Cutting - machine tools - Import export

- Unique control software for complete integration, fast communication between work areas and synchronized positioning accuracy down to a few micrometers for the most complex, high-value-added products. - Servomotor-controlled upper and lower unwind/rewind. - Cutting speed up to a maximum of 56 m/minute. - Laser integration on request, or for specific product requirements that cannot be met by conventional tools. - Closed-loop tension management with integrated sensors on all our unwinders/rewinders. - Configurable from 3 stations; widths from 10″ (250 mm) to 30″ 750 mm. - Stations equipped with independently controlled servomotors, strictest tolerances in the industry. - Operator console with touch-screen option. - Material savings with label mode. - CCD cameras Dedicated to processes fully integrated with our control software. - CE quality.

The preparation of tapes before lamination is often an important step in terms productivity. The new GCM works directly from overlays coils thickness from 0.04 to 0.4 mm with or without magnetic tape. Depending on the machine configuration, the hourly rate reaches 1200 format welded, cut to length and stacked. Benefits Fully automatic suction cup brings a destacker hearts in the process, capacity of 1000 sheets 0.7 mm thick. Cleaning sheets before being fed into the machine, each sheet passes PVC or PET in a special cleaning roller. You do not have to worry about the cleanliness of the cards before lamination. High technology, high precision alignment and positioning hearts compared with magnetic tapes. Depending on the heat size, the magnetic strip can be positioned much higher than the overlay on the bottom. In the assembly process, a special ultrasonic welding of two or three layers fixed with accuracy.

CAR series are designed for cutting and selective cutting total a wide variety of products requiring high accuracy positioning in the cup. Suitable materials paper, aluminum sheet, copper foil, rubber, polymer, paper AL laminated plastic such as PP / LCD / PC / PET / PVC static or anti static materials such as foam made ​​of PU / PE / EPE / EVA etc felt. For printed products blank as a printed mark using optical fiber serving as a sensor or CCD camera. Ideal for labels, printed stickers, plates nominal labels for bar code stickers and tags and rigid. Products for smooth precise cutting and high speed insulating products adhesived, capsules, PP liners, seals and packaging products. BENEFITS A combination of a large volume of production, precise cutting punches with a perfect cut and outer edges. Superb quality of the cut, due to the performance of the tool die punch, the punch mounted on wood that are compatible and interchangeable.

The Flexa automatic roll slitter is robust and designed to meet high-volume production requirements. It can slit rolls of different sizes into narrower rolls. Intelligent remote service: The Stratos 170 can be connected to the Internet for remote assistance, for fast, efficient diagnostics.

Extraction of individual cards from two removable loading magazines The timing belt transporting system moves the cards from one workstation to another in a synchronizes manner Card thicjness measuring station ensuring only one card is fed CNC cavity high speed milling head for up to 60,000 RPM and dust extraction Hot melt tape spoller, puncher, laminating and peel off system to laminate with chip module tape Chip module punching station and pick & places system for chip module implanting in the cavities Bonding on chip into the card cavity Cooling press qtation Data input device Sorting of cards into good and reject magazines PC based control for easy operation Production capacity of up to 3,000 cards per hour Smooth, low impact operation reduces the noise level of hot melt adhesive Modular design Integrated hot melt lamination system Very stable ans consistent production process

Automatic Feeder approximately 1000 sheets per suckers Anti static bar and double sheet detection Gripping and transferring the sheets entering the air bag assembly is driven by a servomotor and ball screw to ensure accuracy in the positioning + 0.1 mm Mark detection for automatic alignment of the sheet by XY two high precision optical lasers + 0.1 mm Detecting printed marks on the Y axis by one laser precision optical alignment and automatic + 0.1 mm positioned at the inlet of the tool Tool punch die cavities horizontal or vertical SYSCO manufacturing Hydraulic quick and silent 5 Tons Stacking cards interchangeable with 6 stores Transferring sheets in output controlled by servomotor and ball screw Evacuation from falling rollers

The T.T. E digt is an electro pneumatic cutting machine with small dimensions also suitable for installation in places with limited space such as workshops. The electricity supply at 230V single phase and the low consumption of compressed air contribute to a still more easy to install. The sectors of use are varied textile, leather, footwear, etc. wherever you need to cut materials length as rubber bands, ribbons, laces, drawstrings, zippers, velcro, straps, shoulder straps, mignon, belts. Depending on the machine configuration, it can cut By cold with scissors blades made of tempered steel and self sharpening cutting light with a maximum of 120 mm; By heat with a heated knife by low voltage electrical resistance, the cutting takes place by thermal fusion (only suitable for synthetic materials) with a 110 mm cutting light and can be equipped with an automatic device for inclined cut; By cold and heat, used separately, directly selectable from the electronic programmer.

