature increase ΔT: 38 °C Power consumption: 27,2 A Power socket: 32 A / CEE plug Supply voltage: 400 V / 50 Hz Thermostat: Accessory Mobility: Wheels Sound level: 69 dB (A) Length x width x height: 400 x 400 x 480 mm Weight: 29,5 kg Hose connection: 300 mm

Calcium Multipurpose Grease MP3 formulated from Mineral oil thickened by calcium hydroxide . It has Smooth and buttery texture and excellent water resistant property, mechanical stability and lubricating performance. Applications : Used in automotive vehicles , chassis points , king pins and die pins. Also used in Industrial and Construction equipments. Used as maintenance grease in workshops. Used in lubrication of pivots , joints , springs. Benefits : Excellent adhesive property. Minimum leakage and loss in wash due to strong resistance to wear. Well distributed texture. Superior mechanical and shear stability.

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.     Shape LU  This structural s

Displacement and all mechanical values which can be converted to displacements (e.g. compressive and tensile force, strain, torque and vibration) may be measured by this DC/DC displacement sensor. Typical application areas are the measurement of displacement and strain on machines, servo systems, vehicles, on test plants, in civil engineering and tunnel construction. An integrated maintenance-free electronic and a high-level DC output signal provide an easy handling without any problems. Displacement sensors of series 87240 convert a displacement into an analog electrical signal. They consist of a differential transformer with moveable core, an oscillator and a demodulator. These components are integrated and encapsulated in a cylindrical housing made of stainless steel. The sensors are energized by DC voltage, which is converted to AC by the oscillator and brought to the primary coil of differential transformer.

The IEC 6185092 LE Merging Unit is the optimal solution for process bus interfacing. It allows the consolidation of measurements made in the switchyard, feeding protection relays, meters and fault recorders located in the control room. The use of fiberoptical communications makes it inherently safe. By eliminating the majority of copper wiring, the CSN® Merging Unit addresses key technical and logistic challenges affecting the cost of substation design, construction and maintenance. The simple and disturbancefree architecture of the open IEC 6185092 process bus allows operation of relay, meter and faultrecording equipment of different manufacturers on the same bus. The IEC 6185092 LE Merging Unit collects data from conventional instrument transformers and converts the analog signals into a digital protocol

Rentaload offers for commissioning tests on datacentres the rental of SMART and connected load banks . This equipment makes it possible to test all levels of electrical and thermal redundancy of infrastructures, from the end of construction, renovation or during maintenance operations: Test of the main electric chain; Emergency electrical chain test and emergency equipment test; Test of the room cooling system. Rentaload also offers, in addition to the rental of load banks, a whole range of associated services (delivery, installation and connection, assistance with tests or complete commissioning). Today, Rentaload’s expertise in this type of test is known and recognised throughout Europe.

COMMERCIAL VEHICLES, VEHICLE, TIPPER & CONTAINER CONSTRUCTION, MAINTENANCE As an authorized partner of Scania, Meiller, and Palfinger, we're your go-to for all service and maintenance work, as well as the development and construction of special vehicles. With extensive experience in waste disposal and recycling, we're well-equipped to deliver top-notch results using cutting-edge technology. Benefit from our expertise and explore the diverse opportunities. SPECIAL VEHICLE CONSTRUCTION: UNIQUE REQUIREMENTS - CUSTOM SOLUTIONS Our team of highly qualified professionals designs and builds special vehicles tailored to your needs. No challenge is too big for us, thanks to continuous training and vast experience, ensuring precise solutions. Professional execution and state-of-the-art technical equipment are our standards. Contact us today for more information and offers!

Professionals who benefit from using lever hoists include construction workers, riggers, maintenance technicians, and contractors. Specifically, lever hoists can be utilized for hoisting loads onto the scaffolding, positioning heavy equipment, pulling vehicles out of difficult situations, and securing loads during transportation. They offer a portable and versatile solution for lifting and pulling heavy loads, providing a high mechanical advantage and precise control over the operation. Ronix RH-4111 is designed in such a way to not only excel in all of the aforementioned scenarios but offer numerous safety and quality-of-life benefits as well. Keep scrolling to learn more about its main features and capabilities.

The powerful PZM-170 grain thrower has productivity up to 170 tons per hour. With its help it is possible to carry out quick loading of grain into grain carriers, cars, railway cars, containers, barges, trailers, etc. The grain thrower PZM-170 also quickly loads and unloads both low and high grain stores. Another important function that the PZM-170 can perform is the transfer of grain in closed warehouses and in open areas. This is necessary for long-term storage of grain. In the process of grain transfer, its moisture content and contamination by light impurities are reduced. Main advantages of using grain throwers: - versatility - used for loading any transport, storage of any grain in piles up to 9 m high; - energy efficiency and gentle handling of grain; - ability to move by itself and load itself with grain without help of other machines or people; - easy and convenient for people operation and maintenance; - reliable construction with the use of available components.

