Cooling solutions - Import export

At Aldea, we're committed to environmental responsibility with R290 gas to reduce carbon emissions. Our Bigblue devices operate efficiently (-25°C to 43°C), ensuring high outlet water temperatures. Using superior inverter compressor technology, they cut electricity bills. Equipped with high-quality components, including advanced PCB cooling and state-of-the-art evaporators, they guarantee efficient heating, hot water, and cooling. Certified with WaterMark, our double-row plate heat exchangers meet top standards. Compatible with remote monitoring and control systems, our heat pumps offer easy management. With cloud technology, users can remotely access parameters, ideal for industrial facilities or hotels.

VI Series Inrow type Crane Cabin Coolers are bringing breath of fresh air to crane cabins. Process cranes in Steel, Non-Ferrous metals, Mining, Oil&Gas, Cement, Paper, Offshore industries have the most challenging environmental conditions. Extremely dusty and corrosive, very high and low ambient temperatures are enemies of crane cabin coolers and cause failures and stoppages sometimes. Perfect solution on keeping the A/C in protected environment! The whole A/C unit except condenser unit is kept inside on the cabin where is more safe than outside conditions. No worries, we still keep all the precautions for condenser unit too. There are still a lot of options for condenser unit such as Cu/Cu or SS coils as well as various coating options for coil and fans. The models are perfect match with the sizes of E-Panels in Electrical cabins. They are stackable next to each other or to be placed in spread delivering

RAW/E liquid coolers (water, water/antifreeze) operate through a closed circuit, consisting of a finned coil crossed in countercurrent by ambient air. Due to the sizing of the coil, it is possible to achieve process fluid temperatures close to the temperature of the intake air. They are industrial chillers designed for fluids between 0°C up to 70°C, with external temperatures between -10°C and +50°C: cooling powers available as standard from 64 kWf up to 782 kWf, considering a 10°C difference between ambient air and supply water. “RAW” series chillers are environmentally friendly machines: the fluids used in the cooling process are simply water/antifreeze (fluid to be cooled) and ambient air (cooling fluid). In addition, the use of high quality materials allows the achievement of high efficiency values (ratio of kWf rendered in cooling to kW absorbed in power consumption).

The PAD-V adiabatic system is the optimal solution for increasing the efficiency of air systems, with capacities from 75 to 1,100 kW. Dry operation during cold periods: ambient air is drawn in and conveyed to the heat exchange coils (where the fluid to be cooled passes through): no water in the circuit, as during standard dry cooler operations. Energy use is also optimized by electronically modulated fan speeds based on temperatures. Adiabatic operation during hotter periods: outside air passes through the humidifier pack to be pre-cooled, before being conveyed to the finned coils and performing its cooling function: efficiency is increased. This also makes it possible to work at lower ambient temperatures.

It is a cooling tower for industries of any type and for any water quality: very compact, self-supporting, light and long-lasting non-corrodible fiberglass structure.

Searching for an air cooler specific to your application and according to your requirements? In that case Van West Koeltechniek bv is the right partner. We develop and assemble air coolers specifically to your requirements. As the company started almost 100 years ago we prove to be a reliable partner with much knowledge and experience. Our air coolers travel all around the world under private label of our major international customers.

in plastic contrution axial ventilators induced draft anothers models available

Efficient cooling Extremely compact Inexpensive solution Cooling surface 0,15 0,43m2 Easy assembly

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

Our 1500 kW water-cooled chiller is the largest in the Aggreko fleet and can be used on a variety of installations, such as process cooling and air conditioning applications. Whether you have a planned project, or an emergency, we'll find the right solution for your cooling requirements. Portable frame with both 4 point ISO lift facilities and forklift pockets for easy handling. Wide operating range to suit most requirements and fluid off temperatures down to -6°C. Full CE design compliance. Low noise levels. Energy efficient compressor units for low running costs. Easy to read and adjust control panel including inlet and outlet temperatures, system pressure, set point parameters. Adaptive controls maintain very stable temperatures under all system conditions. 3 phase and earth electrical connections, no neutral cable required. Quick and easy to install. Can be used with site condenser water or supplied with stand alone cooling tower. Environmentally friendly.

Whether you need a 200 kW chiller in an emergency, for planned maintenance or supplementary cooling, our expert team can help. We'll find the right chiller hire solution for your cooling requirements. Uses R407c refrigerant for reliability and optimum efficiency. 4 point ISO lift facilities and forklift pockets for optimum portability. Unit base and frame made from heavy-gauge steel. Full CE design compliance. 3 phase and earth electrical connections, no neutral cable required. Designed to plug and play with all Aggreko ancillaries including hoses, pumps, manifolds, heat exchangers, buffer tanks etc Environmentally friendly with zero ozone depletion factor. Low sound attenuation for sound-sensitive projects. Energy efficient compressor units ensure low running costs. Simple to read and adjust control panel. Condenser fan guards provide protection against accidental site damage. Ideal for use across a variety of installations, such as air conditioning and process cooling applications.

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models...

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

This chiller is unique on the global market due to its space saving L-form. The additional space required on the laboratory table is zero! Abracadabra: placed on rotary evaporator the RotaCool virtually disappears completely. The RotaCool is a product to provide a dedicated cooling service to all small bench top Rotary Evaporators. Solution for cooling of rotary evaporators Compact, space-saving design Additional extension plate Ideal for conventional rotary evaporators Robust stainless steel construction Easy operation with only three keys LED temperature display

The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...

A superior cooling solution. Handcrafted in Denmark. Zero Compromises. This space-saving ambient spiral delivers continuous uniform cooling and high production capacities of meat, poultry, seafood, vegetable and baked products. Each product piece is cooled uniformly regardless of its position on the conveyor belt. Temperature, air circulation and conveyor speed are independently adjustable and PLC controlled. Our Edge Drive Ambient Spiral has no internal drum drive, making cleaning simple and efficient. Insulated cabinet and stainless steel construction are built to Danish standards.

At Aldea, we're committed to environmental responsibility with R290 gas to reduce carbon emissions. Our Bigblue devices operate efficiently (-25°C to 43°C), ensuring high outlet water temperatures. Using superior inverter compressor technology, they cut electricity bills. Equipped with high-quality components, including advanced PCB cooling and state-of-the-art evaporators, they guarantee efficient heating, hot water, and cooling. Certified with WaterMark, our double-row plate heat exchangers meet top standards. Compatible with remote monitoring and control systems, our heat pumps offer easy management. With cloud technology, users can remotely access parameters, ideal for industrial facilities or hotels.