Dc dc converters - Import export

The TPS26625DRCR is an electronic fuse based on the TPS26625 base product number from Texas Instruments. It is packaged in a 10 VFDFN Exposed Pad and is designed for surface mount applications. It has an input voltage range of 4.5 - 57V and can support a maximum output current of 880mA. The product is available in Tape & Reel (TR) Cut Tape (CT) Digi-Reel® packaging.Features: • Input voltage range: 4.5V - 57V Output current: 880mA • 10VFDFN Exposed Pad package • Surface mount application • Available in Tape & Reel (TR) Cut Tape (CT) Digi-Reel® packaging Applications: • Automotive DC-DC converters • Battery chargers • Low power applications

This device is a dual center tap Schottky rectifier suited for switch mode power supply and high frequency DC to DC converters. Packaged in D2PAK, this device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. Features ■ Very small conduction losses ■ Negligible switching losses ■ Extremely fast switching ■ Low thermal resistance ■ Avalanche rated ■ AEC-Q101 qualified

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

The amplifier module model 9243 is used wherever measurement signals from strain gauges, potentiometric sensors or DC/DC sensors have to be converted into standard signals. Simply by mounting on conventional DIN-mount rails, it is possible to position the amplifier module on location, in the proximity of the sensor. Especially for rough environments a IP65 version is available. The broad auxiliary power range and the choice between AC or DC permits operation on standard power supplies used in switch gear cabinets. A highly precise reference voltage source is built-in for calibration purposes. A calibrating shunt can also be connected via two separate terminals. This permits deliberate detuning of a strain gauge sensor for calibration or merely to check the measuring chain.

"DC~DC/AC~AC voltage and frequency converters fulfill the needs of continuous business activities in different areas. Improved reliability, sensibility in operating parameters makes it an essential solutions for critical loads"

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

The TXB0104QRUTRQ1 voltage translator and level shifter from Texas Instruments is a four-channel, bidirectional, low-voltage translator capable of operating from 1.2 V to 3.6 V or 1.65 V to 5.5 V with a maximum supply voltage of 5.5 V. It has an ultra-low quiescent current of 3.5 µA and an operating temperature range of -40°C to +125°C.

Personalized cutouts on the doors, dedicated fixing accessories inside based on the make and type of circuit breakers, powder painted up to C4H corrosion class acc ISO 12944.

Thanks to the intelligent combination of DC fans with a fully integrated AC/DC converter, AC fans can now be operated at speeds that are independent of the power frequency. Up to 4500 rpm can be realized and the flow rate significantly increased if required. The EC generation in the dimensions 80mm to 280mm and with several different speeds replaces the previous AC fans in situtations where there is no DC voltage available and requires less power in the process. The previous AC fans can be replaced without restriction as the EC fans have identical dimensions and thickness. The versions that are smaller than 180mm have a wide-range input and can be connected without problem, worldwide to all AC voltage networks without need for further adaptation. This is underlined by the UL approval of the entire fan series.

LEGA ENERGY TURKEY/LEGA ENERJİ TÜRKİYE // *Line Interactive UPS *Monophase In Monophase Out UPS *Triphase In Monophase Out UPS *Triphase In Triphase Out UPS *RACK MOUNT UPS *Triphase In Triphase Out UPS With TRANSFORMER(T SERIES) //

Advantages of MANKAR® ULV spraying systems Very precise, sharp output with a merely minimal risk of drift »saves money while preserving the environment and conserving cultivated plants! Low herbicide comsumption thanks to ULV technology »economical and enviromentally friendly! (up to 80% lower herbicide consumption) Optimal herbicide coverage due to the defined narrow droplet size spectrum »particulary efficient utilisation of the active substance Considerably lower weight due to undiluted application »lower degrees of soil compaction, reduced levels of back strain! No mixing or measuring herbicides and no water needed »saves time! Independent of the water supply source! Drive is by means of rechargeable batteries or vehicle power (DC/DC converter) »low engergy consumption, very quiet! Can be adapted to different areas of applications thanks to a variety of models with variable spray widths. »an optimal spray unit designed precisely for YOUR application needs!