Three sets of servo motor position systems, position accuracy +/ 0.2mm. Working capacity up to 57 600 pieces of abrasive disc per 8 hours with two cavity cutting die to cut two plies of roll material. User friendly computer control and 100 cutting program memory provides easy operation. Punch slugs go through punch tube to slug box under head and you can use a vacuum cleaner to clear out the slugs. Cut part auto knock out & stacking system will stack cut parts to preset quantity ready to be packed. This function can save several workers. Auto cutting directly from jumbo rolls can not only simplify manufacturing process, but also achieve material savings up to 15%. Unique stainless steel grid plate feeding device & stacking system can achieve perfect feeding & stacking results for all kinds of non woven felt, Velcro backing

The machine is fully automatic punching and stacking system for GSM cards (Global System for Mobile Communications). It is designed to punch the Subscriber Identity Module (SIM) and scribe a break out line according to the GSM 11.11 standard. BENEFITS Extraction of Individual cards from two removable loading magazines. The timing belt transporting system moves the cards from one workstation to another in a synchronized manner. SIM punching operation is driven by hydraulic system. Scribing of break out lines with pneumatic driven tool knife edge. Removal of waste material into an external container. Automatic stacking of the finished cards in two output removable magazines. Complete CE safety guards. The touch screen monitor makes the machine easy to operate and self diagnostic trouble shooting makes the machine user friendly.

The LM-WR laminating machine is designed to laminate flexible materials like: foam materials, textile, rubber and plastic filmes with single or double-sided adhesive tapes. Multiple layers processing is as well possible. The machine can be configured with single or multiple unwinders, liner removal, slitter system, cross cutter, winders and tables for sheet format handling.

The Die Cutting machine type EDP-N represents the highest automated system to cut various types of materials into the desired shapes. Feeding of material is automatic and managed by a double set of motorized conveyor belts. Machine power permits to cut shapes of various sizes. Supported materials range from light to heavy; different thicknesses can be processed. Depending on the material, more layers can be cut at the same time.

The usable cutting area is available in multiple sizes allowing to process small to extra-large fabrics rolls. The SM-332-TA reaches speeds of up to 90 m/min with an acceleration of 1G with a motion repeatability +/- 0,1 mm. The cutting area is sectioned to concentrate the vacuum power in specific areas. Pressure bar and side grippers for synchronized movement of the conveyor with the fabric. Motorized conveyor belt to maximize cutting accuracy on long lengths. The SM-332-TA can be equipped with an optional motorized unwind system for large rolls with automatic material alignment control and correction and a digital tension control system.

ANY TYPE LARGE SIZE ENVELOPE CLOSE DIE CUTTING FOUR CORNER CUTTING FOR POCKET TYPE AND WALLET TYPE ENVELOPES GENERAL DESCRIPTION Head driven by double chain with frequency converter cushion system to stop at one cutting position with position accuracy ±0.2mm Working capacity up to 400,000 blanks per 8 hours with maximum material stack thickness up to 60mm Die lubrication for clean cuts and longer die life Cutting pad shifter extends pad life Optional adjustable die holder allows for cutting many different sizes of envelope with the same four corner dies, thus saving the cost of expensive dies Maximum blank size 480×550mm (THNC N25) / 600×600mm (THNC N30) Optional pneumatic head center ejector ensures maximum cutting size accuracy for stack material Optional four corner dies Optional front and rear waste removal conveyor belts

Four columns press with mechanical balancing system SYSCO exclusive Cutting power from 30 to 400 Tons Cutting area from 900 x 600 to 2500 x 1200 mm Cutting stroke from 110 to 250 mm 4 manual or motorised mechanical stops accuracy +/ 0.01 mm Trough cutting or kiss cutting on Picard steel plate 60 HRC accuracy +/ 0.01 mm Slow down speed of the bridge 10 mm before touching the material Quick change of dies Touch screen control in different languages Use of electrical, hydraulic and pneumatic standardized Safety guards protection and / or photocells Class 4 Meets C.E. standards

Auto cutting of plastic ISO cards from sheets of stacked and printed material. Available for any commercial sheet format. FEATURES A combination of high volume production, accurate die cutting, and high quality card edges Inboard & outboard ball screw servo driven gripper unit with position accuracy of +/ 0.1mm The shear type male & female die ensures excellent clean cut edges The optical sensors with registration mark tracking system ensure a cut to print accuracy of +/ 0.1mm A card stacking unit with 2 interchangeable magazines, each holding up to 450 cards with a thickness of 0.8mm Scrap web is automatically discharged The touch screen monitor makes the machine easy to operate Complete CE safety guards An air flotation system protects the cards from scratching during the feeding process An auto sheet feeder with trolley holds approximately 1 000 sheets, with a sheet thickness of 0.8mm Special accessories are available for thze accurate punching of contact less plastic cards

Plastic card cutting, collecting, stacking and skeleton web removal system for card manufacturing industries. Available for any sheet size or printed card layout. Available for PVC, PC, ABC, PET a,d paper materials. Cutting credit card assembly, stacking and skeleton storage system for manufacturing ISO cards, available for any size sheet or PCB layout. PRODUCT DESCRIPTION High volume production rate Hihj speed and accuracy Low noise, low vibrations 100% servo motor driven Shear type male & female die sets for clean and quality cards edge Inboard & outboard ball screw servo driven gripper unit with +/ 0.1mm accuracy and precision Laser sensor registration mark tracking system with +/ 0.1mm accuracy Card collecting & stacking units with 2 interchangeable magazines for continuous operation Automatic skeleton web removal system User friendly touch screen monitor and operator interface systems CE approved safety standards

Removing the roller tracks by independent heating up to 220 ° C Adjustable speed of laying tracks up to 5 m / min Manual loading of sheets Side guides adjustable micrometer Winding device holder with the magnetic track detection cell in case of breakage. Mounting Tape with voltage control, and adjustable positioning guides the rollers. Positioning + or 0.1 mm servo motor 0,75 KW Cleaning system with a double face support roller on the output Storage formats tracked on a table with two anti static positioned before the guillotine and before the table Touch screen control friendly, multi lingual (French and / or English), setting and trimming various counts Use of electrical, hydraulic and pneumatic standardized Safety guards for strict compliance with CE OPTIONS MTL 700 NSA automatic loading of sheets Roller and additional heating system for a different bandwidth

The flat-bed, die cutting machine for kiss cutting type NE-FB is designed to process flexible materials such as foams, plastic films, laminated materials, etc.

The directly driven dividing apparatus of the TA3 series are excellent suited for the exact positioning of workpieces or, due to the high speeds, also for round machining of workpieces. The direct drive is absolutely backlash-free and ensures highest dynamics. All dividing apparatus are equipped with an automatic, pneumatically actuated clamping system. The dividing apparatus TA3G180 can be optionally equipped with an automatic hydrodehn clamping system (hydraulic expansion technology). Field of applications Rotation axis for angle positioning of work piece carriers in: Processing centers CNC - grinding machines Tool machines Laser processing machines, etc.

BENCHTOP EUROHOLE CUTTING MACHINE WITH LEVER FPE1-EURO P The FPE1 EURO-P allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather etc. It is suitable for small productions. The punch is easily replaceable and is equipped with an extractor device in rubber to facilitate the extraction of the waste. The punch is an element subject to wear. Robust steel structure. Simple use.

ELECTRICAL EURO-HOLE CUTTING MACHINE FPE2-EURO E The punching FPE2 EURO-E is a silent machine, fast and safe with a sturdy steel frame and powerful electric motor that allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather, etc., with thickness up to 3 mm. The operation is very simple, once the product is inserted under the punch, the euro-hole can be made by an electric pedal, especially useful in soft material houses and therefore difficult to detect from the sensor, or via switch (product presence sensor) positioned on the head of the punching machine. The punch is an element subject to wear.

MECHANICAL CUTTING MACHINE FPE2-EURO M - EURO-HOLE The FPE2-EURO M die-cutting machine is a simple and safe machine with a sturdy steel structure that allows the realization of a 32 mm hole in cardboard, blister, plastic, leather, etc. with thickness up to 3 mm. The punch is easily replaceable and is equipped with a rubber extractor device to facilitate the extraction of the scrap. Operation is manual by mechanical pedal. The punch is an element subject to wear and must be replaced periodically.

Cutting discs from stock

Band saw machine for wood cutting

Deformations that are created by utilizing thermal cutting process causes metal materials to lose their flat form. The materials which are cut by a laser, plasma or oxygen cutter that utilize thermal process can become almost impossible to be in a desired flat form again. This is no longer an issue with the new generation leveler technology. Our new generation leveler touches almost every point of the sheet metal material and can smart process. That way, stressed material can be straightened.

BOSPORAS ADM-1600 coil slitting line, allows sheet metal materials to slit easily, heavy tonnage work to be done and user operator to work faster, easier and productive thanks to our technical team developing it with high-end technologies. BOSPORAS is always among the first ranks in its field with its technical team and many years of experience in coil slitting process while sharing all knowledge and high technologies with the iron-steel industry. Sturdy, effective and long-lasting slitting lines are manufactured with high costs but BOSPORAS investments, experiences and state-of-the-ark technologies offer the world-quality slitting lines for the lowest cost possible while prioritizing the customer satisfaction.

Our coil cut to length line machines have capacity to fulfill the need of cutting the sheet metals between 600 and 1600 mm of width and, 6000 and 30000 kilograms of weight.