This wooden corner sofa is an ideal choice for relaxing and enjoying the weather, taking a nap or chatting with friends and family. Thanks to its timeless pallet design, the wooden bench will add a touch of rustic charm to your patio, garden or living room. The seating furniture is made of impregnated pinewood, which makes it durable, weather-resistant and environmentally friendly. This sofa has a sturdy construction and requires little maintenance. It is designed as part of a lounge set, but can also be used as a separate sofa. You can combine it with other modular segments, such as a table, footrest and center sofa, to create your own personal lounge set! Note: To extend the life of your garden furniture, we recommend that you cover the furniture with a water-resistant cover. Cushion colour: black. Material: pine wood, green impregnated. Cushion material: fabric (100% polyester). Corner sofa dimensions: 69 x 70 x 66 cm (W x D x H). Seat cushion thickness: 6 cm.

This 5-piece pallet garden set with cushions is an excellent choice for relaxing and enjoying the weather, taking a nap or chatting with family and friends. The wooden lounge set, with a timeless pallet design, will add a touch of rustic charm to your patio, garden or living room. The garden furniture set is made of impregnated spruce wood, which makes it durable and stable. This set has a solid construction and requires little maintenance. The sturdy table top is ideal for keeping food and drinks within reach. Thanks to the 100% polyester cover and thick filling, the pallet cushions are soft and very comfortable. In addition, the modular design makes it possible to place the set in any desired composition. Please note, wood is a natural product and can therefore show irregularities.

The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. — Efficient heat and process heat for low running costs and emissions — Compact design for easy positioning and quick heating — Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C — Project-specific control solutions and optional real-time monitoring — Complete system from a single source, low-emission or CO2-neutral customer-specific operation possible — Proven and maintenance-friendly construction for a long service life and reliability — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

With its compact dimensions and zero inside turning radius, the Genie® GS™ - 3246 scissor lift is ideal for indoor and outdoor construction, maintenance and installation on level ground and in confined spaces Max. working height 11.75 m Max. basket capacity 318 kg Drive type Battery Own weight 2800kg

Garage fans is a collective name for the different types of fans used for ventilation of underground parking garages. Often, ventilation systems in garages are made up of classic duct systems. Instead, we offer complete systems with impulse fans for garage ventilation. Functions and advantages of impulse and induction systems compared to traditional duct systems: Easier and faster installation Lower construction costs Less maintenance Airier feeling (fewer things on the roof) Our many years of experience and large product range give our customers peace of mind. Development. the design and manufacture of fans for garage ventilation is carried out with the highest precision and with the highest quality materials. The fans are usually delivered as a complete ventilation system consisting of all fans, control units and other accessories.

FLAT LED is highly suitable for integration into the increasingly more compact machines, because this integrated machine luminaire is particularly small and powerful. Its 6 LEDs provide optimum area light in spite of its compressed construction and low integration depth. • Maintenance-free LED technology • Strong high-power LEDs for maximum light • Robust aluminium housing with safety glass screen • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Ideal for high mechanical and thermal stress • Nearly flush-mounted installation • Prevents accumulation of chips • Direct connection to machine voltage

The MACH LED PRO model series embodies absolute variability in terms of area lighting. Even though the machine design requirements tend to be individual, they are not necessarily tailored to the luminaire. This is taken into account in the MACH LED PRO by designs of different lengths with 1, 2, 3 or 4 LEDs and two beam angles of 30 ° and 95 °. This means that the luminaire practically disappears inside the machine wall thanks to the unique construction principle. • Maintenance-free LED technology • Strong high-power LEDs for maximum light • With narrow- or wide-beam illumination characteristic, as desired • Robust aluminium housing with solid safety glass screen • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Ideal for high mechanical and thermal stress • Nearly flush-mounted installation • Prevents accumulation of chips • Direct connection to machine voltage

-range of rotation up to 270° -2 swivel castors Ø 175 mm and 2 fixed castors Ø 200 mm made of solid rubber, both swivel castors with brake -safe pick-up guaranteed; drum is held by the tension band at the front and spindle at the top with crank handle and self-braking gear box Types available Type L/E electric-hydraulic construction fitted with maintenance-free battery 12V/88Ah and charger for 230 V mains connection Type L/M hydraulic construction with manual pump

The Belimed Life Science Pharma-Washers were specially developed for the preparation, cleaning and drying of components in contact with the product for the production of drugs or experiments in laboratories. They are characterized by an uncompromising hygienic design, simple operation and low-maintenance construction. The design of the Pharma-Washer and the cleaning procedures have been optimized for highest demands based on many years of experience. Typical applications for the pharma-washers are the cleaning of components in contact with the product in the production, filling and packaging of pharmaceutical products, the cleaning of glassware and equipment for laboratories and the cleaning of transport containers and equipment for use in clean rooms.