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1%

NSBon-49 is a high-efficiency isolated DC-DC converter with ultra-wide input voltage range and 12 or 24 VDC output. The most important application of this power converter is powering user's equipment that requires 12 or 24 VDC power and must be installed into outdoor access node or uninterruptable power supply cabinet with single 48V DC UPS system inside. 48VDC UPS is the most used UPS for outdoor access nodes because 48VDC power is required by most PoE switches. Therefore NSBon-49 power converter allows to install devices with different power requirements into the outdoor cabinet with single 48 VDC UPS system and helps to save space and solution cost. NSBon-49 can be used for powering LTE/4G routers, NVR's, access controllers, sensors etc. NSBon-49 has input under-voltage protection, output short-circuit, over-voltage and over-current protection. So using NSBon-49 power converter together with 48VDC UPS allows to provide uninterruptable power supply to 48V PoE switches and 12/24V

Introduction • Aluminum Electrolytic Capacitor As an electrolyte, a capacitor is a mixture of a conductive polymer and an electrolyte. • Conductive polymer hybrid aluminum electrolytic capacitor capable of dielectric self-recovery. Features • Excellent ripple characteristics • Very low ESR • Excellent low temperature characteristics (-55 ℃) • Resolving the risk of short (dielectric self-restore function) Applications • Automotive -Engine Control Unit -Auxiliary power for Drive Video Record System -Electric pump controller -DC-DC converter • Communication equipment -5G repeaters • Household appliances -Vacuum cleaner (BLDC motor) -TV SMPS • Medical devices

The CAN-USB/2 module is an intelligent CAN interface with an ARM 7 microcontroller for the local management of CAN data. The module supports the USB 2.0 High Speed interface with data rates of 480 Mbit/s. The ISO 11898-compliant CAN interface allows a data transfer rate of a maximum of 1 Mbit/s. The CAN interface is electrically isolated from other potentials by means of a digital isolator and a DC/DC converter. Software drivers for Windows® 2K/XP/Vista/7/8 (32/64 bit) are included in delivery. Linux® kernel ≥ 2.6 is supported via Linux CAN (SocketCAN) and NTCAN wrapper library. Drivers for other operating systems are available on request. The firmware can be updated from the PC. Updates are available on the esd website. Libraries for the higher layer protocols CANopen and J1939 are available. Additional free-of-charge esd CAN tools for Windows offer efficient setup and analysis of CAN applications and networks.

Stationary AC or DC powered converter for full pipe flowmeter sensors The ML210 is a stationary converter for full pipe sensors. It is either AC or DC powered. The ML210 is suited for connection to the following sensors for full pipe measurements: AVI-MAG (Multi-Mag for Russia or CIS-countries) SPI-Mag 1” & 2” Flo-Pipe Model FP180 & Model FP181 SEWER-MAG MAG-METER MS1000 & MS2500 When combined with one of the above mentioned sensors the ML210 with its 4-20 mA and contact closure outputs becomes a powerful full pipe flowmeter and data reporting system. The ML210 provides users with a reliable solution for full pipe stationary flow monitoring applications. The standard model includes: an IP67 enclosure; a 3-key numerical key pad; a graphical backlit LCD display, 100-265 VAC or 10-36 VDC power supply, 1 0/4-20 mA output and 2 Pulses/Alarm outputs.

Standalone version of the IMCU including: 1. power supply (DC/DC converters), global protection and management 2. power amplifier directly controlled by DSP providing a large configuration, protection and measurement possibility 3. Optimal control in relation with EMC and efficiency 4. Specific for each application mezzanine board to interface applied position sensor devices s LVDT, resolver, incremental etc. 5. Possible implementation on the CAN bus 6. Internet/WiFi/Bluetooth user's interface based on the Raspberry module 7. Implemented open source firmware 8. Possibilities to direct programing implemented DSP from Simulink@ model

The versatile Cinergia GE/EL+ vAC/DC Regenerative Converter combines all Cinergia models in one unit. A 4 quadrant AC Grid Emulator and AC regenerative load combined with a bi-directional DC power supply and regenerative DC load. This makes the unit widely usable in many applications. Think of battery testing, battery characterisation, battery emulation, PV panel simulation and testing of solar inverters. The simulation of smart grids and micro grids and the testing of bi-directional inverters are strongly on the rise, this to support the electricity grid. The built-in amplifier also makes the unit suitable for Power Hardware In the Loop (PHIL) testing. In short, a high-performance machine that feels at home on all terrains. The Cinergia GE/EL+ vAC/DC is available in 13 models with power ratings from 7.5kW to 160kW. This can be extended to >2MW by connecting several units in parallel.

MCB Electronics has designed and developed a versatile comprehensive customizable AC input DC output power supply: Power-Spin. An AC-DC power supply is a power electronic converting equipment which can convert alternating current (AC) into direct current (DC) with variable output voltage and current. The input and output electrical parameter range differs with equipment model, please refer to specific product data sheet for detailed product characteristics. MCB Power-Spin fits a wide array of applications such as powering: - UAV and Wind Tunnels test stands - special Household Appliances - particular automotive components - batteries for testing purpose MCB Power-Spin can support in input any worldwide AC mains electricity according to the required specifications provided by the customer: